|
Description |
Downloads |
Specs |
Ordering |
|
 |
C1063 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1064 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
 |
A4437 NEW
|
|
- 4 mic or line inputs
- Balanced line or RCA outputs
- VOX priority on input 1 and 2
- Phantom power ON/OFF for mic inputs
- Remote evacuation system muting contacts
- 24V DC operation
- Individual volume, treble and bass for all inputs
- Provision for A4573 alert evac tone generator module
- Australian designed and manufactured.
|
|
Works as a stand alone audio processor with four mic/line inputs for microphone and music sources. When the FIB operates it triggers these contacts, rending the local PA/BGM system inoperative so the main emergency evacuation system has precedence. |
 |
A4565A |
|
- Tones conform to AS 1670.4
- Standard 1U 19” rack mount case
- Interfaces with Fire Indicator Boards
- Remote operation of Alert, Evac, Chime, Fire Test, Fire Alarm & Cancel tones
- MP3 based tone playback (with backup hard coded Alert, Evac and Bell tones)
- 24V DC operation
- Auto/Manual/Isolate keyswitch
- Key switch to 003 standard
- Local operation of Alert, Evac and PA
- MP3 based Voice Over messages for Alert and Evac cycles
- Microphone socket for PA use
- Provision for BGM (back ground music)
- Provision for Auxiliary input with front volume control
- Bell chime facility
- Switched 24V DC output for override relays on volume controls
- Switched 24V DC output for strobe operation for Alert mode
- Switched 24V DC output for strobe operation for Evac mode
- Switched 24VDC output for bell mode
- On-board timer for automatic Alert to Evac switchover, adjustable from 30secs to 7.5min in 30 second increments
- Externally operated inputs are activated by switching to ground
- Auxiliary level output
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This easy to operate building alert & evacuation controller controller is designed around industry standard building requirements. When connected to a paging system amplifier, occupants can be alerted and/or evacuated in the event of an emergency eg: fire, gas leak, bomb scare, earthquake. |
 |
A4565C NEW
|
|
- Tones conform to AS 1670.4
- Standard 1U 19” rack mount case
- Interfaces with Fire Indicator Boards
- Remote operation of Alert, Evac, Chime, Fire Test, Fire Alarm & Cancel tones
- MP3 based tone playback (with backup hard coded Alert, Evac and Bell tones)
- 24V DC operation
- Auto/Manual/Isolate keyswitch
- Key switch to 003 standard
- Local operation of Alert, Evac and PA
- MP3 based Voice Over messages for Alert and Evac cycles
- Microphone socket for PA use
- Provision for BGM (back ground music)
- Provision for Auxiliary input with front volume control
- Bell chime facility
- Switched 24V DC output for override relays on volume controls
- Switched 24V DC output for strobe operation for Alert mode
- Switched 24V DC output for strobe operation for Evac mode
- Switched 24VDC output for bell mode
- On-board timer for automatic Alert to Evac switchover, adjustable from 30secs to 7.5min in 30 second increments
- Externally operated inputs are activated by switching to ground
- Auxiliary level output
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This easy to operate building alert & evacuation controller controller is designed around industry standard building requirements. When connected to a paging system amplifier, occupants can be alerted and/or evacuated in the event of an emergency eg: fire, gas leak, bomb scare, earthquake. |
 |
A4411 |
|
- 2 microphone inputs
- Phantom power on MIc inputs (15V DC)
- 2 line inputs
- Separate tone controls for line and microphones
- Stereo outputs
- 1RU 19” rack mount case
- Master volume on rear panel
- Adjustable line muting
- Front panel mount microphone and line input
- Subwoofer output
- LED VU meter
- VOX active indicator
- Signal Present indicator
- 24V DC input
- 24V DC battery back up terminals
- 10 Year Warranty
- Australian designed & assembled
|
|
This 4 Channel Stereo Mixer has been designed to meet the growing demands of PA systems utilising high power stereo amplifiers, it features 2 balanced microphone and 2 auxiliary inputs. Perfect for aerobics use, bars, bistros, sporting clubs. |
 |
A4037 |
|
- 3 balanced microphone inputs
- Phantom power on mic inputs
- 3 line inputs
- 19” rack mount kit included
- VOX muting
- Tape output RCA sockets
- Bass and treble tone controls
- 100V line output (note: this model cannot be converted to 70V line as per others in the series)
- 240V AC or 24V DC operation
- Built in short circuit protection
- 10 year warranty
- Optional evac module available
- Optional remote volume module
- Australian designed & assembled
|
|
Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 40W RMS respectively. |
 |
A4245A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- 3.5mm Jack Input (Front Mounted)
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation. |
 |
A4219 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
|
This 2 x 60W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
A4220 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
|
This 120W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
A4567C |
|
- This unit is designed for “loop in loop out” serial wiring to loudspeakers with a 47KΩ terminating resistor at the end of the line. Star wiring or tee offs are prohibited. Each loudspeaker requires a series connected 22µf bipolar capacitor for correct operation. A delay of 10 seconds is provided before registering a fault to minimise false alarms.
|
|
Specifically designed to monitor the condition of 100V line speaker systems in emergency paging and fire evacuation installations. Many large commercial installations have speaker circuits in excess of 250W. |
 |
A4461 |
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant zone wall plates & main Redback units.
- Adjust custom labelling of zones and inputs on screen.
- Choose button colour theme.
- Fits standard double gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
These 7" touchscreen control wall plates allow for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
 |
A4463 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant zone wall plates & main Redback units.
- Adjust custom labelling of zones and inputs on screen.
- Choose button colour theme.
- Fits standard double gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
These 7" touchscreen control wall plates allow for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
 |
A1937 |
|
- Powered by 24V DC
- 100V line audio output
- Line level audio input
- Short circuit, overload and thermal cutout protection
- Bolt-in chassis construction
|
|
These modules are designed for use in emergency evacuation systems and are powered by an external 24V DC source. They accept a line level audio input and produce a 100V line output via a transformer. The modules feature short circuit, overload and therm |
 |
A4240A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- Phantom power
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
|
|
These compact 1RU rack mount ampliers are suitable for both stand alone PA system use, or as zone ampliers in
larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation. |
 |
A4235 |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- Overload limiting
- Over voltage limiting
- On demand fan cooling
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V ac / 24V dc operation
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation.
All models include a choice of |
 |
A4235A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- Overload limiting
- Over voltage limiting
- On demand fan cooling
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V ac / 24V dc operation
|
|
This compact 30W 1RU rack mount amplifiers is suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. Operates on 240V ac or 24V dc for battery backup operation. |
 |
A2704B |
|
- IR remote control
- Dual outputs
- Dual AM & FM analogue aerial inputs
- Rear mounted level controls
- 40AM/60FM presets per tuner
- Mono/stereo selector
- RS-232 control
- PLL synthesised tuner
- LCD readout
- 240V AC operation
|
|
This dual tuner is ideal for multi zone audio systems requiring separate programming in each zone. This compact 1RU device contains two individual tuners utilising Phase Locked Loop (PLL) synthesised circuitry to ensure excellent frequency stability. |
 |
C0995 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
A6530 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal 7" touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
 |
A6531 |
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal 7" touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
 |
A4420C NEW
|
|
- 6 microphone and 2 line inputs
- All mic inputs are 3 pin XLR balanced
- Line inputs via twin RCA sockets
- Separate bass and treble tone controls
- Individual input and master volume controls
- Optional VOX muting of line inputs
- Optional phantom power for each mic input
- Microphone bass cut internally selectable
- Mic inputs routed via tone controls or bypassed
- 24VDC input
|
|
This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. |
 |
C1065 |
|
- Rated power: 240W @ 4Ω
- Power taps: 60, 120, 240W
- Max SPL: 112dB
- Freq response: 30Hz - 150Hz
- Weight: 7.5kg
- Dimensions (mm): 367 x 330Dmm
|
|
High power commercial grade 10" subwoofer for providing additional low end response to foreground music and hi-fi applications. |
 |
A4462 |
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant master wall plates & main Redback units.
- Fits standard single gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
This 4.3" touchscreen control wall plate allows for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
 |
A4464 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant master wall plates & main Redback units.
- Fits standard single gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
This 4.3" touchscreen control wall plate allows for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
Redback