|
Description |
Downloads |
Specs |
Ordering |
|
|
D0883 |
|
- Line interactive smart AVR
- Three Australian outlets
- Full time power surge / spike protection
- USB communications with sophisticated PowerShield NetGuard software
- Modern, stylish steel enclosure
- Ultra reliable
|
|
Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, |
|
D0918 |
|
|
|
The PowerShield Environmental Monitoring Device (PSEMD) is a PSSNMPV4 accessory suited for monitoring temperature and humidity. Email alerts and or system shutdown can be initiated if the user defined thresholds are exceeded. It offers two additional dry contact inputs for sensors such as smoke detectors and tamper switches. |
|
M8187 |
|
- Nominal Input Power @ 240V AC: 500W
- Nominal Input Current: 2.2A
- Circuit Breaker Current: 3.0A
- Output Voltage: 120V
- Output Current: 4.2A
- Output Power: 250VA
- Dimensions: 158W x 100D x 120H mm
- Weight: 6.0Kg
|
|
M8187 500W, Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket.
Secondary Rating: 120V 4.2A |
|
M8205 |
|
- 0 to 30V @ 0 to 5A output
- Regulated variable output voltage
- Auxiliary fixed outputs of 5V & 12V @ 0.5A
- Variable current limiting
- Digital LCD meters
- Overload & short circuit protected
- Floating outputs
- Extremely low ripple & noise
- Linear toroidal design
- Excellent regulation
|
|
Including both variable output voltage and current this bench power supply is an ideal addition to any work bench. Voltage is fully variable from 0 - 30V on the main terminals, plus auxiliary outputs of fixed 12V and 5V at 0.5A are also provided. |
|
D0942 |
|
- Surge and EMI/RFI filter protection
- 40kA Imax in L-N mode
- 60kA all modes
- 3 stage, 3 mode protection
- LC filter network
- Rugged IP24 enclosure
- 10A IEC C13/14 or 16A IEC C19/20
|
|
Provides secondary protection for critical equipment in locations prone to unreliable electrical supply, such as lightning prone regions. Ideally suited for use in conjunction with UPS systems or as secondary surge protection connected in line at the equipment location. Excess voltage transients are diverted to neutral and earth, limiting the damag |
|
SG4577 |
|
- Physical Size
- Length: 300mm
- Width: 171mm
- Height (Total inc. tabs): 215mm
- Weight: 31kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 110Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤5mΩ
- Max. Discharge Current (5s): 1000A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: IT (F8) /NB (F16)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 33A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
M8200A |
|
- 0 to 30V @ 0 to 3A output
- Regulated variable output voltage
- Auxiliary fixed outputs of 5V & 12V @ 0.5A
- Variable current limiting
- Digital LCD meters
- Overload & short circuit protected
- Floating outputs
- Extremely low ripple & noise
- Linear toroidal design
- Excellent regulation
|
|
With an output of up to 30 volts at 3 amps, this compact bench power supply has been one of our most popular. Both output voltage and current are fully adjustable. In the case of an output short, the power supply goes into overload and shuts down. In addi |
|
M8224 ROHS
|
|
- 3 to 15V @ 25A output
- Regulated variable output voltage or fixed 13.8V (selectable)
- Digital LED meters
- Overload & short circuit protected
- Extremely low ripple & noise
- Excellent regulation
- Highly efficient switchmode design
|
|
Boasting a massive 25A this power supply is ideal for testing 2 way radios, car stereos, high power RF transmitters, inverters and the like. The output voltage can either be fixed at 13.8V or fully variable from 3 - 15V via the front panel control. |
|
D0930 |
|
|
|
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! |
|
D0882A |
|
- Line interactive smart AVR
- Three Australian outlets
- Full time power surge / spike protection
- USB communications with sophisticated PowerShield NetGuard software
- Modern, stylish steel enclosure
- Ultra reliable
|
|
Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, |
|
S4576 |
|
- General
- Dimensions: 330L x 173W x 220H mm (including tabs)
- Weight: 30.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 100Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): <5.5mΩ
- Max. Discharge Current: 950A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 100Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4574 |
|
- General
- Dimensions: 303L x 169W x 215H mm (including tabs)
- Weight: 27kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 90Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6mΩ
- Max. Discharge Current: 1080A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 90Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
SG4571 |
|
- Physical Size
- Length: 258mm
- Width: 166mm
- Height (Total inc. tabs): 215mm
- Weight: 24.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current (5s): 900A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 24A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
D0924 |
|
- 0RU, 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Vertical PDU incorporates three-way mounting brackets for ease of installation
|
COMING SOONThis item is arriving soon. |
10 Outlet Vertical Power Rail (10A IEC C20) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (10A IEC C20) 0RU. Colour Black. |
|
N2089 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
|
D0874 |
|
- Automatic Voltage Regulation (Buck and Boost)
- Informative Screen Display
- USB Charging Port
- Light-weight compact and elegantly designed
- Intelligent microprocessor control
- Monitoring and shutdown software included
- Overload protection and alarm
- Output short circuit protection
- Start on battery function (cold start)
- USB communication
- Easy user-replaceable battery
- Australian/New Zealand approved sockets
- Wall mountable
|
|
The Powershield SafeGuard 1000VA Uninterruptible Power Supply (UPS) is designed for a home/office solution. |
|
D0923 |
|
- 0RU, 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Vertical PDU incorporates three-way mounting brackets for ease of installation
|
|
10 Outlet Vertical Power Rail (10A IEC C13) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (10A IEC C14) 0RU. Colour Black. |
|
S4571 |
|
- General
- Dimensions: 259L x 168W x 215L mm (including tabs)
- Weight: 24kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6.6mΩ
- Max. Discharge Current: 900A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 22.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 80Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
M8185 |
|
- Nominal Input Power @ 240V AC: 250W
- Nominal Input Current: 1.12A
- Circuit Breaker Current: 2.0A
- Output Voltage: 120V
- Output Current: 2.1A
- Output Power: 250VA
- Dimensions: 133W x 81D x 98H mm
- Weight: 3.2Kg
|
|
M8185 250W model. Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket.
Secondary rating: 120V 2.1A Max |
|
SL4557A
|
|
|
|
This 30Ah LiFEPO4 replacement battery is compatible in size with traditional 26Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
SG4567 |
|
- Physical Size
- Length: 229mm
- Width: 138mm
- Height (Total inc. tabs): 213mm
- Weight: 17.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 660A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
D0929 |
|
|
|
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! |
|
DC0891 |
|
|
|
The PSAS400 communication card provides contact closures for remote monitoring of your UPS. To meet different application requirements the PSAS400 card is capable of selecting the status of the dry-contact signal (active close or active open) by setting jumper. |
|
DB0891 |
|
|
|
The relay card (PSAS400) provides volt free contact (VFS) relays that change state upon UPS events. This type of card is often used when current loop communications are required for devices such as building management systems (BMS), access control alarm panels or industrial PLCs. User selectable normally open (default) or normally closed contacts. |
|
D0876
|
|
- Includes 4 x Li-Ion batteries
- Auto-start when plugged in
- Microprocessor control
- Multicolour LED indicator and manual Power Off Switch
- Overload, short circuit, over charge and over discharge protection
- Long backup time
- Additional terminal output for hardwired DC connection
- 2.1mm DC input jack
|
|
The Powershield DC - Mini 36 UPS is an ideal back up solution for routers, modems, security cameras, wifi extenders and VOIP phones. |
|
DH0924 |
|
- 1RU, 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Horizontal PDU incorporates recessed brackets for cable management
|
|
10 Outlet Horizontal Power Rail (8x 10A IEC C13 & 2x 16A IEC C19) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (16A IEC C20) 1RU. Colour Black. |
|
S4569 |
|
- General
- Dimensions: 350L x 167W x 179H mm (including tabs)
- Weight: 21kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 65Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 650A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 19.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 70Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
DH0923 |
|
- 1RU 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Horizontal PDU incorporates recessed brackets for cable management
|
|
10 Outlet Horizontal Power Rail (10A IEC C13) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (10A IEC C14) 1RU. |
|
M8195B
|
|
- Compact design with 20000mAh internal battery pack
- 2500A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs (5V/3A each)
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
|
S4567 |
|
- General
- Dimensions: 229L x 138W x 213H mm (including tabs)
- Weight: 16.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate. FV (1.75/Cell)
- Internal Resistance (1KHz): 7.5mΩ
- Max. Discharge Current: 660A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 60Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
N2087 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
|
D0928 |
|
|
|
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! |
|
D0873 |
|
- Automatic Voltage Regulation (Buck and Boost)
- Light-weight compact and elegantly designed
- Intelligent microprocessor control
- Monitoring and shutdown software included
- Fax/modem/LAN surge suppression port
- Overload protection and alarm
- Output short circuit protection
- Start on battery function (cold start)
- USB communication
- Easy user replaceable battery
- Australian/New Zealand approved sockets
- Wall mountable
- Fast charging – 90% in 4 hours
|
|
The Office model is perfect for a home/office solution. It includes three battery backup and surge protected Australian sockets, three dedicated Australian outlets with surge protection and RJ45 phone line surge protection. Provides modified sinew |
|
S4565 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 14.6kg
- Charging
- 20 Hour Rate (10.5V): 50Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 9MΩ
- Max Discharge Current: 540A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: NB(F4)/IT(F8)
- Container Material: ABS
- Max Charge Current: 15A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 50Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
M8254 |
|
- Up to 20A output
- Fixed 13.8V voltage
- High efficiency switchmode design
- Low noise and ripple <100mV
- 2% voltage regulation
- Short circuit protected output
- Fused input
|
|
A fixed voltage output power supply designed for powering automotive, marine and comms equipment. |
|
SL4551A
|
|
|
|
This 20Ah LiFEPO4 replacement battery is compatible in size with traditional 20Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
SG4563 |
|
- Physical Size
- Length: 197mm
- Width: 165mm
- Height (Total inc. tabs): 170mm
- Weight: 14.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current (5s): 480A (5s)
- Battery Life: 6-9 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
|
M8305 |
|
- Input voltage: a.c. 220-240V @ 50Hz
- Output voltage: 0 - 30V d.c.
- Output current max: 5A
- Supply regulation: CV≤1%+10mV
- Load regulation: CV≤1%+5mV
- Ripple: 200mVp-p
- Protection: Current limiting
- Voltmeter: LCD ±1% +2 digits
- Ammeter: LCD ±1% +2 digits
- Temperature: 0ºC-40ºC
- Humidity: Less than RH80%
- Operating time: 8hrs
- Dimensions: 85 x 160 x 205mm
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. |
|
M8882A |
|
- Rapid charging with BC1.2 technology, power output up to 2.4A
- Innovative design for space saving, put your devices on top of charging station when charging
- Adjustable separators allows you to adjust the width needed for different devices
- Protection against over-charging, over-voltage, over-heating and short circuit
- Solid and stable base, it can support up to 10 devices
- 2 charging ports with QC3.0
- QC3.0 is backward compatible with Quick Charge 2.0
|
|
This 10 port USB charger allows you to charge up to 10 mobile devices at once. Ideal for workplaces, schools and large families. Keep everything charged up and ready to go. |
|
D0881 |
|
- Stylish and informative LCD display
- Surge Protection, Best in it’s Class
- Excellent microprocessor control guarantees high reliability
- Australian outlet sockets for UPS and Surge protection
- Buck and boost AVR for voltage stabilization
- User replaceable batteries
- Silent operation (no fans included)
- Auto restart when AC returns
- Off-mode charging
- Cold start function
- USB communication with sophisticated NetGuard® software
- Free download software included
|
|
The Powershield Defender PSD 650VA Uninterruptible Power Supply (UPS) is designed to support multiple computers and peripherals, networked PC''s and point of sale systems. |
|
S4563 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 12.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 10mΩ
- Max. Discharge Current (5s): 380A
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand by:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 40Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
D0521 NEW
|
|
- High 100W output for high capacity devices such as laptops
- 30,000mAh capacity
- 111Wh capacity - NOT SUITABLE FOR AIR TRAVEL.
- USB type A and type C outputs on front panel
- Study aluminium casing.
- Torch with 3 modes on back panel
|
|
This 30,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
|
SG4560A NEW
|
|
- Physical Size
- Length: 195mm
- Width: 130mm
- Height (Total inc. tabs): 155mm
- Weight: 10.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 33Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 12mΩ
- Max. Discharge Current (5s): 330A (5s)
- Battery Life: 5-7 years standby
- Terminal Type: IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9.9A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
|
M8776 |
|
- Phase correction circuitry
- Screw terminals for inputs and outputs
- Wide operating input voltage 90 – 264VAC, 47 – 63Hz
- Excellent output regulation from no load to full load
- High efficiency
- Overload and short circuit protection
- Inbuilt EMI filter to reduce noise radiation
- EMC approved
|
|
Switchmode power supplies offer several significant advantages over traditional linear transformer power supplies.They are far more efficient than their linear counterparts. As they do not use power or mains transformers the equivalent power supply weighs |
|
D0934 |
|
- Very wide input voltage range
- Excellent output voltage stability
- Includes surge and spike suppression
- Extremely fast response
- Provides over-voltage & under-voltage protection
- Provides over-temperature and overload protection
- Stylish enclosure with Australian outlet sockets
|
|
The PowerShield VoltGuard AVR automatically maintains a constant voltage level to protect sensitive electronics from brownouts and over voltages.
|
|
S4561 |
|
- General
- Dimensions: 195L x 130W x 155H mm (including tabs)
- Weight: 10.7kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 35Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 525A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 10.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 35Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
D0906 |
|
|
|
High strength anodised steel sliding support rails for easy access installation of the 2RU centurion and commander series of powershield UPS models. |
|
M8303 |
|
- Input voltage: a.c. 220-240V @ 50Hz
- Output voltage: 0 - 30V d.c.
- Output current max: 3A
- Supply regulation: CV≤1%+10mV
- Load regulation: CV≤1%+5mV
- Ripple: 200mVp-p
- Protection: Current limiting
- Voltmeter: LCD ±1% +2 digits
- Ammeter: LCD ±1% +2 digits
- Temperature: 0ºC-40ºC
- Humidity: Less than RH80%
- Operating time: 8hrs
- Dimensions: 85 x 160 x 205mm
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. |
|
SG4560 |
|
- Physical Size
- Length: 195mm
- Width: 130mm
- Height (Total inc. tabs): 155mm
- Weight: 10.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 33Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 12mΩ
- Max. Discharge Current (5s): 330A (5s)
- Battery Life: 5-7 years standby
- Terminal Type: IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9.9A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |