|
Description |
Downloads |
Specs |
Ordering |
|
 |
S4540 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.2kg
- Capacity
- 20 Hour Rate (10.5V): 7.2Ah
- 10 Hour Rate (10.5V): 6.7Ah
- 1 Hour Rate (9.6V): 4.67Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: <25mΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.16A
- Maximum Discharging Current: 108A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 7.2Ah sealed lead acid (SLA) battery is perhaps the most common size SLA battery in use. |
 |
S4569 |
|
- General
- Dimensions: 350L x 167W x 179H mm (including tabs)
- Weight: 21kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 65Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 650A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 19.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 70Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4538 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28MΩ
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life, maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
S4539 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28m Ohm
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 7Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SG4571 |
|
- Physical Size
- Length: 258mm
- Width: 166mm
- Height (Total inc. tabs): 215mm
- Weight: 24.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current (5s): 900A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 24A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 80Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
S4571 |
|
- General
- Dimensions: 259L x 168W x 215L mm (including tabs)
- Weight: 24kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6.6mΩ
- Max. Discharge Current: 900A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 22.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 80Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
N2097 |
|
- Suitable for any 12VDC system up to 8A direct current loads like motors, lamps, heaters & LEDs (with current limiting resistors).
- Electric motor can start smoothly at low speed with this PWM controller.
- Replaces the resistor circuit for control of the speed of DC motors
- Frequently used as light dimmer.
- Energy efficient with zero to full speed control
- Light dimmer capable of smooth control
- The whole PCBA is potted in epoxy and with the special splash proof tuning potentiometer making this controller weather proof.
|
|
This 12VDC 8A pulse width modulator (PWM) is a general purpose DC output power control. |
 |
SL4541A
|
|
|
|
This 8Ah LiFEPO4 replacement battery is compatible in size with traditional 7Ah/9Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
S4574 |
|
- General
- Dimensions: 303L x 169W x 215H mm (including tabs)
- Weight: 27kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 90Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6mΩ
- Max. Discharge Current: 1080A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 90Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4542 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.6kg
- Capacity
- 20 Hour Rate (10.5V): 9Ah
- 10 Hour Rate (10.5V): 8.4Ah
- 1 Hour Rate (9.6V): 5.9Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.7A
- Maximum Discharging Current: 135A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 9Ah sealed lead acid (SLA) battery is one of the most common size SLA batteries in use. |
 |
S4543 |
|
- General
- 151L x 65W x 100H mm (including tabs)
- Weight: 2.65kg
- Charging
- 20 Hour Rate (10.5V): 9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 18MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.52A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S5021B ROHS
|
|
- Capacity (mAh): 18
- Chemistry: Alkaline
- Cross Reference:
- Dimensions (mm): 7.7X28.0
- Voltage: 12
|
|
As used in many car alarm key ring remote controls, remote garage door openers, cigarette lighters etc. Equivalent to GP27A, LR27A. |
 |
SB5021B |
|
- Capacity (mAh): 18
- Chemistry: Alkaline
- Cross Reference:
- Dimensions (mm): 7.7X28.0
- Voltage: 12V
|
|
As used in many car alarm key ring remote controls, remote garage door openers, cigarette lighters etc. Equivalent to GP27A, LR27A.
50 pack. |
 |
M9265A |
|
|
|
Compact 12V AC plugpack with 500mA current output.
MEPS approved. |
 |
M9267A |
|
|
|
Compact 12V AC plugpack with 1A current output.
MEPS approved. |
 |
N2099A |
|
- Receive notification alerts when Bluetooth in range
- Check vehicle cranking system automatically while engine starting
- Check charging system (alternator)
- List driving periods
- Alert smartphone if abnormalities occur.
- Short-circuit and reverse connection protection
- Data stored in battery monitor for up to 31 days
- Automatic synchronisation when in Bluetooth range
- Compatible with all 12V vehicle batteries
- Graphical historical data display
- Engine starting detection automatically
- Free BM2 app for both iOS and Android devices
|
|
This handy 12V bluetooth battery monitor allows you to get live performance stats on your phone. Provides live feedback on your vehicle or auxiliary battery, plus long term stats. Suits lead acid batteries. |
 |
M8942A |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- MEPS approved.
|
|
Super-compact regulated power supplies. Supplied with 2.1mm DC jack. 100-240V AC input. Energy authority approved. MEPS approved. Requires P 8417 IEC lead. Dimensions: 167 x 65 x 40mm.
|
 |
M8942B NEW
|
|
- Australian standards compliant
- Suitable for a range of electronic devices
- MEPS approved.
|
|
12V DC Switchmode Powerpack. Super-compact regulated power supplies. Supplied with fixed 2.1mm DC jack. 100-240V AC input via IEC C13 socket. Energy authority approved. MEPS approved. Dimensions: 147W x 59 x 37Dmm. |
 |
M8932B |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC Switchmode Plugpack Supplied with fixed positive to tip 2.1mm DC jack. Compact design with high current regulated output. Energy authority approved. MEPS approved.
12VDC @ 1A. |
 |
MB8932C |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC, 1 Amp Switchmode Plugpack Supplied with a fixed positive to tip 2.5mm DC jack (2.5ID x 5.5OD x 10L). Compact design with high current regulated output. Energy authority approved. MEPS approved. Dimensions: 60L x 40H x 35D mm. |
 |
M8936D |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC Switchmode Plugpack Supplied with fixed 2.1mm DC tip (tip positive). Compact design with high current regulated output. Energy authority approved. MEPS approved.
12VDC @ 2A. |
 |
MB8936C |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC, 2 Amp Switchmode Plugpack Supplied with a fixed positive to tip 2.5mm DC jack (2.5ID x 5.5OD x 10L). Compact design with high current regulated output. Energy authority approved. MEPS approved. Dimensions: 75L x 42W x 40D mm. |
 |
M8937D |
|
- Australian Standards Compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC Switchmode Plugpack Supplied with fixed 2.1mm DC positive tip. Compact design with high current regulated output. Energy authority approved. MEPS approved.
12VDC @ 3A.
|
 |
MA8123 |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC, 3 Amp Switchmode Plugpack Supplied with a fixed screw on positive to tip 2.1mm DC jack (2.5ID x 5.5OD x 10L). Compact design with high current regulated output. Energy authority approved. MEPS approved. |
 |
MB8937D |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC, 3 Amp Switchmode Plugpack Supplied with a fixed positive to tip 2.5mm DC jack (2.5ID x 5.5OD x 10L). Compact design with high current regulated output. Energy authority approved. MEPS approved. |
