|
Description |
Downloads |
Specs |
Ordering |
|
|
K1134 |
|
|
|
This cheap and easy to build kit has been designed to help combat zika and other mosquito borne viruses. It lures male mosquitos into a trap by producing an inaudible tone which attracts them. The female mosquito is the culprit for the painful bites which are not only uncomfortable, but spread some very nasty viruses. |
|
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
|
K8104 |
|
- Dimensions: 110 x 90mm (PCB)
- Power Supply: 3Vdc (2 x AAA Batteries)
|
|
Brightly coloured bug-shaped miniature robot. The microbug is always hungry for light, it drives towards it. Two open-chassis subminiature motors, adjustable light sensitivity suits almost any light intensity. |
|
SM9137F |
|
- 1/2.7” CMOS sensor with 1080P video output
- Low light sensitivity of 0.1 Lux / F1.6(Wide)~F2.8(Tele), 0 Lux (IR LED ON)
- EZUM series to support focus and camera parameters adjustment remotely from AVTECH HD CCTV DVR
- Manual adjustment of the IR LED brightness
- Day and night 24-hour surveillance with IR effective distance up to 50 meters
- IP66 for weather-proof application
- Camera parameters adjustable when used with AVTECH HD CCTV DVR
|
|
Surface mount bullet camera housed in vandal resistant aluminium housing with infra red illumination for night time viewing. High resolution CMOS sensor produces clear crisp video signal. Motorised zoom |
|
SM9123F |
|
- 1/2.7” CMOS sensor with 1080P video output
- Low light sensitivity of 0.1 Lux / F1.6(Wide)~F2.8(Tele), 0 Lux (IR LED ON)
- EZUM series to support focus and camera parameters adjustment remotely from AVTECH HD CCTV DVR
- Manual adjustment of the IR LED brightness
- Day and night 24-hour surveillance with IR effective distance up to 50 meters
- IP66 for weather-proof application
- Camera parameters adjustable when used with AVTECH HD CCTV DVR
|
|
Surface mount dome cameras housed in vandal resistant aluminium housing with infra red illumination for night time viewing. High resolution CMOS sensor produces clear crisp video signal. Motorised zoom |
|
K6027 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
This MPPT charge/Light controller will work with 12V or 24V solar panels to charge a 12V or 24V lead-acid or lithium iron phosphate battery. you can then use the battery to run 12V dc lighting. |
|
S9379 |
|
- HD Video Recording
- HD real-time recording brings users clear images while video recording and playback - 1920*1080 Full HD video output service, giving the best image quality on LCD / LED monitors.
- Multi-platform Remote Access
- Fully compatible with iPhone & iPad, and Internet Explorer on Windows operating system - AVTECH free CMS program on both Windows and MAC OS
- Powerful Storage Capacity
- Support up to 3 hard disks for long-term recording and saving large amount of recording data.
- Smart Recording
- High video resolution switch for events to optimize the recording efficiency of the hard disk.
- External Disk Array Support for More Video Storage
- eSATA interface built-in to connect a disk array (up to 4-bay disk array with RAID 0 and 1) for more video storage.
- Full HD HDMI Video Output
- 1920*1080 Full HD video output service, giving the best image quality on LCD / LED monitors.
- RS485 Communication
- Capable of external device connection to extend the functionality and flexibility of your NVR.
|
|
These network video recorders are designed to capture streams from up to 25 IP cameras with event notification via a remote monitoring app for Android or iOS devices. |
|
K2546 |
|
- Customisable animal characters and scenes
- Soft light RGB LED with nice transitions
- RoHs-free, soft edge PCB with immersion-gold, environment-friendly
- Battery life up to 48 hours
- Assemble Time: 2 hours
- Ages 6 and up
|
|
This DIY soldering kit contains everything you need to create simple circuits with minimum level electronics and soldering. Kids will be introduced to the basics of circuit, soldering and take the opportunity to play with LEDs, batteries. |
|
Z6560 |
|
- 11 levels of speaking speed
- Supports Chinese and english languages
- Both male and female voice supported
- Use the Serial ports of your Arduinos only
|
|
This Speech Synthesis Shield is designed to be easily stacked upon any standard arduinos. It uses a XFS5051CE speech synthesis chip from IFLYTEK which combines world leading technology and high degree of integration. |
|
P7508A |
|
|
|
Filtered VGA DE15 High Density Male-Male Lead, 20m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
|
Z6382 |
|
|
|
Great for security or web cam projects.
Detects movement from humans or animals. Range 0-7m.
Detector angle 110°. 5V input. 32x24mm. |
|
Z6352 |
|
|
|
Uses an IR LED and optical transistor to detect pulse on the surface of the skin. Can be easily attached to a velcro strap or ear clip. 3-5V input. 15mmØ. |
|
H4183 |
|
- Smooth outer surface ensures installer safety.
- Nylon coating reduces friction or cutting against cable sheathing.
- High 61kg tensile strength.
- Can be used in high corrosion or chemical laden environments
- Particularly suitable for use in marine environments or salt prone areas
- Exceptional resistance to weathering and fire.
- RoHS compliant
- Tapered end for easier insertion
- Roller ball locking mechanism
- Non-removable locking design
|
|
Commonly used steel ties for securing conduits, pipes, signs etc. Ball locking mechanism type - non-removable. 4.6mm tensile strength 61kg. |
|
P0671 |
|
|
|
Measures 6-30V DC @ 10A max with internal shunt. Designed to fit P or P 0681, but can also be used standalone. 28mm mounting hole. 19mm thread length (max material thickness). |
|
P7507A |
|
|
|
Filtered VGA DE15 High Density Male-Male Lead, 15m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
|
Z6349 |
|
|
|
The "lilypad" form factor allows easy building of sewable electronics and e-textile projects. Can be used with Z 6368 LED sequins. It has 14 digital input/output pins (of which 6 can be used as PWM outputs) and 6 analog inputs. 50mmØ. |
|
K9350 |
|
- Adjustable door strike activation period. Adjustable from 1-255s
- Kit includes pre-punched wall-plate to suit fingerprint sensor
- Easy setup (enrolments and deletions) of users’ fingerprints via control panel
- Inbuilt security features to detect tampering
|
|
Do you hate carrying keys? The Fingerprint Access Controller can store and recognise up to 20 fingerprints and can give access to your home or workplace at any time, day or night. |
|
H4166 |
|
- High 61kg tensile strength.
- Can be used in high corrosion or chemical laden environments
- Particularly suitable for use in marine environments or salt prone areas
- Exceptional resistance to weathering and fire.
- RoHS compliant
- Tapered end for easier insertion
- Roller ball locking mechanism
- Non-removable locking design
|
|
Commonly used steel ties for securing conduits, pipes, signs etc. Ball locking mechanism type - non-removable. 4.6mm tensile strength 61kg. |
|
T1925 |
|
|
|
This construction pen features a two way scale ruler, tablet stylus, blade screwdriver, philips screwdriver and botle opener. All housed in a tough metal casing. |
|
ST9137F |
|
- TVI technology which allows transmission of 1080p video over existing coaxial cable
- 1/2.7” CMOS Sensor
- 1080P video output
- Low light sensitivity of 0.1 Lux / F1.4(Wide)~F2.8(Tele), 0 Lux (IR LED ON)
- Day and night 24-hour surveillance with IR effective distance up to 25 meters
- IP66 for weather-proof application
|
|
Suited for outdoor installations requiring a focal adjustment coupled with high quality 1080p CMOS sensor. The superbly constructed all-metal enclosure and 3-axis bracket allows easy adjustment even after the unit has been installed. |
|
ST9123F |
|
- TVI technology for transmitting 1080P 30fps video over existing coaxial cable
- 1/ 2.9” CMOS Sensor
- 1080P video output
- f2.8 ~ 12mm vari-focal lens
- Low light sensitivity of 0.1 Lux / F1.4(Wide)~F2.8(Tele), 0 Lux (IR LED ON)
- IP66 for weather-proof application
- Day and night 24-hour surveillance with IR effective distance up to 20 meters
|
|
This 1080p TVI CMOS dome camera housed in a vandal resistant weatherproof IP66 aluminium case. Specially designed for installations where damage resistance is paramount. |
|
SA9137F |
|
- TVI and HD-SDI both are HD-over-coaxial solutions. However, bottlenecks seen in HD-SDI applications still remain, such as transmission distance, storage, and total cost. Now, TVT has successfully developed the TVI solution, which is able to solve HD-SDI's previous problems by acquiring 90% of HD-SDI technology but conducting analog transmission via coaxial cable. TVI can convert the digital signals to analog ones; it extends the transmission distance, reduces the total cost, and takes less storage capacity. Its' transmission distance is ranged from 300 to 500 meters via coaxial cables.
- Furthermore, TVI transmits CVBS 75ohm analog signals, with resolution in 1080P and 720P at 30 frames per second, which is hard to be achieved by other HD-over-coaxial solutions. Users even can just change their old analog cameras and DVRs with TVI cameras and DVRs to get a brand new1080p surveillance system, without requiring any other professional knowledge or extra labor cost.
|
|
Suited for outdoor installations requiring a focal adjustment coupled with high quality 1080p CMOS sensor. The superbly constructed all-metal enclosure and 3-axis bracket allows easy adjustment even after the unit has been installed. |
|
SA9123F |
|
- TVI technology for transmitting 1080P 30fps video over existing coaxial cable
- 1/ 2.9” CMOS Sensor
- 1080P video output
- f2.8 ~ 12mm vari-focal lens
- Low light sensitivity of 0.1 Lux / F1.4(Wide)~F2.8(Tele), 0 Lux (IR LED ON)
- IP66 for weather-proof application
- Day and night 24-hour surveillance with IR effective distance up to 20 meters
|
|
This 1080p TVI CMOS dome camera housed in a vandal resistant weatherproof IP66 aluminium case. Specially designed for installations where damage resistance is paramount. |
|
S4736
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.7V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 47.0g max
- Cell Dimension: Height: 65.00mm max, Diameter: 18.40mm max,
- Operating Temperature: Charge: 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature 1 year: -20~25°C, 3 months: -20~45°C, 1 month: -20~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
S4732
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ± 0.05 V
- Nominal Voltage: 3.63V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 45.0g max
- Cell Dimension: Height : 65.00mm max, Diameter : 18.40mm max
- Operating Temperature: Charge : 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature: 1 month: -20~60°C, 3 months: -20~45°C, 1 year: -20~25°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
C1006B |
|
- Rugged moulded ABS construction
- Cast aluminium frame bass driver with large voice coil diameter
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- 4 rigging points
|
|
A high power design which is suited to bands, DJs and venues where excellent quality, temporary sound is required. In-built carry handles make set up a breeze. Balanced input and output. Adjustable bass, treble & volume. |
|
N2012 |
|
- Suits lead acid or gel battery systems
- Automatic fuse protection
- Battery overload & deep discharge protection
- Automatic 12/24V voltage selection
- Reverse polarity protection
- Short circuit protection
- Status LEDs
- Diode protection
|
|
A basic solar charge controller for permanent installations of lead acid or gel battery solar panel systems. It features a 3 stage charging sequence (boost, float and equalise). LEDs are provided to indicate working status - normal, fault, overload and low battery. Suitable for 12V or 24V systems, the charger automatically detects the connected b |
|
C0939 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
- Available in 8 ohm or 100V line multi-tap versions.
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |
|
P7347 |
|
- Ethernet channel
- Audio return channel
- 4k x 2k resolution support
- 3D over HDMI®
- 18Gbit/s (340MHz) bandwidth
- HD resolution 1920 x 1080 and 4k
- HDCP compliant
- Supports 48 bit Deep Colour
- Supports Dolby® Digital & DTS®
- Supports Dolby® TrueHDTM & DTS®-HD Master Audio
|
|
Supplied without packaging. Bulk lead for installers and OEMs. HDMI certified. High performance and V2.0 compliant. Supports 4K resolutions at 60fps. |
|
P0672 |
|
- Compact size
- Digital LED display (3 digits)
- Self-powered from the measuring DC voltage (2.5-30V DC)
- Floating decimal point for better resolution below 10V
- Completely sealed design (IP67)
- Reversed polarity input protection
|
|
Designed to be used with the accessory panels listed above, but can also be used standalone. 30Ømm mounting hole. Fitted with 120mm flyleads. |
|
K1111 |
|
- Altronics are one of Australia's leading suppliers of educational electronics kits to schools, science workshops and institutions. Our kit range aims to introduce kids with curious minds to the concepts of electronics, solar power, robotics and DIY construction.
- If your organisation requires kits for your science curriculum, simply apply for an instant 30 day institutional account. This account offers bulk buying rates to ensure your organisation gets the most science for their budget!
|
|
An environmentally friendly motorcycle powered by a salt water fuel cell. A great way to learn about alternative energy ideas. No batteries required! Includes 3 fuel cell sheets. Approx length 130mm. Can be assembled in under an hour. |
|
P5961 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA and three RCA connections. Supplied with two facia covers to suit your decor. |
|
M8544 |
|
|
|
These compact desulphation units connect between the positive and negative terminals of your battery and provide high frequency pulses to break down sulfation on battery plates and provide additional service life. |
|
C1002B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
|
C0998B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
|
Z6313 |
|
- UNO R3 compatible board
- I2C1602 LCD
- Plastic packing box
- USB cable
- 3 pin sensor wires x 5
- Light sensor
- Triaxial accelerometer
- Sound Sensor
- LM35 temp sensor
- Smoke sensor
- Temp and humidity sensor
- Water level sensor
- Soil moisture sensor
- XY joystick module
- Ultrasonic sensors
- Mini Breadboard
- Acrylic plate
|
|
This kit includes an LCD readout for visualising data from a variety of included analog sensors. It is supplied with an Arduino UNO compatible board, USB cable, sensor connection leads and 10 breakout boards. The boards included ultrasonic distance detector, moisture sensor, water sensor, joystick, mic and accelerometer. |
|
K5530 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
(SC Jun-July 2014) Record CD quality sound directly to an SD card with this touchscreen recorder. It offers hours of recording and playback time from an internal rechargeable Li-Ion AA battery and may be recharged via USB. A stereo line input and mono mic input are provided via 3.5mm jacks, plus an internal microphone for instant handheld r |
|
Q2120 |
|
- A must have for vehicle servicing
- Suits lead acid batteries of all types including SLA and deep cycle
- Includes rubber holster
- No battery required
- Quick and accurate measurement of battery health.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. Suitable for use with cars, trucks, busses, boat, forklifts and motorcycles - anywhere a 12 Volt lead acid battery is used. Includes heavy duty wide entry croc clip cables. Very easy to use, simply connect to the battery, turn tester |
|
P6893A |
|
|
|
For use with minimal wall clearance, such as behind cabinetry. |
|
L1044 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Dual 12V DC Merit sockets with protective dust cap. Ideal for use in 4WDs,
Caravans and RV. 6.3mm spade connection. |
|
A1142 |
|
- Video resolution - Up to 1080p
- HDMI and component video outputs
- Stereo analogue audio output via RCA
- MPEG-2, H.264/AVC SD/HD stream decoding
- 10/100M Base-T RJ45
- Audio MDI/MDIX IGMP multicasting programs
- Support USB 2.0 FAT32
- Easy to install and use
- Light weight & compact
- Includes remote control
|
|
Works in conjunction with the A 1140 for televisions without DLNA streaming capability (typically non-smart TVs). It receives HD content via IP and outputs to your TV via HDMI and component video connections. Compact design allows installation in any environment. Includes power supply. |
|
K1132 |
|
|
|
This educational kit uses common household items like soft drink cans and DVDs to create fun and interesting solar powered designs. The kit can be built (and rebuilt) up to 6 different ways. |
|
X0575 |
|
- 5/1 watt RF power Heavy duty
- Die cast metal chassis
- Fast charger POD supplied with 240v and 12v adaptors
- 3 Programmable instant channel buttons
- 80 Narrowband channels*
- 38 CTCSS & 104 DCS Privacy codes
- Duplex
- Rugged construction
- Channel scan (instant/memory/priority)
- Backlit LCD display
- Rotary volume control
- Signal monitoring
- Keypad lock
- Calling tone
- Power save mode
- Removable flexible antenna
- 2.5mm jack for optional headset or speaker mic
|
|
This quality unit has all the features you would expect to find in a modern UHF transceiver all housed in a rocksolid diecast chassis.
Includes charging pod, mains adaptor and high capacity 1800mAH lithium battery. |
|
H8220A |
|
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 13-27" weighing up to 8kg. |
|
Q1133A |
|
- Manual override of auto-ranging
- Range hold & data hold
- Auto power off
- Temperature measurement sensor included)
- Continuity buzzer
- Diode tester
- Frequency 1Hz - 30MHz
- Battery included
- CMOS and TTL logic testing
- Cat II 1000V
|
|
Featuring large, easy to read 20mm digits, this quality mini auto ranging digital multimeter is ideal for mobile technicians, installers or enthusiasts who want excellent performance and functions at an affordable price. |
|
P5958 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA, 3.5mm audio, three RCA connections & USB Type B. Supplied with two facia covers to suit your decor. |
|
A2696 |
|
- DAB+ band III digital tuner and analog FM tuner
- UPnP compatible - play music from PC’s on your network
- Internet radio station streaming
- USB playback
- MP3, AAC+, WMA-9 playback
- Wired or wireless 802.11b/g
- Includes remote control
|
|
Access over 14,000 internet radio stations & podcasts from around the world, sorted by country and genre. This standalone device requires only an internet connection (no computer required). |
|
A2308 |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Fully self contained stereo volume controls on a single gang switch plate. 11 settings plus off. A compact and easy to install solution for expanding your home audio system. Great for patio's, games rooms and entertainment areas. Anywhere extra pa |
|
A2309 |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Fully self contained stereo volume controls on a single gang switch plate. 11 settings plus off. A compact and easy to install solution for expanding your home audio system. Great for patio's, games rooms and entertainment areas. Anywhere extra pa |
|
A2387 |
|
- Manual impedance matching adjustment for high acoustic quality
- 4Ω or 8Ω speaker compatible.
- Speaker power: 100W/channel (RMS).
- Removable connector can handle 12-22 AWG capacity speaker cable.
- Recessed areas on front panel for labeling the room/zones. (labels not included)
- 19" rack mounting option.
- Requires no power to operate.
|
|
Designed for multi-room sound systems. Provides six independent stereo volume controls with individual zone on/off switches. Controls enable 11 volume settings plus off position. In addition, each zone can be switched on or off from the front panel. All s |