|
Description |
Downloads |
Specs |
Ordering |
|
|
Z6382 |
|
|
|
Great for security or web cam projects.
Detects movement from humans or animals. Range 0-7m.
Detector angle 110°. 5V input. 32x24mm. |
|
Z6385A |
|
- Microcontroller: ESP-WROOM-32 module
- USB to Serial Port Chip: CP2102-GMR
- Operating Voltage: DC 5V
- Operating Current: 80mA (average)
- Current Supply: 500mA (Minimum)
- Operating Temperature Range: -40℃ ~ +85℃
- WiFi mode: Station/SoftAP/SoftAP+Station/P2P
- WiFi protocol: 802.11 b/g/n/e/i (802.11n, speed up to 150 Mbps
- WiFi frequency range: 2.4 GHz ~ 2.5 GHz
- Bluetooth protocol: conform to Bluetooth v4.2 BR/EDR and BLE standards
- Dimensions: 55mm*26mm*13mm
- Weight: 9.3g
|
|
This board features a powerful ESP32 dual core microcontroller that has wifi and bluetooth. This allows it to have the ability to be programmed with the Arduino IDE. |
|
Z6387 |
|
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Supports OV2640 and OV7670 cameras with built-in flash
- Supports for images WiFI upload
- Supports TF card
- Supports multiple sleep modes
- Embedded Lwip and FreeRTOS
- Supports STA/AP/STA+AP working mode
- Supports Smart Config/AirKiss One-click distribution network
- Supports for serial local upgrade and remote firmware upgrade (FOTA)
- Supports secondary development
|
|
A WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system. |
|
Z6392 |
|
- Weight: 9 g
- Dimension: 22.2 x 11.8 x 31 mm approx.
- Stall Torque: 1.8 kgf·cm
- Operating Speed: 0.1 s/60 degree
- Operating Voltage: 4.8 V (~5V)
- Dead Band Width: 10 μs
- Temperature Range: 0ºC – 55ºC
|
|
This tiny and lightweight servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard servo. You can use any servo code, hardware or library to control these servos. |
|
Z6394 |
|
|
|
Add fingerprint authentication to your access control project. This device can store up to 20 individual prints via 360° recognition. |
|
Z6398 |
|
|
|
A mini breakout board for generating sound from your Arduino. 5V input. |
|
Z6415 |
|
- Quad-core 64 bit processor
- 4GB LPDDR4-3200 DRAM
- Wireless networking 802.11b/g/n/ac
- 2x USB 3.0 and 1x USB 2.0 ports
- Bluetooth 5.0
- Dual display output
- 4K video playback
- Ideal for surfing the web, creating and editing documents and learning to program with Raspberry Pi OS Desktop.
- Full 40 pin GPIO header on rear.
- Micro SD card slot
|
|
The Raspberry Pi 400 is a complete computer built into a keyboard case. It’s neat, portable design makes it ideal for education environments. With all the same features as the Raspberry Pi 4, it’s a powerful computing platform for work, education and play! Rear panel provides access to all ports including the GPIO header. This is a standalone versi |
|
Z6426 |
|
- Supports standard frame, extended frame of transmission and reception; support two receiving methods: Polling and interrupt
- Provide various interfaces, such as U-Art, I2C, DB9 connector, etc.
- Support SD card data storage
- Support power supply via Arduino motherboard or DB9 connector
|
|
The onboard BUS control chip can realize the data control on the CAN bus and data communication between devices. |
|
Z6427 |
|
|
|
A handy Wi-Fi activated relay module for Arduino and other development applications. |
|
Z6451 |
|
- Assembly manual included, plus YouTube tutorials available
- Includes all motors, Arduino board, components, wiring, chassis and tracks
- Bluetooth controllable from a smartphone
- Fully customisable
- Requires 2 x 14500 batteries
|
|
This smart car kit uses the power of Arduino to provide a customisable line tracking and obstacle avoidance robot which can be modified, tweaked and upgraded. It features 4 wheels with acrylic
base. The IR and line tracking sensors keep the robot from bumping
into anything, whilst on board bluetooth allows control from your
smartphone. |
|
Z6467 |
|
- In-built W5500 ethernet controller for instant IoT connection for your Arduino design
- Uses standard libraries
- On-board MicroSD card slot
- atmega328p UNO compatible microcontroller
- Standard pin outs and fully shield compatible
- Works with standard Arduino libraries and an updated IDE.
|
|
This W5500 ethernet development board is based on the microcontroller of Arduino Ethernet. The board features integrated USB download, TF card slot and more functions on it. Its also fully compatible with UNO pins. |
|
Z6513 |
|
- 5’’ standard display, 800 × 480 resolution
- With resistive touch screen, support touch control
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input, compatible with and can be directly connected to Raspberry Pi (3rd, 2nd, and 1st generation)
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution need to be able to force output for 800 x 480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT (resistive touch)
- Work as a PC monitor, support XP,win7, win8, win10 system(do not support touch)
|
|
A 800 x 480 touchscreen for Raspberry Pi that supports standard HDMI interface input, compatible with and can be directly connected to Raspberry Pi (3rd, 2nd, and 1st generation). |
|
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
|
Z6560 |
|
- 11 levels of speaking speed
- Supports Chinese and english languages
- Both male and female voice supported
- Use the Serial ports of your Arduinos only
|
|
This Speech Synthesis Shield is designed to be easily stacked upon any standard arduinos. It uses a XFS5051CE speech synthesis chip from IFLYTEK which combines world leading technology and high degree of integration. |
|
ZR6302G |
|
- On board on/off power button
- Integrated fan control forthermal management
- Dual-display support
- Two micro-HDMI ports
- Supports display resolutions up to 4K @ 60hz (1 x 2K up to 1440P@60, 1 x 4K 2.0 up to 4k@60)
- Multiple connectivity capabilities so less add on hardware required, including Bluetooth 5.0 with BLE, Gigabit Ethernet & Wireless LAN
- A 40P GPIO expansion header provides extensive compatibility with a wide range of accessories
- Get more multiple memory options, including 4GB RAM and a speed eMMC socket
- Compatible with most R-Pi 4 accessories, including cases, cameras and HAT modules
|
|
The ROCK 4C+ is a reliable, multifunctional and high-performing single-board computer based on a robust Rockchip RK3399T SoC, Dual Cortex® A72 CPU and Arm Mali™ T860MP4 GPU. |