|
Description |
Downloads |
Specs |
Ordering |
|
 |
M8721 |
|
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- LED indicator for power on
- 100% full load burn-in test
- All using 105ºC long life electrolytic capacitors
- Withstand 300VAC surge input for 5 second
- High operating temperature up to 70
- Withstand 5G vibration test
- High efficiency, long life and high reliability
|
|
The Mean Well RS-25-5 has a rated output of 25W at 5V DC. This range of switchmode power supplies offer high efficiency DC power in a compact enclosure. They are designed to be installed within a secondary cabinet as the 240V input terminals are exposed. |
 |
SB5021B |
|
- Capacity (mAh): 18
- Chemistry: Alkaline
- Cross Reference:
- Dimensions (mm): 7.7X28.0
- Voltage: 12V
|
|
As used in many car alarm key ring remote controls, remote garage door openers, cigarette lighters etc. Equivalent to GP27A, LR27A.
50 pack. |
 |
M8980C NEW
|
|
- Voltage Input: 100-240V AC 60/50Hz
- Voltage Output:
- 3V, 4.5V 5V @ 2A
- 6V, 7.5V @ 1.5A
- 9V @ 1.3A
- 12V DC @ 1A
- Efficiency Level: V
- Dimensions: 43W x 76H x 44D mm
|
|
A slim line multi-voltage plug pack with the adjustment switch on the side of the unit that faces the wall when installed. This prevents accidental change of output voltage which may cause damage to a connected appliance. 2A max output. |
 |
S4810A NEW
|
|
- Delivers Longer lasting power (vs. prior Procell Alkaline AAA batteries) in high drain professional devices, that may result in fewer battery replacements and may therefore lead to savings on operating costs that are associated with battery replacement
- Manufactured using superior cell design (vs. prior Procell Alkaline AAA batteries) to ensure high-quality cell construction. Each battery comes with a ‘quality warranty’. Design, safety, manufacturing, and qualification follow Procell’s stringent battery standards, which incorporate parts of the ANSI and IEC battery standards.
- Economically packaged in bulk and individually date-coded for effective inventory management.
- Used by manufacturers around the world: Procell Alkaline batteries have been designed in collaboration with manufacturers to work best in professional devices
- Operating temperatures from -20°C. to 54°C
|
|
AAA size, pack of 24. Procell Alkaline Intense AAA industrial batteries are specifically designed to last longer in high drain professional devices that require a high amount of power or peaks of power, such as blood Pressure monitors, soap dispensers or flashlights. |
 |
S4820A NEW
|
|
- Delivers Longer lasting power (vs. prior Procell Alkaline C batteries) in high drain professional devices, that may result in fewer battery replacements and may therefore lead to savings on operating costs that are associated with battery replacement.
- Manufactured using superior cell design (vs. prior Procell Alkaline C batteries) to ensure high-quality cell construction. Each battery comes with a ‘quality warranty’. Design, safety, manufacturing, and qualification follow Procell’s stringent battery standards, which incorporate parts of the ANSI and IEC battery standards.
- Economically packaged in bulk and individually date-coded for effective inventory management.
- Used by manufacturers around the world: Procell Alkaline batteries have been designed in collaboration with manufacturers to work best in professional devices.
- Operating in temperatures from -20°C to 54°C.
|
|
C size, pack of 12. Procell Alkaline Intense C industrial batteries are specifically designed to last longer in high drain professional devices that require a high amount of power or peaks of power, such as a soap dispenser. |
 |
M9325A |
|
|
|
16VAC @ 1.38A
Unit has bare ends (no tip fitted)
MEPS Approved.
Dimensions: 80L x 55W x 55D mm |
 |
MB8937D |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC, 3 Amp Switchmode Plugpack Supplied with a fixed positive to tip 2.5mm DC jack (2.5ID x 5.5OD x 10L). Compact design with high current regulated output. Energy authority approved. MEPS approved. |
 |
M8937D |
|
- Australian Standards Compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC Switchmode Plugpack Supplied with fixed 2.1mm DC positive tip. Compact design with high current regulated output. Energy authority approved. MEPS approved.
12VDC @ 3A.
|
 |
S4870B |
|
|
|
Nexcell heavy duty alkaline mercury free batteries offer economy and peak performance. Nexcell heavy duty alkaline batteries provide the best performance for your low-current household appliances like portable radios, or torches. |
 |
M9332A |
|
|
|
Compact 16V AC plugpack with 1.38A current output. Earthed connection.
Unit has bare ends (no tip fitted).
MEPS approved. |
 |
S4501 |
|
- General
- Dimensions: 151L x 50W x 100H mm (including tabs)
- Weight: 1.75kg
- Capacity
- 20 Hour Rate (5.25V): 12Ah
- 10 Hour Rate (5.25V): 11Ah
- 1 Hour Rate (4.8V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 12MΩ
- Float Charging Voltage: 6.8 - 6.9V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 7.25 - 7.5V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 6V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
S4538 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28MΩ
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life, maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
S4539 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28m Ohm
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 7Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
MA8241 |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC Switchmode Plugpack Supplied with fixed screw on positive 2.1mm DC tip. Compact design with high current regulated output. |
 |
M9393B |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC Switchmode Plugpack Supplied with reversible polarity 2.1mm DC tip. Compact design with high current regulated output. |
 |
M8945A |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
15V DC Switchmode Plugpack Supplied with fixed 2.1mm DC positive tip. Compact design with high current regulated output. Energy authority approved. MEPS approved.
15VDC @ 2.4A.
|
 |
M8731 |
|
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- LED indicator for power on
- 100% full load burn-in test
- All using 105ºC long life electrolytic capacitors
- Withstand 300VAC surge input for 5 second
- High operating temperature up to 70
- Withstand 5G vibration test
- High efficiency, long life and high reliability
|
|
The Mean Well RS-25-12 has a rated output of 25W at 12V DC. This range of switchmode power supplies offer high efficiency DC power in a compact enclosure. They are designed to be installed within a secondary cabinet as the 240V input terminals are exposed. |
 |
M8770 |
|
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- LED indicator for power on
- 100% full load burn-in test
- All using 105ºC long life electrolytic capacitors
- Withstand 300VAC surge input for 5 second
- High operating temperature up to 70
- Withstand 5G vibration test
- High efficiency, long life and high reliability
|
|
The Mean Well RS-25-24 has a rated output of 26W at 24V DC. This range of switchmode power supplies offer high efficiency DC power in a compact enclosure. They are designed to be installed within a secondary cabinet as the 240V input terminals are exposed. |
 |
M8950A |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
18V DC Switchmode Plugpack Supplied with fixed 2.1mm DC tip (tip positive). Compact design with high current regulated output. Energy authority approved. MEPS approved.
18VDC @ 1.33A. |
 |
M8720 |
|
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- LED indicator for power on
- 100% full load burn-in test
- All using 105ºC long life electrolytic capacitors
- Withstand 300VAC surge input for 5 second
- High operating temperature up to 70
- Withstand 5G vibration test
- High efficiency, long life and high reliability
|
|
The Mean Well RS-15-5 has a rated output of 15W at 5V DC. This range of switchmode power supplies offer high efficiency DC power in a compact enclosure. They are designed to be installed within a secondary cabinet as the 240V input terminals are exposed. |
 |
M9379A |
|
|
|
24VAC @ 900mA
Unit has bare ends (no tip fitted)
MEPS Approved. |
 |
S4746G |
|
|
|
Pack of 4 high quality NiMH 2600mAh rechargeable batteries. |
 |
S4530 |
|
- General
- Dimensions: 134L x 67W x 66H mm (including tabs)
- Weight: 1.35kg
- Charging
- 20 Hour Rate (10.5V): 3.5Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 32MΩ
- Max Discharge Current: 54A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 1.08A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 3.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4532 |
|
- General
- Dimensions: 90L x 70W x 107H mm (including tabs)
- Weight: 1.45kg
- Capacity
- 20 Hour Rate (10.5V): 4.5Ah
- 10 hour Rate (10.5V): 4.2Ah
- 1 Hour Rate (9.60V): 2.95Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 45MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 1.35A
- Maximum Discharging Current: 67.5A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 4.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4761
|
|
- Standard Capacity: 4500mAh. (0.5C, (current value of 4500mA at 1C)
- Capacity Range: 4450-4650mAh 0.5C
- Standard Voltage: 3.6V
- Alternating Internal Resistance: <30mΩ
- Charge Conditions: 4.2V cut off voltage, 0.01C cut off current.
- (constant current charge to 4.2V at 0.5C, constant voltage charge to stop until 0.01CmA)
- Max Charging Current: 4.5A
- Max Continuous Discharge Current: 13A
- Pulse Discharge Current: 15A, 5s
- Working Temperature: 0-55°C charging, -20°C-60°C discharging
|
|
These high performance 26650 lithium ion 3.6V batteries offer high performance and long life from a compact package. This model has in-built protection features to ensure safe operation at all times. These include over charge, over discharge, short circuit and over current protection. |
