In-Wall & Ceiling SpeakersIn-Ceiling Speakers
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Ceiling Speaker Support Split Ring to suit...C2164 |
| Designed to be installed with the One-Shot ceiling speakers, these ceiling ring supports the ceiling tile to minimise sag and reduce damage to soft tiles. Recommended for use with mineral fibre and acoustic ceiling tiles. Split ring design for | ||
 |
Ceiling Speaker Support Pan to suit 100mm ...C2143 |
| Designed specifically to be installed with the Redback 'One-Shot' ceiling speakers, these pans support the ceiling tile to minimise sag. Recommended for softer material ceiling tiles. Note: When installing, the lip must face upwards so that the pan | ||
 |
Ceiling Speaker Support Pan to suit 3 Clip...C2163 |
| Designed to be installed with the One-Shot ceiling speakers, these pans support the ceiling tile to minimise sag and reduce damage to soft tiles. Fits inside the "T-bars" for maximum support for the tile. Recommended for use with mineral fibre | ||
 |
Ceiling Tile Bridge to suit 3 Clip Fire Ra...C2165 |
|
| Designed to be installed with the One-Shot ceiling speakers, these pans support the ceiling tile to minimise sag and reduce damage to soft tiles. Fits inside the "T-bars" for maximum support for the tile. Recommended for use with mineral fibre | |
 |
Ceiling Speaker Support Pan to suit 200mm ...C2129 |
| Designed specifically to be installed with the Redback 'One-Shot' ceiling speakers, these pans support the ceiling tile to minimise sag. Recommended for softer material ceiling tiles. Note: When installing, the lip must face upwards so that the pan | ||
 |
200mm (8") 10W 8 Ohm White One-Shot Ceilin...C2140 |
|
| Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. | |
 |
100mm (4") 10W 8 Ohm White One-Shot Ceilin...C2144 |
|
| Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. | |
 |
100mm (4") 5W 100V Twin Cone EWIS Fastfix ...C2122C |
|
| These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting system. Typical applications include medical centres, shopping malls, restaurants, bou | |
 |
100mm (4") 5W 100V White Low Profile One-S...C2150 |
|
| Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings fo | |
 |
100mm (4") 5W 100V White One-Shot Ceiling ...C2168C |
|
| This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility. | |
 |
100mm (4") 5W 100V Black One-Shot Ceiling ...C2169 |
|
| This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility. | |
 |
200mm (8") 5W 100V White One-Shot Ceiling ...C2132 |
|
| Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for | |
 |
200mm (8") 5W 100V Black One-Shot Ceiling ...C2133 |
|
| Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings fo | |
 |
200mm (8") 5W 100V White EWIS One-Shot Cei...C2134C |
|
| Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings fo | |
 |
100mm (4") 10W 100V White One-Shot PA SpeakerC2157 |
|
| Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. | |
 |
200mm (8") 5W 100V Black EWIS One-Shot Cei...C2135 |
|
| Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings fo | |
 |
165mm (6.5") 5W 100V Twin Cone Fastfix Cei...C2123 |
|
| The C 2123 is a 165mm (6.5") dual cone speaker with a 5W transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting system. Typical | |
 |
200mm (8") 15W 100V Twin Cone EWIS White O...C2136 |
|
| Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. | |
 |
200mm (8") 5W 100V Twin Cone Fastfix Ceili...C2125 |
|
| The C 2125 is a 200mm (8") dual cone speaker fitted with a 5W transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting system. Typ | |
 |
165mm (6.5") 30W Coaxial 2 Way Fastfix Cei...C2119 |
|
| Stylish, high performance, architecturally unobtrusive speaker/grille combinations which can be painted to match decor. Super easy to install with a "Flip- Lock" mounting system. | |
 |
200mm (8") 5W 100V EWIS Ceiling Speaker Vo...C2134VC |
|
| An 8" 200mm One-Shot 100V line PA speaker fitted with a volume control in the middle of the grille. Ideal for use in areas where local volume needs to be lower or higher than the overall zone volume level. | |
 |
200mm (8") 50W 8 Ohm White One-Shot Ceilin...C2130 |
|
| Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. | |
 |
200mm (8") 15W 100V Twin Cone EWIS Fastfix...C2126B |
|
| These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting system. Typical applications include medical centres, shopping malls, restaurants, bou | |
 |
200mm (8") 5W 100V EWIS Ceiling Speaker Vo...CB2134VC |
|
| An 8" 200mm One-Shot 100V line PA speaker fitted with a volume control in the middle of the grille. Ideal for use in areas where local volume needs to be lower or higher than the overall zone volume level. | |
 |
200mm (8") 5W 100V Twin Cone Fastfix PA Ce...C2127A |
|
| C 2127 is a 200mm (8") dual cone speaker fitted with a 5W transformer. | |
 |
165mm (6.5") 5W 100V Twin Cone Fastfix Cei...C2186 NEW |
|
| The C2186 is a 165mm (6.5") dual cone speaker with a 5W transformer. | |
 |
100mm 100V 5W Ceiling EWIS Speaker White P...C2170 |
|
| Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. | |
 |
100mm (4") 15W 100V IP55 Fastfix Bathroom ...C2097 |
|
| This IP55 rated bathroom speaker, employs a 100mm high performance driver, constructed from an all-weather polypropylene cone and rubber surround. Fitted with a high quality 100V line matching transformer tapped at 2.5, 5, 10 & 15W. Installation | |
 |
165mm (6.5") 30W Coaxial 8 Ohm Fastfix Cei...C2179 |
|
| Stylish, high performance, architecturally unobtrusive speaker/grille combinations which can be painted to match decor. Super easy to install. | |
 |
165mm (6.5") 15W 100V Coaxial 2 Way Fastfi...C2121 |
|
| The C 2121 is a 165mm (6.5") high power coaxial speaker fitted with a 15W transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting. | |
 |
100mm 100V 5W Ceiling EWIS Speaker White G...C2160A |
|
| Version of C 2160 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. | |
 |
200mm (8") 45W 8 Ohm Coaxial 2 Way Fastfix...C2124 |
|
| The C 2124 is a 200mm (8") 8&Omega 45W coaxial speaker. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting system. Typical applications | |
 |
100mm 100V 5W Ceiling EWIS Speaker White G...C2160 |
|
| Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. It features flame retardent housing material, sealed cable gland entries and a tuned PA driver to suit the new approval requirements. | |
 |
100mm 100V 5W Ceiling EWIS Speaker Black P...C2171 |
|
| Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. | |
 |
200mm (8") 5W 100V EWIS Fastfix Ceiling Sp...C2184 |
|
| This speaker is a stylish, high performance, architecturally unobtrusive speaker/grille combination which can be painted to match decor. It also features a magnetic fit "edge to edge" steel grille for a near flush finish | |
 |
100mm 100V 5W Ceiling EWIS Speaker White M...C2260A |
|
| Version of C 2260 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. | |
 |
100mm 100V 5W Ceiling EWIS Speaker White M...C2260AB |
|
| Version of C 2260 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. | |
 |
200mm (8") 45W 8 Ohm Coaxial 2 Way Black F...C2174 |
|
| The C 2174 is a 200mm (8") 8&Omega 45W coaxial speaker. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting system. Typical applications | |
 |
100mm 100V 6W Ceiling EWIS Speaker White M...C2270 NEW |
|
| Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. | |
 |
100mm 100V 5W Ceiling EWIS Speaker Black G...C2161A |
|
| Version of C 2161 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. | |
 |
100mm 100V 10W Ceiling EWIS Speaker White ...C2172 |
|
| Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. | |
 |
100mm 100V 5W Ceiling EWIS Speaker White M...C2260 |
|
| Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. It can also be used for standard 100V PA/BGM installations. | |
 |
100mm 100V 5W Ceiling EWIS Speaker Black G...C2161 |
|
| Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2171. At only 65mm overall height, these models are ideal for low profile ceiling spaces. It features flame retardent housing material, sealed cable gland entries and a tuned PA driver to suit the new approval requirements. | |
 |
100mm 100V 5W Ceiling EWIS Speaker Black M...C2261A |
|
| Version of C 2261 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. At only 65mm overall height, these models are ideal for low profile ceiling spaces. | |
 |
100mm 100V 6W Ceiling EWIS Speaker Black M...C2271 NEW |
|
| Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. | |
 |
100mm 100V 5W Ceiling EWIS Speaker Black M...C2261 |
|
| Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. | |
 |
165mm (6.5") 15W 100V Coaxial 2 Way Fastfi...C2188 |
|
| Features a magnetic fit 'edge to edge' steel grille for a near flush finish. | |
 |
200mm (8") 15W 100V Coaxial 2 Way Black Fa...C2178 |
|
| The C 2178 is a 200mm (8") high performance 45W coaxial speakers fitted with a 15W transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' | |
 |
200mm (8") 15W 100V White One-Shot Ceiling...C2142 |
|
| Specially engineered to deliver 100dB 1W/1m @ 1kHz for use in PA and fire evacuation systems where a high level of SPL and speech intelligibility is essential. Includes 15W 100V transformer, 4 way wire protect terminal block & 22μF bipolar capacitor. | |
 |
200mm (8") 15W 100V Coaxial White One-Shot...C2138 |
|
| Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. |