Description Ordering
A4940  3 Pin XLR Cat5 Extender (Transmitter)

3 Pin XLR Cat5 Extender (Transmitter)

A4940

Allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A4941  3 Pin XLR Transmitter Wallplate

3 Pin XLR Transmitter Wallplate

A4941

This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A4954  5 Pin XLR Cat5 Extender (Receiver)

5 Pin XLR Cat5 Extender (Receiver)

A4954

The Redback® A 4954 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output with PTT connection.
A4952  5 Pin XLR Cat5 Extender (Transmitter)

5 Pin XLR Cat5 Extender (Transmitter)

A4952

This handy interface box allows balanced signals to be transmitted over long distances using economical UTP data cabling, and provides easy local zone connection for audio sources.
A4953  5 Pin XLR Transmitter Wallplate

5 Pin XLR Transmitter Wallplate

A4953

This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A4948  Line Level Compressor/Limiter

Line Level Compressor/Limiter

A4948

This compact module is designed to go inline with an audio input source like CD/Blu-Ray etc to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal.
A4904 1 In to 2 Out Audio Splitter

1 In to 2 Out Audio Splitter

A4904

This compact signal splitter is provided with two input sockets. The 3 pin XLR can be configured for either 3mV or 1V sensitivity, whilst the RCA auxiliary input can be set for either 100mV or 1V sensitivity.
A4903A 100V Line to Low Level Adapter

100V Line to Low Level Adapter

A4903A

This small adaptor receives a 100V signal from one amplifier and reduces the level down to either balanced mic level or auxiliary level to feed into the input of a second amplifier.
A4937 3 Input XLR Mic/Line Pre-Amp Bluetooth Wallplate

3 Input XLR Mic/Line Pre-Amp Bluetooth Wal...

A4937 NEW

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music.
A4935 3 Input XLR Mic/Line Pre-Amplifier Wallplate

3 Input XLR Mic/Line Pre-Amplifier Wallplate

A4935

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier.
A4942 3 Pin XLR Cat5 Extender (Receiver)

3 Pin XLR Cat5 Extender (Receiver)

A4942

The Redback® A 4942 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output. The output level is DIP switch selectable, and the ouput volume is screwdriver adjusted via the trimpot on the front of the unit.
A2630 4 Channel Headphone Distribution Amplifier

4 Channel Headphone Distribution Amplifier

A2630

A compact headphone amplifier featuring four individual channels with volume controls. Ideally suited to monitoring in band and stage environments, it can also be used in educational situations such as language labs. Amplification and individual volume c
A4460 4x8 Stereo Audio Switcher System

4x8 Stereo Audio Switcher System

A4460

Designed to distribute 4 stereo audio input sources to 8 stereo output zones, this system is ideal for use in function centres, hotels, meeting rooms and domestic homes etc. It sends audio sources from one room to another with total ease.
A2055A Balanced Mic / Line Input Pre-Amp & Mixer

Balanced Mic / Line Input Pre-Amp & Mixer

A2055A

Features two line inputs and one mic input, each with its own level control. The mic input can be configured for either balanced or unbalanced operation. All inputs are mixed to a single line level output. It can be powered from either a single rail po
A4932 Balanced Microphone/Line Pre Amplifier

Balanced Microphone/Line Pre Amplifier

A4932

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A2513 Balanced To Unbalanced Converter XLR-RCA

Balanced To Unbalanced Converter XLR-RCA

A2513

Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out.
A2515 Balanced To Unbalanced Converter XLR-RCA / Screw Term.

Balanced To Unbalanced Converter XLR-RCA /...

A2515 NEW

Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections).
A4930 Four Output Microphone/Line Hub

Four Output Microphone/Line Hub

A4930

This Microphone/Line Hub is designed to accept audio from up to four A 4931 Mic/Line Preamp wallplates. The Hub has a dedicated output for each wall plate, with front mounted volume controls for each output.
A2524 Line Isolation Transformer 10k ohms to 10k ohms XLR

Line Isolation Transformer 10k ohms to 10k...

A2524

Balanced 10kΩ to 10kΩ balanced 3 pin male XLR with earth lift switch.
A2522 Line Isolation Transformer 10k ohms to 600 ohms XLR

Line Isolation Transformer 10k ohms to 600...

A2522

Balanced 600Ω to 600Ω balanced 3 pin male XLR with earth lift switch.
A2519 Line Isolation Transformer 600 ohms to 600 ohms XLR

Line Isolation Transformer 600 ohms to 600...

A2519

Balanced 600Ω to 600Ω balanced 3 pin male XLR with earth lift switch.
A4905 Mic/Line Pre-Amplifier to Line Level Out Converter

Mic/Line Pre-Amplifier to Line Level Out C...

A4905

This line pre-amp will accept either a microphone or auxiliary input and convert it to a balanced high level signal suitable for distribution up to 500M without interference with up to 3V of output level available. Volume controls are provided for both inputs plus a master volume control. The microphone is a balanced XLR input whilst the auxiliary
A4906 Mic/Line/100V Input to Line +24V Switched Output

Mic/Line/100V Input to Line +24V Switched ...

A4906

The A 4906 is a versatile unit which accepts either a line level signal, balanced microphone signal or 100V input signal. The output signal is a line level signal suitable for feeding into an amplifier.
A4931 Microphone/Line Pre Amplifier Wallplate

Microphone/Line Pre Amplifier Wallplate

A4931

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4931V Microphone/Line Pre Amplifier Wallplate

Microphone/Line Pre Amplifier Wallplate

A4931V

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.

All prices include GST