|
Description |
Downloads |
Specs |
Ordering |
|
 |
AE1101 |
|
- Easy to Operate
- Wireless control
- Portable Design
- Supports iPhone, Android phone, other smart phones which with Bluetooth A2DP function
- Compatible with home stereos / speaker, car stereos, headphones that is with 3.5mm audio input
|
|
Add bluetooth wireless audio streaming to headphones, speakers or even vehicles. |
 |
A3217D |
|
- Transmits up to 70m without signal loss
- One-way IR signal transmission
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Compact design for discrete and flexible installation
- Supports cascading via additional HDMI loop out
- Supports video resolution up to 4k2k@30Hz YUV 4:4:4
- Supports copying EDID from receiver display or loop out display
- Supports Power over Cable (from transmitter to receiver)
|
|
This extender can send HD video/audio signal and IR control up to 70m@1080p, and 40m@4K30 resolution via a single CAT5e/6 cable with zero-delay and uncompressed transmission. The HDMI loop output can be cascaded to the next extender, supporting resolution up to 4K@30Hz. |
 |
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3245 NEW
|
|
- Extend both HDMI signal plus USB peripherals.
- Transmission up to 70m over Cat6/6a UTP cabling.
- Ideal for remote operation of PC equipment.
- HDMI 2.0b, HDCP 2.2 compliant.
- 18Gbps video bandwidth.
- EDID management.
- Includes transmitter & receiver.
- Supports USB 1.1 KVM pass-through.
|
|
This product is designed to extend HDMI signals over distances up to 70m using Cat6/6a cabling. In addition it also allows USB peripherals to control a connected computer from the receiver end. |
 |
A3139A |
|
- HDCP 1.4 complaint
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
 |
A3138A |
|
- HDCP 1.4 compliant
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
 |
A3207 |
|
|
|
Supplied as a pair, these handy bi-directional audio extender allow you to send stereo audio signals over long distances using economical UTP cable (Cat5/5e/6). Ideal for connecting an audio source to an amplifier in another room. Maximum distance 75m. |
 |
A3141 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3218C |
|
- Compact design for easy and flexible installation
- HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant.
- Supports 18Gbps video bandwidth.
- Single Cat5e/6 cable transmission: 120m @ 4K2K, 150m @ 1080p.
- HDMI loop output on transmitter
- Analogue 3.5mm stereo output on receiver
- Bi-directional IR control (two targets and two emitters included)
- RS232 pass-through
- CEC pass-through
- HDR, HDR10+, Dolby Vision and HLG support
- Supports PoC (Power over Cable)
|
|
This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between transmitter and receiver via a single CAT cable. |
 |
A3605 NEW
|
|
- Supports 4K @ 60Hz.
- As low as 100ms latency.
- Supports 20-60KHz IR remote extension.
- Supports USB KVM function.
- Up to 150m transmission line of sight.
- Auto channel selection.
- Equipped with 802.11ac 2T2R WiFi MIMO module.
- High-security protection.
- Supports one transmitter to multiple receivers.
- Supports HDCP2.2
|
|
This 4K wireless HDMI extender system supports 4K 60Hz resolutions with super smooth playback and low latency. You can now watch TV in your bedroom, study or any other room without messy cables. |
 |
A3215A |
|
- 70m Range
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz (75m)
- Supports 4K x 2K @ 60Hz 24bit (50m CAT5e) (60m CAT6)
- Supports 3D passthrough
- Supports LPCM, DTS digital, Dolby Digital, DTS-HD, Dolby True HD
- Supports 3D
- Supports HDbaseT technology
- Bi-direction IR control (wide band, 20-60KHz)
- Bi-direction delivery of power over cable
- Supports EDID call back
- Supports CEC pass through
- Built-in ESD protection system
|
|
Utilises the latest HDBaseT technology to send full HD uncompressed HDMI signals over Cat 5e/6 cable. |
 |
A0920 |
|
- IR Details
- Range: 100-300m
- IR Frequency: 20-60kHz
- RF Details
- RF Frequency: 915.1MHz
- Tx Power: 2mW
- Rx Current: 3.8mA
- Rx Sensitivity: -90dBm
|
|
This handy device converts the signal from your remote controls to an RF signal. |
 |
A3224 |
|
|
|
An ideal solution for pubs, clubs and venues, this HDMI extender system allows a single HDMI source to be shared across multiple screens located up to 30m away with Cat5e and 50m with Cat6. |
 |
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
 |
A3124 |
|
|
|
A compact, single box solution for extending HDMI lead lengths. Simply plugs in line and boosts signal allowing lead lengths up to 25m. Ideal for situations where home theatre equipment is located remotely from the screen or projector. HDCP 2.2/1.4 compliant.
|
 |
A3242 |
|
- Extends HDMI signals over distances up to 60m at 4k@ 60Hz 4:4:4 resolutions.
- HDMI 2.0, HDCP 2.2 HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- Supports one HDMI loop output
- Supports one-way IR pass-through
- Supports HDR function
|
|
Designed to extend HDMI signals over distances up to 60m across economical UTP cabling. |
 |
A3209 |
|
|
|
Supplied as a pair, these handy bi-directional extenders allow you to send stereo audio signals over long distances using economical UTP cable (Cat5/5e/6). Ideal for connecting an audio source to an amplifier in another room. Maximum distance 75m. |
 |
A1171A |
|
- 4 x Emitter output connections
- Power socket with LED indicator
- Large detachable IR target connection
- Compact surface mount package
|
|
Includes hub, one infra red target and two dual infra red emitters and power supply. |
 |
A3244B |
|
- HDBaseT single UTP
- Simultaneous HDMI, IR & RS-232 signal transmission
- HDCP compliant
- HDMI ARC and local audio extraction
- Transmitter or receiver unit can be powered via PoC
- Bi-directional IR transmission
- Supports 4K @ 60Hz 4:4:4 (70m max) when used with Cat6A/7
- Supports PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD.
|
|
This HDBaseT UTP balun allows transmission of 4K HDMI signals up to 70m with full audio-return-channel (ARC) support and RS-232 control signals. |
 |
A3214 |
|
- Send mono or stereo audio signals over distances up to 670m
- No power required
- Four channel mono or two channel stereo
- Compact design with simple point to point set up
- Great for distributed audio systems where audio sources are located remotely
- Can be used in commercial or domestic audio systems.
|
|
This compact box converts four RCA audio signals into a UTP RJ45 output for transmission over long distance (up to 670m). May be used for two stereo signals or four mono signals. Ideal for domestic and commercial audio systems requiring audio source. |
 |
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
 |
A0923 |
|
|
|
Plug in IR Receiver unit.
|
 |
A1168 |
|
- Foxtel compatible (channel & volume controls only)
- 4 x Emitter output connections
- Power socket with LED indicator
- Large detachable IR target connection
|
|
Includes hub, one infra red target and two dual infra red emitters and power supply. |
 |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
