|
Description |
Downloads |
Specs |
Ordering |
|
 |
M9273B |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
Supplied with fixed tip positive 2.1mm DC jack. MEPS approved. Energy authority approved. |
 |
M8939D |
|
- Input: 100-240V AC @ 50-60Hz
- Tip: 2.1mm x 5.5mm
- Output: 12V DC @ 6A
- Polarity: Tip Positive
- Short Protection: Yes
- Over Current Protection: Yes
- Over Voltage Protection: Yes
- Size: 110W x 52H x 33D mm.
|
|
12V DC 72W Switchmode Powerpack. Super-compact regulated power supplies. Supplied with fixed 2.1mm DC jack. 100-240V AC input via IEC C13 plug. Energy authority approved. MEPS approved. Dimensions: 110Wx52Hx33Dmm. |
|
MB8939D |
|
- Input Range: 100V to 240V AC
- Output Voltage: 12V DC
- Output Current: 6A
- Barrel Length: 10mm
- Plug Tip Type: 5.5mm outer diameter and 2.5mm inside diameter
- Polarity: Positive centre
- Cable Length: 1.5m
- MEPS Efficiency Level: V
- Australian Standards Compliant
- Suitable for a range of electronic devices
|
|
12V DC 72W Switchmode Powerpack. Super-compact regulated power supplies. Supplied with fixed 2.5mm DC jack. 100-240V AC input via IEC C13 plug. Energy authority approved. MEPS approved. Dimensions: 110Wx52Hx33Dmm. |
 |
M8941 |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- MEPS approved.
|
|
12V DC Switchmode Powerpack. Super-compact regulated power supplies. Supplied with fixed 2.1mm DC jack. 100-240V AC input via IEC C13 socket. Energy authority approved. MEPS approved. Dimensions: 143Wx58x34Dmm. |
 |
M5315C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
Note: Must be used with a 3A external AC fuse. |
 |
M5015C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
These 50VA transformers will fit inside our 1 Unit 19" rack cases |
 |
M5115C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
Efficient toroidal transformer with 15V secondaries. 80VA rated.
|
 |
M4330A |
|
- Primary voltage: 2 x 120V AC
- Total VA rating: 10VA
- Insulation: Class B (130°C)
- Magnetising current: <20mA
- Temperature rise: <85°C
- External AC fuse (required): 100mA
- Thermal fuse: 84°C
- Regulation: ≈20%
- Weight: ≈210g
- PCB hole size: 2mm
- Approval: SAA151379EA
- Note: Must be used with a standard 100mA external AC fuse
|
|
Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for |
 |
M4630A |
|
- Primary voltage: 2 x 120V AC
- Total VA rating: 30VA
- Insulation: Class B (130°C)
- Magnetising current: <30mA
- Temperature rise: <85°C
- External AC fuse (required): 250mA
- Thermal Fuse: 84°C
- Regulation: ≈16%
- Weight: ≈450g
- PCB hole size: 2mm
- Approval: SAA151379EA
|
|
Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for ideal for high performance, low noise circuits. |
 |
P8169 NEW
|
|
- 240V AC 10A outputs (maximum total load 2400W).
- 15 x Australian Sockets (AS/NZS 3112:2017 conforming).
- Electrical authority outlet device approved (AS/NZS 3105:2014 conforming).
- Overload protection.
- Extruded aluminium enclosure.
- 19” vertical rack mountable.
|
|
A 15 GPO outlet vertical PDU (power distribution unit) providing a neat solution to supplying mains power to your rack mounted equipment. Simply screw this panel to your rack and plug the equipment in |
 |
M1124A |
|
- For 100V line use, connect in series, ie. join pink & yellow. Use purple & brown.
|
|
High power toroidal transformer for audio use. Input and output windings can be reversed. |
 |
M8776 |
|
- Phase correction circuitry
- Screw terminals for inputs and outputs
- Wide operating input voltage 90 – 264VAC, 47 – 63Hz
- Excellent output regulation from no load to full load
- High efficiency
- Overload and short circuit protection
- Inbuilt EMI filter to reduce noise radiation
- EMC approved
|
|
Switchmode power supplies offer several significant advantages over traditional linear transformer power supplies.They are far more efficient than their linear counterparts. As they do not use power or mains transformers the equivalent power supply weighs |
 |
P8456 |
|
- Fitted with 3 pin mains socket connector.
- 15cm length.
- 3 x 1mm2 conductors
- Pre-stripped bare end connection.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
This 3 pin mains power socket cord is designed for use by OEM's and installers to connect to mains powered equipment. |
|
P8456A |
|
- Fitted with 3 pin mains socket connector.
- 15cm length.
- 3 x 1mm2 conductors
- Pre-stripped bare end connection.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
This 3 pin mains power socket cord is designed for use by OEM's and installers to connect to mains powered equipment. It is fitted with 3 pin mains socket and pre-stripped bare ends. Rated to 10A. |
 |
M8945A |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
15V DC Switchmode Plugpack Supplied with fixed 2.1mm DC positive tip. Compact design with high current regulated output. Energy authority approved. MEPS approved.
15VDC @ 2.4A.
|
 |
M8945B NEW
|
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
15V DC Switchmode Plugpack Supplied with fixed 2.1mm DC positive tip. Compact design with high current regulated output. Energy authority approved. MEPS approved.
15VDC @ 3.5A.
|
 |
M8886 NEW
|
|
- Cable Included - Includes 16 x 0.3m USB C charging cables.
- 16 High-Power USB-C Ports - Charge up to 16 devices simultaneously with PD3.0 fast charging.
- Massive 1000W Output - Each port supports up to 100W for laptops, tablets, and Chromebooks.
- Secure Device Storage - Durable steel housing with password-lock front door for added security.
- Smart Power Management - Intelligent power allocation for efficient, simultaneous charging.
- Easy Charging Status - Individual LED indicators for each port (green for full, red for charging).
- Comprehensive Safety - Overcurrent, overvoltage, overtemperature, and short-circuit protection.
- Ventilated Design - Perforated panels and ventilation to prevent overheating.
- App-Controlled Charging - Manage schedules and monitor charging via the “innovatecharger” mobile app.
|
COMING SOONThis item is arriving soon. |
Charge, store, and protect up to 16 devices in one smart charging cart. Fast, safe, and secure—ideal for schools and workplaces. Offers USB power delivery charging up to 1000W total output. |
 |
M8883 NEW
|
|
- Massive 1000W Output - Charge up to 16 USB-C devices simultaneously.
- Fast Charging Support - Power Delivery 2.0 & 3.0 with 5V/3A, 9V/3A, 12V/3A, 15V/3A, and 20V/5A profiles.
- Versatile Charging - Supports up to 10 × 100W MacBooks or 16 × 60W Chromebooks/Tablets/Smartphones.
- Smart Cooling - Automatic fan control based on temperature.
- Status at a Glance - Built-in LED indicators for charging status.
- Built to Last - Durable full-metal housing for better heat dissipation.
- Safe & Reliable - Over-temperature, over-voltage, over-current, and short-circuit protection.
- Wide Compatibility - Works with MacBooks, iPads, Chromebooks, smartphones, and more.
|
COMING SOONThis item is arriving soon. |
This 16 port USB C charger allows you to charge up to 16 mobile devices at once. Ideal for workplaces, schools and large families. Keep everything charged up and ready to go. |
 |
M9325A |
|
|
|
16VAC @ 1.38A
Unit has bare ends (no tip fitted)
MEPS Approved.
Dimensions: 80L x 55W x 55D mm |
 |
M9332A |
|
|
|
Compact 16V AC plugpack with 1.38A current output. Earthed connection.
Unit has bare ends (no tip fitted).
MEPS approved. |
 |
M5318C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
18+18V 160VA toroidal transformer. |
 |
M5518C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
300VA toroidal transformer |
 |
M5018C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
Low profile design suitable for use inside our 1RU 19" rack enclosures. 18+18V. |
 |
M5118C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
Efficient toroidal transformer with 18V secondaries. 80VA rated.
|
 |
M8950A |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
18V DC Switchmode Plugpack Supplied with fixed 2.1mm DC tip (tip positive). Compact design with high current regulated output. Energy authority approved. MEPS approved.
18VDC @ 1.33A. |
Powertran