|
Description |
Downloads |
Specs |
Ordering |
|
 |
T3061A
|
|
- Quick penetration
- Powerful
- Non-ozone depleting
- Safe on most plastics
- Fantastic for use on noisy potentiometers
|
|
Quickly penetrates and flushes away light oils, greases and carbon deposits from electrical and electronic equipment. |
 |
D2320 |
|
|
|
A stylish bedside or desktop device with in-built 10W wireless charging for your phone & 8 colour night light. |
 |
Z6387 |
|
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Supports OV2640 and OV7670 cameras with built-in flash
- Supports for images WiFI upload
- Supports TF card
- Supports multiple sleep modes
- Embedded Lwip and FreeRTOS
- Supports STA/AP/STA+AP working mode
- Supports Smart Config/AirKiss One-click distribution network
- Supports for serial local upgrade and remote firmware upgrade (FOTA)
- Supports secondary development
|
|
A WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system. |
 |
P8174 |
|
- 5 x 10A individual power sockets and switches with covers
- Portable and worksite ready
- 2 x USB ports (2.1A total)
- IP54 Rating
- 1 x RCBO switch
- Flexible HD 1.8M Ext. Lead
- Max load: 2400W/10A
|
|
This Ultracharge RCD Protected 10A Powerblock is a must have for trades in the field or at home in the workshop - protects users from appliance faults just like your home RCD switch. |
 |
T4015A |
|
|
|
This magnetic project heat insulated work mat will make an ideal addition to any workbench. As its made out of silicone it has high temperature resistance. |
 |
D2375 |
|
- 5 Gb/s data rate
- Compatible with USB 3.0 devices
- Ultra-slim, zero-bend radius cable
- Requires no external power supply to extend USB device reach
- Hot swappable
|
|
This USB 3.0 Optical Lead features an ultra-thin profile and long reach, the USB 3.0 AOC breaks the distance barrier. |
|
D2374 |
|
- 5 Gb/s data rate
- Compatible with USB 3.0 devices
- Ultra-slim, zero-bend radius cable
- Requires no external power supply to extend USB device reach
- Hot swappable
|
|
This USB 3.0 Optical Lead features an ultra-thin profile and long reach, the USB 3.0 AOC breaks the distance barrier. |
 |
S9128B |
|
- 1/2.8"SONY Starvis Back-illuminated CMOS sensor
- AHD/CVI/TVI/CVBS 4 IN 1
- 2.7-13.5mm motorised Lens
- IR Distance max 30m
- IP66 outdoor, OSD & UTC support
|
|
This Vandal Resistant Vari-Focal IP66 Colour Dome Camera has been specifically designed for installation in applications where damage resistance is paramount eg bus or train stations, concourses, carparks etc. |
 |
H8965 |
|
- High-quality, two-part ABS construction
- Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
|
|
A compact, snap together black and grey case to suit the Raspberry Pi 4 Model B development board. Designed with all connection recesses and venting. |
 |
K8606 |
|
- 300x300x400mm build volume
- Dual port hot end cooling fans
- Meanwell 350W power supply
- All-metal frame
- Ultra Quiet TMC2208 Motherboard
- Resume printing function
- Filament breakage sensor
- Firm triangular structure
- High standard V-shaped profile
- All-metal hot end
- Easy assembly
- UI navigation screen
- SD card slot
|
|
With the Creality CR-10 V2 Desktop 3D Printer you can add 3D printing to your workbench to produce working prototypes. |
|
D2372 |
|
- 5 Gb/s data rate
- Compatible with USB 3.0 devices
- Ultra-slim, zero-bend radius cable
- Requires no external power supply to extend USB device reach
- Hot swappable
|
|
This USB 3.0 Optical Lead features an ultra-thin profile and long reach, the USB 3.0 AOC breaks the distance barrier. |
 |
A3082 |
|
- RS-232 port for remote control.
- Video formats up to 4Kx2K@60Hz.
- Compliant with HDMI 2.0a, DVI 1.0.
- Digital and analog extracted audio output.
- HDCP 2.2 and HDCP 1.4 compliant.
- Support PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH.
- Switches 4 HDMI sources to a single HDMI output.
|
|
This compact 4-way HDMI switcher features manual & infra-red remote control for switching up to 4 sources to a single display supporting resolutions up to 4k 60Hz. |
 |
H5407 |
|
|
|
The much simpler solution compared to cage nuts. Unlike cage nuts, Rackstuds go in from the front which greatly simplifies their installation. Cage nuts can be quite tricky to get in, especially when the rack starts to get populated or the rack is in situ with the side panels installed. |
 |
H5404 |
|
|
|
The much simpler solution compared to cage nuts. Unlike cage nuts, Rackstuds go in from the front which greatly simplifies their installation. Cage nuts can be quite tricky to get in, especially when the rack starts to get populated or the rack is in situ with the side panels installed. |
 |
T2748A |
|
|
|
Ideal for cutting solid core wires or even small diameter steel wire. |
 |
P7433 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
H8964 |
|
- High-quality, two-part ABS construction
- Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
|
|
A compact, snap together red and white case to suit the Raspberry Pi 4 Model B development board. Designed with all connection recesses and venting. |
|
P7436 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® 2.0 and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve.
|
 |
H8958 |
|
- Great for better heat dissipation on the Pi 4.
- Access to all Pi Ports: Power, Video Audio, USB, LAN, MicroSD Card.
- Slots for camera cables and GPIO access.
- Compatible with the Raspberry Pi 4 Model B.
- Includes cooling fan with header connection.
- Protective fan grill.
|
|
This compact multi-layer acrylic case suits the Raspberry Pi Model B 4 and provides access to all ports on the board. To keep your Pi cool, a 5V fan with header connection is provided, plus grill cover. |
 |
Q1340A |
|
- Transmitter
- Tone frequency: 130KHz
- Max. distance of transmission: 3km
- Max. distance of cable map: 300m
- Max. working current: ≦70mA
- Tone mode: Single tone
- Compatible connectors: For RJ45(8 pin)/RJ11(6 pin) cable map test. RJ45 SCAN socket : for RJ45 locating individual wire pairs RJ11 SCAN socket: for RJ11 locating individual wire pairs
- Cable types: RJ45 Lan cable Cat 5, 5e, 6(UTP/ STP), RJ11/12 telephone cable Cat 3 (6P/2C/4C/6C)
- Function selection: 5 Press button switch (POWER、SCAN/PoE. SCAN,TEST/FAST TEST、Ω,POL/TEL)
- Continuity test: 1 LED (≦300Ω), Coaxial cable & normal solid/Stranded wire by alligator clips patch cord.
- Max. signal voltage: 8Vp-p
- Cable map indication: 8 LEDs, Fast/Slow dual speed
- Shielded indication: 1 LED
- Telephone line polarity, status indication: 1 Dual color LED
- Live telecommunication equipment test and router test: Yes
- Voltage protection: DC 48V
- Auto power off: 1 hour
- Low battery display: 6.5V (Power LED flashes)
- Battery type DC 9.0V (NEDA 1604/ 6F22 DC9V ×1pce)
- Dimension: 138L×80W×35D mm
- Weight: 140g
- Receiver
- Frequency: 130KHz
- The Max. working current: ≦115mA
- Compatible connectors: RJ45(8 pin)/RJ11(6 pin)
- Function selection: 4 Position mode switch (LED, NCV, OFF, SCAN)
- Earphone jack: 1
- Signal status indication: 1 dual colour LED & Buzzer
- Cable map indication: 8 LEDs
- Shielded indication: 1 LED
- NCV indication; 1 LED (AC90~1000V，≥50mm，≤100mm)
- LED illumination: 1 LED
- Power indication: 1 LED
- Battery type: DC 9.0V (NEDA 1604/ 6F22 DC9V ×1pcs)
- Dimension: 203L×50W×32D mm
- Weight: 95g
- Accessories: RJ45 cable patch cords, RJ11 cable patch cords, RJ11 to alligator clips patch cord,
- earphone, storage bag, user manual
|
|
This Noise-Filtering Network PoE Toner & Probe
allows users to quickly locate and verify the cable status and troubleshoot wiring for continuity, shorts, opens and crossover on RJ45, Lan cable Cat5, 5e, 6 (UTP/STP), RJ11/12 telephone cable Cat. 3 (2/4/6 pin) & normal solid/stranded wire by alligator clips patch cord. |
|
P7439 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® 2.0 and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
P7446 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Long term bending radius ≈20mm
- Includes plug protector for cable pulling through conduits/cavities.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
AOC (active optical cable) and HDMI technology supporting 4K @ 60Hz resolutions at lengths up to 100m. |
|
P7449 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Long term bending radius ≈20mm
- Includes plug protector for cable pulling through conduits/cavities.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
AOC (active optical cable) and HDMI technology supporting 4K @ 60Hz resolutions at lengths up to 100m. |
|
P7434 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
S9365 |
|
- H.264+/265+ compression
- 1080p HDMI monitor output
- Recording up to 5MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 4 x 15.4W PoE network interfaces
- Internal SATA interface, max 8TB
- Remote control & mouse
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.4 support
|
|
This multi channel network video recorder offers 5MP resolution recording at 25fps per camera. It utilises H.264/H.265+ compression to maximise your hard disk space and has wide camera compatibility with ONVIF 2.4 support. |
 |
P0686A |
|
|
|
20m SpeakOn connector to SpeakOn connector audio lead. Genuine SpeakOn connectors. Made with 2 core flexible cable connecting 1+ & 1- of the connector. |
 |
P0685A |
|
|
|
10m SpeakOn connector to SpeakOn connector audio lead. Genuine SpeakOn connectors. Made with 2 core flexible cable connecting 1+ & 1- of the connector. |
 |
A1116 |
|
|
|
This 2x25W RMS amplifier module with Bluetooth receiver sticks to your speaker magnet and connects to a pair of in-ceiling/in-wall speakers. Easy to install and works with Bluetooth enabled devices such as smartphones, tablets and laptops. Includes 15V power supply. |
 |
S9396 |
|
- Monitor doorbell cameras or CCTV cameras
- Door call transfer to other monitors
- Call between monitors
- Monitor listening function
- Auto leave message function
- All weather IP66 diecast zinc alloy outdoor doorbell camera units
- Micro SD card slot
|
|
An ultra modern doorbell camera. |
 |
T3190 |
|
|
|
Cable Lubricant is used to assist in the laying and pulling of cable into conduits under floors, under ground and more. |
 |
P7502B |
|
|
|
Filtered VGA DE15 High Density Male-Male Lead, 2m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
 |
P0693 |
|
|
|
Measures 5-15V DC. Designed to fit P�-81, but can also be used standalone. 29mm mounting hole. 14mm thread length. |
 |
X3300 |
|
- Input voltage: 12V DC
- Current per m: ≈750mA
- LEDs: 120pcs of SMD 2835 per metre.
- Weatherproof rating: IP65
- Lumens: 350-400 per metre.
- Colour Rating: 397nm
|
|
Use it in long lengths for stunning coloured lighting effects or cut and shape into your own custom 'neon' signs. |
 |
M8199A
|
|
- 14Ah internal lithium-ion battery
- 100W modified sine wave 240V AC inverter
- 6A 4 x USB output (Type A, C & QC3.0)
- 3 x 2.1mm DC jack output (180W max)
- MPPT solar charger in-built
- Recharge by solar panel, mains or car charger
- In-built LED torch
- In-built reading LED light panel
- Colour LCD screen with capacity readout
- Ultra quiet operation
|
|
A complete mobile AC/DC power solution designed to be recharged via solar panels with in-built MPPT charging circuit. |
 |
D2327 |
|
- QI Standard.
- Includes USB type A to type C cable
- Inbuilt over-voltage, under-voltage and short circuit protection
|
|
Say goodbye to charging cables! Got two phones with wireless charging. This handy USB charging pad will charge both devices at once. |
 |
C9021A |
|
- Active Noise Cancelling technology
- Bluetooth 4.0 compatibility
- Volume, track selection, and power button located on earmuffs
- Up to 18 hours of talking and playback time
- Up to 120 hours of standby time
- Super large soft earmuffs
- Beautiful steel headband design
- Light weight but very robust
- Separate ANC on/off control
- Soft drawstring carry bag
- ANC on: Around 12 hours of continuous Bluetooth
- ANC off: Around 18 hours of continuous Bluetooth
|
|
Say goodbye to pesky outside interference with these super quiet noise cancelling headphones. Features 12 hours of listening time with bluetooth wireless listening. |
 |
T2457 |
|
- Easy to start, reliable piezo ignition
- Torch stays lit after initial ignition
- Gas feed flame adjustment
- Refillable gas chamber (can be detached from head)
- All metal gas chamber and feed system
- Wind proof jet flame
- Safety ignition lock to prevent accidental lighting
- Refills with standard butane gas
|
|
This handy blow torch kit features three individual nozzles for different types of jobs. Ideal for trades requiring both precision brazing and high output wide spread flames. Iroda model: CT-610 |
 |
P8110 |
|
|
|
Perfect way to wrap cables, spare wire and extension leads your workspace or in the field. Tough high impact ABS construction with wall mounting holes. 2-20m cable length. Size: 350H x 180W x 63Dmm. |
 |
Q0102 |
|
- 2 channel digital oscilloscope + digital multimeter
- Easy to use button and screen layout
- Small enough for single hand operation
- Large, clear 2.8” 64K colour screen 320x240 resolution
- Oscilloscope: 250MSa/s Sample Rate, 40MHz Bandwidth
- USB C recharging with internal 2600mAh lithium battery
- Automatic frequency & amplitude measurement
- 4000 count 10A multimeter
|
|
The ultimate field testing accessory combining an digital storage oscilloscope and digital multimeter. Fits right in the palm of your hand and is suitable for single handed operation when testing in tricky locations |
 |
A3833 |
|
- Allows 4 AV sources to be connected - analog AV, VGA+3.5mm audio, mini DisplayPort, HDMI and USB-C.
- Converts all inputs to HDMI output 4K/2K @ 60Hz.
- Charge device via USB type A or USB type C ports.
- Ethernet by-pass function
- Source auto-detect plus manual switch selection
- Includes power supply.
|
|
Ideal for use in educational or boardroom environments, this handy converter table box provides connection for AV devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
 |
A3832 |
|
|
|
Ideal for use in educational or boardroom environments, this handy converter box provides connection for devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
 |
T3084A
|
|
|
|
An ozone-safe, non-corrosive, non-flammable freezing spray. Useful for rapid detection of temperature dependent circuit faults, testing thermal sensors, or locating dry joints on PCBs. Non-flammable type. 300g. |
 |
K9670A |
|
- Utilises a half rack 1RU size case
- 16x2 alphanumeric display
- Rotary encoder control
- 4 push buttons
- Compatible with Arduino UNO/mega boards
- 5 2A 5V relay outputs
- 8 opto isolated inputs
- On board reset and LEDs
- All main board pins broken out to header sockets
|
|
Developed in house by Altronics, this new revised MegaBox is an upgrade of our original K 9670 - adding space for two shields, plus FIVE 2A 5V relay outputs and eight opto isolated outputs. All UNO/Mega pins are broken out to header sockets for easy connection to other breakouts. |
 |
A1103B |
|
- Low latency ensures video signal matches audio signal
- Perfect for transmitting TV audio to headphones/active speakers etc.
- Bluetooth 4.2+EDR
- Transmit to two Bluetooth devices at once
- Inbuilt lithium battery for portable use
- Includes USB charging / power lead, 3.5mm cable & Dual RCA to 3.5mm cable
- Playing time up to 8 hours
- Supports A2DP & AVRCP
protocols.
|
|
Bluetooth Audio Transmitter and Receiver. Send TV audio to your headphones! Transmits or receives audio via Bluetooth 4.1. Can be powered via USB on your TV (cable included). Uses low latency technology so theres no lip sync issues! Includes 3.5mm & RCA cables. |
|
P7432 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7430 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7429 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7428 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7427 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
S2682 |
|
- Emergency override feature
- LED status indicator
- Suitable for 12VDC Marine, 4WD, caravan and solar applications
|
|
This dual battery isolator kit allows you to charge two batteries at the same time from your engine alternator. The isolator kit will begin charging the second battery simultaneously when the start battery is sufficiently charged whilst engine is on.
|
THIS PRODUCT CONTAINS A BUTTON BATTERY.
