|
Description |
Downloads |
Specs |
Ordering |
|
 |
Z6431 |
|
|
|
A compact Bluetooth LE module with built in antenna and on board U.FL socket. I2C/SPI serial interface standard output. Ideal DIY projects for mobile devices, game controllers, intelligent appliances etc. |
 |
Z6433 NEW
|
|
- XTensa dual-core 32-bit LX7 CPU, frequency up to 240MHz
- 2.4 GHz Wi-Fi, EEE 802.11 b/g/n-compliant
- Bluetooth, LE: Bluetooth 5, Bluetooth mesh
- 8 MByte(64Mbit) SPI Flash
- 384 KByte ROM
- 512 KByte SRAM
- 8 MByte(64Mbit) SPI PSRAM
- 16 KB SRAM in RTC
- Communication Interfaces: 2 x I2C, 2 x I2S, 4 x SPI, 3 x UART, 1 x USB OTG
- Security: 4096 bit OTP, AES, SHA, RSA, ECC and RNG, Secure boot, Flash encryption, Digital signature, HMAC module
- Dual Type-C USB connectors
- Reset and User/Firmware buttons
- RGB WS2812 User LED
- Power LED
- Virtual USB port provided by CP2102 for debugging and firmware upgrade
- Compact size of 50.1 x 13mm
- Supply Voltage: 5V via USB
- Circuit Voltage: 3.0 to 3.6V Circuit Operation
|
|
The ESP32-S3 development board is assembled with an original ESP32-S3-WROOM-1 module from Espressif, with 16MB Flash and 8MB PSRAM(ESP32-S3-WROOM-1-N16R8). It is a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. |
 |
Z6435 |
|
- Microcontroller Atmel ATmega32U4
- Touch IC Resurgent Semiconductor MPR121
- MP3 decoder IC VLSI Solution VS1053b
- Audio output 15mW into 32Ω via 3.5mm stereo socket
- Removable storage up to 32GB via micro SD card
- Input voltage 3.0V DC – 5.5V DC
- Operating voltage 5V DC
- Max. output current (5V rail) 400mA (100mA at startup)
- Max. output current (3.3V rail) 300mA
- LiPo cell connector 2-way JST PH series - pin 1 +ve, pin 2 -ve
- LiPo charge current 200mA
- Capacitive touch electrodes 12 (of which 8 can be configured as digital I/O)
- Digital I/O Pins 20 (of which 3 are used for the MPR121 and 5 are used for the VS1053b — the latter can be unlinked via solder blobs)
- PWM channels 7 (shared with digital I/O pins)
- Analogue input channels 12 (shared with digital I/O pins)
- Flash memory 32 kB (ATmega32U4) of which 4kB used by boot loader
- SRAM 2.5kB (ATmega32U4)
- EEPROM 1kB (ATmega32U4)
- Clock speed 16MHz (ATmega32U4), 12.288MHz (VS1053b)
- DC current per I/O pin 40mA sink and source (ATmega32U4), 12mA source / 1.2mA sink (MPR121)
- Analogue input resistance 100MΩ typical (ATmega32U4)
|
|
The Touch Board is a microcontroller board with dedicated capacitive touch and MP3 decoder ICs. It has a headphone socket and micro SD card holder (for file storage), as well as having 12 capacitive touch electrodes. It is based around the ATmega32U4 and runs at 16MHz from 5V. It has a micro USB connector, a JST connector for an external lithium po |
 |
Z6439A |
|
- On board speaker
- MEMs Microphone with LED indicator
- Touch sensitive logo
- Built-in sleep/off mode that means the board can be powered-down with batteries connected
- Discrete regulator that can supply up to 190mA of current to external accessories
- 25 Programmable LEDs in a 5 x 5 grid
- 3-axis motion sensing
- On-board magnetometer
- On-board temperature sensor
- On-board light level sensing
- 2 x programmable buttons, A & B
- BLE Bluetooth 5.0
- 2.4Ghz Micro:bit Radio
- Rear-mounted push button
- Power off (push and hold power button)
- 25 pins
- MEMS microphone and LED indicator
- Onboard speaker
- Touch-sensitive logo pin
- LED power indicator
- C++, MakeCode, Python, Scratch
|
|
The Micro:bit is easy to code with, all you need is your web browser and a micro USB cable and you are ready to start all kinds of exciting STEM/STEAM experiments, no need for any extra software to be installed. Micro:bit has also developed a mobile app for coding over Bluetooth (without a USB cable), that makes it even easier to get everyone codin |
|
Z6439B NEW
|
|
- On board speaker
- MEMs Microphone with LED indicator
- Touch sensitive logo
- Built-in sleep/off mode that means the board can be powered-down with batteries connected
- Discrete regulator that can supply up to 190mA of current to external accessories
- 25 Programmable LEDs in a 5 x 5 grid
- 3-axis motion sensing
- On-board magnetometer
- On-board temperature sensor
- On-board light level sensing
- 2 x programmable buttons, A & B
- BLE Bluetooth 5.0
- 2.4Ghz Micro:bit Radio
- Rear-mounted push button
- Power off (push and hold power button)
- 25 pins
- MEMS microphone and LED indicator
- Onboard speaker
- Touch-sensitive logo pin
- LED power indicator
- C++, MakeCode, Python, Scratch
|
|
The Micro:bit is easy to code with, all you need is your web browser and a micro USB cable and you are ready to start all kinds of exciting STEM/STEAM experiments, no need for any extra software to be installed. Micro:bit has also developed a mobile app for coding over Bluetooth (without a USB cable), that makes it even easier to get everyone codin |
 |
Z6440A |
|
- On board speaker
- MEMs Microphone with LED indicator
- Touch sensitive logo
- Built-in sleep/off mode that means the board can be powered-down with batteries connected
- Discrete regulator that can supply up to 190mA of current to external accessories
- 25 Programmable LEDs in a 5 x 5 grid
- 3-axis motion sensing
- On-board magnetometer
- On-board temperature sensor
- On-board light level sensing
- 2 x programmable buttons, A & B
- BLE Bluetooth 5.0
- 2.4Ghz Micro:bit Radio
- Rear-mounted push button
- Power off (push and hold power button)
- 25 pins
- MEMS microphone and LED indicator
- Onboard speaker
- Touch-sensitive logo pin
- LED power indicator
- C++, MakeCode, Python, Scratch
|
|
The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile. |
 |
Z6441 |
|
- 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
- 1 analog input(3.2V max input)
- a Micro USB connection
- Compatible with MicroPython, Arduino, nodemcu
|
|
This USB WiFi module is a complete and self-contained WiFi network solution that can operate independently or as a slave on other host MCUs. It can be booted directly from an external flash when it is powered by an application and is the only application processor in the device. The built-in cache helps improve system performance and reduce memory |
 |
Z6442 |
|
- Drive 2 DC motors with speed and direction control
- Drive 1 stepper motor
- 5 – 35V motor voltage range
- 2.5A peak current per channel (2A continuous)
|
|
Uses an L298N H-Bridge designed to drive inductive loads, such as relays, solenoids, DC and stepping motors. It can also drive two independent DC motors or 1 stepper motor at 2A continuous current per channel. Standard Arduino shield dimensions with analog and digital output headers. 5V input. |
 |
Z6444 |
|
- Very small micro size (22.8×12.2×28.5mm)
- Fairly strong, can lift 1.75kg positioned 1 cm from centre of shaft
- 180 degree rotation
- Sturdy metal gears
- Analog drive
- Operating voltage: 4.8 to 6V.
|
|
This servo motor is a micro size 180 degree analog servo with metal gears and robust construction. This motor works well for basic servo experimentation and can be used in applications where small size is a virtue and that don't require a huge amount of torque, but they are still pretty strong. |
 |
Z6451 |
|
- Assembly manual included, plus YouTube tutorials available
- Includes all motors, Arduino board, components, wiring, chassis and tracks
- Bluetooth controllable from a smartphone
- Fully customisable
- Requires 2 x 14500 batteries
|
|
This smart car kit uses the power of Arduino to provide a customisable line tracking and obstacle avoidance robot which can be modified, tweaked and upgraded. It features 4 wheels with acrylic
base. The IR and line tracking sensors keep the robot from bumping
into anything, whilst on board bluetooth allows control from your
smartphone. |
 |
Z6452 |
|
- Manual control, line tracking or obstacle avoidance modes
- Bluetooth control
- 6x AAA or 2x 18650 lithium powered
- Easy modular wiring
- Block programming via Scratch software
|
|
STEM bot is an easy to program 2 wheel obstacle avoidance and line tracking robot. Coding your program is easy using the standard Arduino software. Wiring and construction has been designed to be as simple as possible. |
 |
Z6454 |
|
- Works with BBC Micro:bit
- Micro:bit slot allows students to adjust and test code revisions
- Ideal for classroom & STEM workshop environments
- RGB LED light ring
- Easy wiring and construction
- Infra-red and ultrasonic based avoidance
- Line tracking capability
- Photo cell for light intensity detection
- Powered by long life 18650 lithium cells
- Bluetooth controllable
|
|
STEM bot is an easy to program 2 wheel obstacle avoidance and line tracking robot. Coding your program is easy using the standard BBC Micro:bit software. Wiring and construction has been designed to be as simple as possible. |
 |
Z6455 |
|
- Operating Voltage: 3.3 V
- Pressure Range: 300-1100 hPa (equivalent to +9000 to -500m above / below sea level)
- Temperature Range: -40 to +85°C
- PCB Size: 15.5 x 11.5 mm
|
|
Introducing the new BME280 sensor, an environmental sensor with temperature, barometric pressure and humidity! |
 |
Z6457 |
|
|
|
In this kit, we provide the hardware of the DIY game console. You can design your own game code, upload and play! |
 |
Z6459 |
|
|
|
Connects to a 16x2 LCD module allowing you to drive the screen from just 2 IO pins on an Arduino development board. 5V input. Supports I2C protocol. |
 |
Z6460 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
This adaptor shield allows you to breakout all pins on the BBC micro:bit and plug it directly into a breadboard for designing. |
 |
Z6461 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Features an adhesive breadboard, plus matching solder masked PCB holes underneath for when you want to solder down your design. All micro:bit pins broken out to headers. |
 |
Z6462 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
This control board features 4 x 3A 120V AC/24V DC rated relays for building in device control, and trigger other systems in your design.
|
 |
Z6463 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
This power breakout board allows you to break out all the micro:bit pins, plus provides power via 2 x AA batteries. The board also includes short power lead adaptor. |
 |
Z6464 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
This sensor connection shield allows you to breakout all digital and analog interfaces plus adds I2C serial port and SPI comms interfaces. |
 |
Z6465 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Transform your micro:bit into a handheld game pad or use it as a controller for othe projects. |
 |
Z6466 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Plug in your micro:bit and breakout every pin to a standard header. Allowing you to connect it to other components using jumper wire. |
 |
Z6467 |
|
- In-built W5500 ethernet controller for instant IoT connection for your Arduino design
- Uses standard libraries
- On-board MicroSD card slot
- atmega328p UNO compatible microcontroller
- Standard pin outs and fully shield compatible
- Works with standard Arduino libraries and an updated IDE.
|
|
This W5500 ethernet development board is based on the microcontroller of Arduino Ethernet. The board features integrated USB download, TF card slot and more functions on it. Its also fully compatible with UNO pins. |
 |
Z6468 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Transform the pins of the micro bit motherboard into female headers allowing you to easily connect leads and build circuits. With the addition of a power module the breakout board can directly provide power for the micro bit board and load the capability of the breakout board. |
 |
Z6469 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Make it easy for your micro bit to drive it''s DC motor with this breakout board. Alongside its TB6612FNG chip thats integrated into the board it also features 4 motor controls. The board also features a serial communication port to facilitate the connection of bluetooth module. |
 |
Z6471 |
|
|
|
Ideal for adding nigh vision to a pi camera or other surveillance or monitoring application. Provides 3W of infra red light. Requires 5V DC input. Sold in a pair. |
 |
Z6472 |
|
- Raspberry Pi Night Vision Camera.
- Compatible with all revisions of the Raspberry Pi
- 5 Megapixel OV5647 Camera
- 2 x 1W high-power 850 infrared LEDs
- Onboard photo-resistor to detect ambient light
- Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
|
|
plugs directly into the CSI connector on the Raspberry Pi, and features two high-intensity Infrared LED spotlights for night time recording! |
 |
Z6473 |
|
- Sensor: OV5647, 5MP 2592x1944 pixels
- Pin: 22
- Pitch: 0.5mm
- AVDD: 2.7-3.3V (Typical2.8V)
- DVDD: 1.45-1.8V
- DOVDD: 1.7-3.3V
- Lens Structure: 4P (650nm)
- EFL: 3.52
- FNO: 2.8
- Output Format: YUV or RAW RGB
- 1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p)
- F2.9 lens, 3.60 mm focal length
- 170° Fisheye
|
|
This Raspberry Pi 5MP Fisheye Camera Module is a compact camera module to suit the Raspberry Pi. This module offers 5MP resolution with a fish eye lens. It allows your Pi to record 1080p HD video at 30fs. 2592x1944 still shot. Suitable for use in time lapse, CCTV monitoring, web cam applications etc.
|
 |
Z6474 |
|
|
|
This cable allows users to extend the length of their camera cable. |
 |
Z6475 |
|
|
|
This cable allows users to extend the length of their camera cable. |
 |
Z6476 |
|
|
|
This cable allows users to extend the length of their camera cable. |
 |
Z6477 |
|
|
|
This cable allows users to extend the length of their camera cable. |
 |
Z6478 NEW
|
|
- Sensor size: 3.67 x 2.74 mm (1/4 format).
- Pixel count: 2592 x 1944.
- Pixel size: 1.4 x 1.4 um.
- Up to 90 fps video at vga.
- Sensor type: omnivision ov5647 color cmos qsxga (5-megapixel).
- Full-frame slr lens equivalent: 35 mm.
- Fixed focus: 1 m to infinity.
|
|
This camera module has been designed to be used with raspberry pi boards
|
 |
Z6479 |
|
|
|
This cable allows standard Pi cameras to be connected to the Pi Zero camera header. |
 |
Z6480 |
|
|
|
A control shield suitable for use with the Arduino UNO to power and control the Z 0977 8x8 RGB LED module. Create colourful effects, display symbols and text using this creative shield. 5V DC input. DM163 & M54564FP controller on board. |
 |
Z6481 |
|
|
|
Allows easier access to SD card slots in custom cases and enclosures for Pi, 3D printers & IoT boards. |
|
Z6483 |
|
|
|
Allows easier access to SD card slots in custom cases and enclosures for Pi, 3D printers & IoT boards. |
|
Z6486 |
|
|
|
Allows easier access to SD card slots in custom cases and enclosures for Pi, 3D printers & IoT boards. |
 |
Z6500 |
|
- Multi-function expansion board
- Compatible with Arduino
- Supports SPI Interface, IIC interfaces, SD card, TLC5940
|
|
This interface shield supports multi-interfaces, SPI, IIC and SD Card. |
 |
Z6502 |
|
- Power Supply: 4.5～5.5V
- Microcontroller: ST7920
- Resolution: 128×64
- Display Colour: Blue lit with white character
- View angle: 170 °C
- LCD module: STN
- Control interface: 8/4 bits Parallel (Default) or 3 bits serial (SPI)
- Module size: 93x70x22mm (3.7x2.8x0.87'"")
- Visuable size: 73x39mm (2.9x1.5'"")
|
|
This LCD module uses a 128x64 liquid crystal display that supports Chinese characters, English characters and even graphics. It is suitable for interactive work with Arduino.
|
 |
Z6510A |
|
- 2.8" diagonal LCD TFT display
- 240x320 resolution
- ILI9341 controller with built in video RAM buffer Works with any Arduino '328 or Mega
- 5V compatible! Use with 3.3V or 5V logic
- With white LED backlight.
- Support Mini SD card extension
- Dimensions: 78x52x16mm
- Weight: 38g
|
|
This 2.8" TFT Touchscreen is designed to suitable for Arduino UNO/Mega2560. It can directly plug into the UNO/Mega2560 board without any wiring and soldering. It's Library is compatible with Adafruit TFT touchscreen shield, which is easy to use. |
 |
Z6513 |
|
- 5’’ standard display, 800 × 480 resolution
- With resistive touch screen, support touch control
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input, compatible with and can be directly connected to Raspberry Pi (3rd, 2nd, and 1st generation)
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution need to be able to force output for 800 x 480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT (resistive touch)
- Work as a PC monitor, support XP,win7, win8, win10 system(do not support touch)
|
|
A 800 x 480 touchscreen for Raspberry Pi that supports standard HDMI interface input, compatible with and can be directly connected to Raspberry Pi (3rd, 2nd, and 1st generation). |
 |
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
 |
Z6520 |
|
- Voltage: 5V or 3.3V
- Max power consumption: 110mA at 5v
- Interface: SPI
- Pixel resolution: 128x64
- Display size: 2.7 inch
- Module size: 85x58x6.5mm
|
|
This display provides 128x64 pixels, which is highly suitable for the Arduino controller. Thus by using hardware SPI, the response can be very fast. Meanwhile the powerful "u8glib" library for Arduino makes it easy to use. |
 |
Z6522A |
|
|
|
Features a FT232 conversion chip, which has high precision, outstanding stabilization, and anti-interference. It can provide 5V power output with a self-resetting fuse to protect your device.
|
 |
Z6524A |
|
- Screen size: 1.44 inch
- Interface: SPI
- Resolution: 128*128
- Visual area: 1:1 square
- TFT colour screen, the effect is far better than other small CSTN screen
- Drive IC: ST7735
- Onboard LDO, support 5V/3.3V input voltage, the LED backlight, 3.3V input
- Dimensions: 44x31x13mm
- Weight: 10g
|
|
This Color TFT LCD display has 128 x 128 resolution and 262 color. It uses SPI interface to communicate with controller such Arduino, it is the best upgrading of the Nokia5110. |
 |
Z6525 |
|
- Supply Voltage: 3.3V to 5V
- Number of Pixels: 128 × 64
- Colour Depth: Blue
|
|
A compact monochrome 128x64 OLED display module with I2C/SPI communication. 3-5V input. 22x22x12mm. |
 |
Z6527 |
|
- Support Arduino Mega2560 Directly inserted
- With Full-angle IPS TFT panel
- On Board level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5V operation voltage level
- Compatible with Arduino-Series development Board.
- Provided 12-examples with Arduino ,3-examples with STM32
- With SD Card Socket
- With SPI FLASH circuit
|
|
A 480x320 display shield for the Arduino Mega utilising the ILI9481 chipset. Ideal for projects requiring sensor monitoring. 5V/3.3V input. |
 |
Z6527A NEW
|
|
- Support Arduino Mega2560 Directly inserted
- With Full-angle IPS TFT panel
- On Board level conversion chip for 5V/3.3V MCU
- Compatible with 2.8~3.3V operation voltage level
- Compatible with Arduino-Series development Board.
- Provided 12-examples with Arduino ,3-examples with STM32
- With SD Card Socket
- With SPI FLASH circuit
|
|
A 480x320 display shield for the Arduino Mega utilising the ILI9486 chipset. Ideal for projects requiring sensor monitoring. |
 |
Z6528 |
|
- 320×480 resolution
- Resistive touch control
- Supports any revision of Raspberry Pi (directly-pluggable)
- Drivers provided (works with your own Raspbian/Ubuntu directly)
- Size perfectly fits the Pi
- High quality immersion gold surface plating
- Supports Raspbian system, enables your system to take photos by touching.
- Support software keyboard (system interaction without keyboard/mouse)
- Includes touch stylus
|
|
A 480x320 LCD touchscreen to suit your Raspberry Pi. It''s an ideal size for monitoring projects, home automation, even mini retro arcade handheld gaming. Plugs into the Raspberry Pi GPIO header and works directly with Raspbian and Ubuntu. Dimensions almost match the size of the Pi, making it perfect for a compact IoT project. Includes touch stylus |
