Description Ordering
Z6304 Raspberry Pi Sense Hat Sensor Board

Raspberry Pi Sense Hat Sensor Board

Z6304

The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins. The Sense HAT has several integrated circuit based sensors that can be used for many different types of experiments, applications, and even games.
Z6305A 8MP RPI Camera to suit Raspberry Pi

8MP RPI Camera to suit Raspberry Pi

Z6305A ROHS

The Raspberry Pi camera module v2 replaced the original camera module in April 2016. The v2 camera has a Sony IMX219 8-megapixel sensor (compared to the 5-megapixel OmniVision OV5647 sensor of the original camera).
Z6306A 8MP NOIR RPI Camera to suit Raspberry Pi

8MP NOIR RPI Camera to suit Raspberry Pi

Z6306A ROHS

The Raspberry Pi NOIR Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface.
Z6307 Raspberry Pi Prototyping HAT

Raspberry Pi Prototyping HAT

Z6307

A HAT board with soldermasked 0.1
Z6308 FlickHAT 3D Tracking & Gesture HAT for Raspberry Pi

FlickHAT 3D Tracking & Gesture HAT for Ras...

Z6308 ROHS

Swipe, tap or flick your wrist to control your Raspberry Pi with the Flick HAT. Flick uses technology that enables the PCB to detect your gestures from up to 15cm away in 3D space. Draw a circle with your hand
Z6309 Raspberry Pi Official 7

Raspberry Pi Official 7" Capacitive Touch ...

Z6309

The 7" Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board.
Z6344 Raspberry Pi GPIO Breakout Expansion Kit

Raspberry Pi GPIO Breakout Expansion Kit

Z6344

Breaks out the 40 pin GPIO bus of your Raspberry Pi and connects it to a 500 pin breadboard. Making it perfect for experimenters to start prototyping and interfacing directly with the Raspberry Pi.
Z6400 Hifiberry DAC+ RCA Module to suit Raspberry Pi

Hifiberry DAC+ RCA Module to suit Raspberr...

Z6400

The HiFiBerry DAC+ is a high-resolution digital-to-analog converter for the Raspberry Pi Model A+/B+ and 2B. This is a special sound card for the Raspberry Pi, that is optimized for one specific use: High fidelity audio playback.
Z6402 Hifiberry Digi+ Toslink Coaxial Module to suit Raspberry Pi

Hifiberry Digi+ Toslink Coaxial Module to ...

Z6402

The HiFiBerry Digi+ is a high-quality S/PDIF output board for the Raspberry Pi model A+/B+ and the new Raspberry Pi 2. It is designed as an add-on board that connects to the P1 and P5 header of the Raspberry Pi.
Z6404 Hifiberry Amp+ 25W Stereo Amplifier Module to suit Raspberry Pi

Hifiberry Amp+ 25W Stereo Amplifier Module...

Z6404

The HiFiBerry Amp+ is a high-quality, highly efficient Class-D power amplifier for the Raspberry Pi. Mount it onto the Raspberry Pi mode A+,B+ or the new Raspberry Pi 2 and you have a stereo audio system.
Z6405 Hifiberry Amp2 60W Stereo Amplifier Module to suit Raspberry Pi

Hifiberry Amp2 60W Stereo Amplifier Module...

Z6405

The HiFiBerry Amp is a high-quality, highly efficient Class-D power amplifier for the Raspberry Pi.
Z6412 Raspberry Pi CaseHAT Prototyping Board

Raspberry Pi CaseHAT Prototyping Board

Z6412

A prototyping HAT that fits inside a Raspberry Pi case! Soldermasked 0.1
Z6413 Raspberry Pi CaseHAT SOIC28 Prototyping Board

Raspberry Pi CaseHAT SOIC28 Prototyping Board

Z6413

A prototyping HAT that fits inside a Raspberry Pi case! Soldermasked 0.1
Z6420 Desktop Computer Case Kit to suit Raspberry Pi 3 Model B

Desktop Computer Case Kit to suit Raspberr...

Z6420

Turn the Raspberry Pi into a fully fledged desktop computer with this case & expansion board kit. Provides an intelligent and safe power controller, a real time clock and a high capacity mSATA SSD hard drive interface. Case provides a neat finish with access to all the Raspberry Pi ports.
Z6425 POE Hat to suit Raspberry Pi 3 Model B+

POE Hat to suit Raspberry Pi 3 Model B+

Z6425

Allows you to power the Raspberry Pi 3 Model B+ over ethernet. Great for remote IoT applications or any project where getting power to the location is difficult.
Z6430 Pi Cap Module to suit Raspberry Pi

Pi Cap Module to suit Raspberry Pi

Z6430

The Pi Cap is an addon board for the Raspberry Pi A+, B+, 2 B, 3 B and Zero. It features a dedicated capacitive sensing IC, 3.5mm stereo audio output, push switch, RGB LED and prototyping area
Z6471 Raspberry Pi Camera IR LEDs

Raspberry Pi Camera IR LEDs

Z6471 NEW

These cameras plug directly into the CSI connector on the Raspberry Pi. They feature two high intensity Infrared LED''s ideal for night time recording! The IR LED''s are powered directly from the CSI port.
Z6473 Raspberry Pi 5MP Fisheye Camera Module

Raspberry Pi 5MP Fisheye Camera Module

Z6473 NEW

This Raspberry Pi 5MP Fisheye Camera Module is a compact camera module to suit the Raspberry Pi. This module offers 5MP resolution with a fish eye lens. It allows your Pi to record 1080p HD video at 30fs. 2592x1944 still shot. Suitable for use in time lapse, CCTV monitoring, web cam applications etc.
Z6474 0.2m Raspberry Pi® Camera Extension Cable

0.2m Raspberry Pi® Camera Extension Cable

Z6474 NEW

This cable allows users to extend the length of their camera cable.
Z6475 0.5m Raspberry Pi® Camera Extension Cable

0.5m Raspberry Pi® Camera Extension Cable

Z6475 NEW

This cable allows users to extend the length of their camera cable.
Z6476 1m Raspberry Pi® Camera Extension Cable

1m Raspberry Pi® Camera Extension Cable

Z6476 NEW

This cable allows users to extend the length of their camera cable.
Z6477 2m Raspberry Pi® Camera Extension Cable

2m Raspberry Pi® Camera Extension Cable

Z6477 NEW

This cable allows users to extend the length of their camera cable.
Z6479 Raspberry Pi® Zero To Pi Camera Cable

Raspberry Pi® Zero To Pi Camera Cable

Z6479 NEW

This cable allows standard Pi cameras to be connected to the Pi Zero camera header.
Z6513 5” LCD 800 x 480 HDMI Touchscreen For Raspberry Pi

5” LCD 800 x 480 HDMI Touchscreen For Ra...

Z6513

A 800 x 480 touchscreen for Raspberry Pi that supports standard HDMI interface input, compatible with and can be directly connected to Raspberry Pi (3rd, 2nd, and 1st generation).
Z6514 7” LCD 800 x 480 HDMI Touchscreen For Raspberry Pi

7” LCD 800 x 480 HDMI Touchscreen For Ra...

Z6514

A 800x480 resolution 7" touchscreen for Raspberry Pi that supports standard HDMI interface input, compatible with and can be directly inserted with Raspberry Pi (3rd, 2nd, and 1st generation).

All prices include GST