|
Description |
Downloads |
Specs |
Ordering |
|
 |
C1068 NEW
|
|
- Compact high performance 100V line outdoor speaker.
- Stylish low profile design for outdoor BGM and paging.
- Durable construction with ABS cabinet and aluminium grille/bracket.
- Full range of sound through 2-way driver - fantastic speech inteligibility and music performance.
- Long throw speaker system with maximum SPL at 120dB peak.
- IP55 moisture and dust protection rating.
|
COMING SOONThis item is arriving soon. |
This all weather long throw PA speaker is a compact yet powerful two-way speaker designed for both indoor and outdoor use, featuring a sturdy bracket mount and a sleek ABS enclosure. |
 |
C1067 NEW
|
|
- Compact high performance 100V line outdoor speaker.
- Stylish low profile design for outdoor BGM and paging.
- Durable construction with ABS cabinet and aluminium grille/bracket.
- Full range of sound through 2-way driver - fantastic speech inteligibility and music performance.
- Long throw speaker system with maximum SPL at 120dB peak.
- IP55 moisture and dust protection rating.
|
COMING SOONThis item is arriving soon. |
This all weather long throw PA speaker is a compact yet powerful two-way speaker designed for both indoor and outdoor use, featuring a sturdy bracket mount and a sleek ABS enclosure. |
 |
A4455 NEW
|
|
- 4 inputs, 8 outputs
- Optional Touchscreen master plate or paging console can control & set up all zones
- Optional Touchscreen zone plate
- Zone paging via optional A 4660A Paging Console
- Emergency Tone activation via optional A 4660A Paging Console, wall plates or rear triggers
- Emergency tones available in Evacuation or Lockdown modes
- Bluetooth input via wall plates (local zone only)
- Optional Priority/Mute input
- System cabling via Cat5e UTP.
- Suits all size power amps
- 24V DC operation
|
COMING SOONThis item is arriving soon. |
This Redback 4x8 audio switcher is designed to distribute four audio input sources to eight output zones. Allows seamless transmission of audio between rooms with ease. |
 |
A4505D NEW
|
|
- MP3 audio format for Bell, Prebell and Music timing outputs
- MP3 audio format Emergency Tones conform to AS 1670.4 (supplied)
- Random play of MP3 files for Prebell and Music triggers
- Easy PC based timing event setup
- Local push button operation of Lockdown, Fire and Bell
- Remote triggering of Lockdown, Fire and Bell
- MP3 audio format Voice over message (Available in the Lockdown and the Fire cycle)
- Switched 24VDC output for Bell, Lockdown or Fire mode
- Pluggable screw terminal connections
- Auxiliary level output
- Battery backup of current time
- 24V DC operation
- Standard 1U 19” rack mount case
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
A timed audio announcement, lockdown and fire alarm controller all housed in a convenient 1RU rack mount chassis. A total of 50 event switching times are available through the timing functions. |
 |
A4500D NEW
|
|
- MP3 audio format files required for Bell, Prebell and Music timing outputs
- Emergency Tones conform to AS 1670.4 (supplied)
- Random play of audio files for Prebell and Music triggers
- Easy PC based timing event setup
- Local push button operation of Alert, Evac, Bell and Isolate
- Remote triggering of Alert, Evac and Bell functions via closing contacts
- Remote triggering of Alert, Evac, Bell and Isolate functions via optional wall plates
- Emergency Paging (Optional via Redback® A 4660A)
- Voice over message (In Evacuation cycle)
- Switched 24VDC output for Bell, Alert or Evac mode
- Pluggable screw terminal connections
- Auxiliary level output
- Battery backup of current time
- 24V DC operation
- Standard 1U 19” rack mount case
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
A weekly timer and Evacuation controller all housed in a convenient 1RU rack mount chassis. A total of 50 “event” switching times are available through the timing functions. Each event can be set to turn on any single day of the week or on multiple days, from 1 sec up to 24 hours. |
 |
A4280A NEW
|
|
- Multi-stage thermally cued fan cooling
- 2U 19” rack mount (with optional A 4376)
- Tape record out terminals
- Provision for connection to Redback A4660 touchscreen paging console
- MP3 based Alert/Evac tones with MP3 voice over message for emergency tones (built in)
- 3 mic input and 4 auxiliary inputs
- Phantom powering available on all inputs
- Adjustable vox muting on inputs 1 & 2.
- Bass and treble tone controls
- Terminals for 100V line output
- 240V AC or 24V DC power operation
- Thermal & fuse overload protection
- Built in short circuit protection
- Australian designed & assembled
|
|
This Redback 4 Zone 250 Watt 100V Public Address Mixer Amplifier is similar in functionality to our A4387A amplifier, with the addition of four 100V line output zones. During normal use, you are able to select via the front panel switches, any zone on or off to control BGM programming. |
 |
A4933 NEW
|
|
- Frequency Response:
- Mic input: 140Hz - 20kHz
- Aux input: 140Hz - 20kHz
- Music input: 140Hz - 20kHz
- Input Sensitivity:
- Mic input: 1mV -13mV balanced
- Aux input: 40mV - 800mV balanced
- Music input: 40mV - 800mV balanced
- Connectors:
- Mic Input: 3 pin XLR
- Aux Input: 2 x RCA
- Music Input: 3.5mm Stereo Socket
- General:
- Output: RJ45 8P8C
- Data transmission: Cat5e/6 cabling (max 200 metres)
- Bluetooth Version: 5.1
- Bluetooth Range: 30m average (clear line of sight)
- Weight: ≈0.11kg
- Power: Powered over Cat5e/6 cable
|
|
This Microphone/Line Pre Amplifier Wallplate accepts either a microphone level, line level, music or bluetooth input and converts the signal to a balanced high level output. |
 |
C2186VC NEW
|
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts
- SPL 1W @ 1m: 91dB @ 1kHz ±2dB
- Freq response: 90Hz - 20kHz
- Grille: Steel
- Ceiling cutout: 195mm Ø
- Mounting depth: 100mm
- Terminal type: 2 way screw terminal
|
|
The C2186VC is a 165mm (6.5") dual cone speaker with a 5W transformer and inbuilt volume pot. |
 |
C8825 NEW
|
|
- The dual-channel home theater karaoke wireless microphone system has Ultra-High Frequency (UHF) for interference free performance.
- HDMI, Optical and 1/8” (3.5mm) input and output for instant Karaoke fun.
- Compatible with an array of devices including TV, Smart TV, Blue-Ray player, notebook, iPad, tablet, home theater, receiver, speaker, etc.
- The portable receiver and audio mixer supports up to two wireless microphones (included) and two wired microphones (not included).
- Adjustable DSP sound effects Reverb, Echo, Bass, Treble and Vocal Cut Control for more Karaoke fun.
- Up to 30m line-of-sight operation range. Perfect for Karaoke, DJ music and house parties.
|
|
UHF dual-channel wireless mic system with DSP effects, multiple inputs, and 30 m range—ideal for karaoke, DJs, and home entertainment. |
 |
A4958 NEW
|
|
- Input Level Sensitivity: 100mV/1V
- Output Level Sensitivity: 100mV/1V
- Input Connectors: 3 pin XLR balanced, 2 x RCA
- Output Connectors: 3 pin XLR balanced, 2 x RCA
- Dimensions: 40W x 83D x 50H
- Weight: 0.2 kg
|
|
The Redback A 4958 is a compact, professional-grade pre-amplifier designed for versatility and reliability. It accepts both XLR and RCA inputs and provides a volume-adjustable XLR or RCA output, with RCA signals internally mixed to mono. |
 |
A4423 NEW
|
|
- 1 microphone/ 4 line inputs (mono mixed internally)
- Front 3.5mm music input (overrides rear input 4 input)
- Bluetooth audio connection (overrides input 4 front and rear inputs)
- 2 outputs via XLR/RCA 1V balanced
- Level controls for all inputs
- Separate bass and treble controls on all inputs
- Adjustable input sensitivity on all RCA line inputs
- Phantom power selection on Mic inputs (12V DC)
- Route signals to each output or both outputs
- 24V DC input
- 24V DC battery back up terminals
- 1RU 19” rack mount case
- 10 Year Warranty
- Australian designed & assembled
|
|
The Redback® mixer delivers a flexible and installer-friendly solution with one microphone/line input and three additional line inputs (all internally mixed to mono), plus a front-panel 3.5mm music input and integrated Bluetooth® receiver.
|
 |
CF0887 NEW
|
|
- Standards
- Compliant to EN54-24
- Compliant to BS5839:8
- Electrical
- Rated power: 10 Watts
- Power taps: 10/5/2.5/1.25 Watts
- Impedance: 100V 1k/2k/4k/8k Ohms
- Driver impedance: 8 Ohms
- Frequency Range: (BSEN60268-5) 130Hz - 18,500Hz
- SPL:
- 1m, 1 Watt, Octave, 100 Hz-10 kHz 90dB
- 1m, Full power, Octave, 100 Hz-10 kHz 100dB
- 4m, 1 Watt, 1/3 Octave, 100 Hz-10 kHz 78dB
- 4m, Full power, 1/3 Octave, 100 Hz-10 kHz 85dB
- Dispersion at 1k/2k Hz: 175°/136° Horizontal, 175°/97° Vertical
- Environmental
- IP Rating: 21
- Min/Max ambiment temperature: -10°C to 55°C
- Relative humidity: ≤95%
- Mechanical
- Dimensions: Ø189 x 115.7mm
- Net weight: 1.5kg
- Colour: White, RAL9016
- Material: Steel
- Mounting: Torsion springs
- Cut-out: Ø164mm
- Safety
- Ceramic Block
- Thermal Fuse
- Capacitor for DC line monitoring
|
|
This 130mm (5") 10W ceiling speaker is engineered to EN54-24 and provides high levels of speech intelligibility for EWIS evacuation communication systems. |
 |
A1717B NEW
|
|
- Electrical
- Power supply: 24V DC to 30V DC 300mA (idle/maximum current draw 150mA) tip positive
- Output line: Stereo RCA 500mV nominal
- MP3 sample rate: 44kHz
- SD card size: 256MB to 16GB
- Trigger activation: Closing contact
- Switched output: 24-30VDC out (supply voltage dependent), limited to 120mA current draw
- MP3 Info
- MP3 File Format: Minimum 128kbps, 44.1kHz, 32bit, VBR or CBR, Stereo
- Length/size: Limited by card size (1600mins @ 128kbps, 44kHz on supplied 16GB)
- Bit rate: All standard MP3 rates (128kbps recommended)
- Sample rate: All standard MP3 rates (44kHz recommended)
- Channels: Stereo or mono
|
|
The A 1717B is an MP3 based message player housed in a compact flange mount aluminium enclosure and offers playback of four MP3 tracks. |
 |
A4574B NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
 |
C2188A NEW
|
|
- Redback® “Fast-Fix” speaker utilise a time saving flip lock mounting method. It results in a finish with no visible screw heads or caps. The flip lock tabs slide outwards as the speaker is screwed into the hole, securing the speaker to the ceiling material from the top side. Suitable for use with any 8-33mm ceiling tile, including gyprock, mineral fibre or fixed gyprock ceilings. We recommend using our T 2314A holesaw to cut the speaker hole.
|
|
The C 2188A is a high power PA speaker designed for BGM and paging installations requiring a high output speaker in a small 6.5" driver form factor. It is ideal for BGM and paging. It offers high levels of speech intelligibility, plus excellent frequency response for music playback. |
 |
A4956 |
|
- Boosts low-output stereo RCA audio signals without adding noise
- Input sensitivity selectable: 100mV or 1V
- Front-panel trimpot for volume adjustment
- Includes 24V DC power supply
|
|
The Redback® A 4956 is a compact stereo line level amplifier, ideal for boosting low-level RCA audio signals from devices such as tablets and smartphones when connecting to PA audio systems. |
 |
C0359A NEW
|
|
- USB powered. Easy to power anywhere.
- Provides 48V phantom power to condenser microphones.
- Balanced XLR input and output.
- Additional 3.5mm stereo mixed output.
- Rugged, compact metal enclosure.
- Power and input status LED indicators.
- Ideal for desktop studios, field recording, and content creation.
|
|
A compact and convenient desktop phantom power solution. USB-powered for maximum portability and versatility. Designed for use with condenser microphones requiring 48V phantom power, this unit features balanced XLR input and output connections for seamless integration with professional audio equipment |
 |
C2191A NEW
|
|
- Power Tap: 60/30/15W/7.5W-8ohm
- Power at 8ohm: 60W
- Max. Power: 120W
- SPL (1W/1M): 95dB
- Max SPL@ 1M: 116dB
- Freq. Response: 75-20kHz
- Dispersion Angle: 180°(1000Hz)
- Cutout Size: Dia 245mm
- Product Size: φ285x195mm
- Installation: In ceiling
- Enclosure Material: ABS
- Weight: 3.6kg
- Colour: Black
- Speakers: 6.25" woofer x1, 1.5" tweeter x1
|
|
Designed for foreground & sound reinforcement applications, this speaker employs a high quality 6.5" 2-way polypropylene driver, along with an enclosure which is ported and damped for excellent bass response. |
 |
C0463 NEW
|
|
 Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
This dual 3 pin XLR wallplate has been desinged for DJ/band inputs at function centres and venues. |
 |
P6074B NEW
|
|
|
|
These professional low noise audio cables are exceptional quality and value. |
 |
C2077A NEW
|
|
- IP66 weatherproof rated for outdoor use.
- Aluminium mesh grille for rust free performance.
- Rotary switch power tap selector.
- Suitable for use with 100V line amplifiers.
- High clarity for speech and music reproduction.
- 5 year Redback speaker performance warranty.
|
|
A high performance weatherproof music horn engineered for durability, reliability, and exceptional audio clarity. Designed with a robust and solid structure, this speaker is built to withstand challenging environments while delivering a long service life. |
 |
C2070A NEW
|
|
- Input Power: 3.8W, 7.5W, 15W, 30W and 8Ω
- Rated Impedance: 8Ω
- Sound Pressure Level: 95 ± 3dB (1M/1W)
- Frequency Response: 180Hz - 14kHz
- Speaker Unit: 5”
- Mounting Hole size: 3 x Ø11mm. Distance between holes = 51mm
- Speaker Installation Method: Bracket Installation
- Connection Mode: Two core jacketed wire
- Material: Panel: ABS, Mesh Cover: Aluminium mesh, Bracket: Powdercoated Steel
- Working Temperature: -25°C to 55°C
- StorageTemperature: -40°C to 70°C
- Relative Humidity: ≤95%
- Dimensions: 366 x 172 x 270mm
- Weight: 3kg
|
|
This music horn speaker is designed to meet a wide range of installation needs with ease and flexibility. Built to endure harsh construction environments with its IP66 rating, it ensures reliable performance in demanding locations. |
 |
P0711 NEW
|
|
|
|
3m 3 Pin XLR Male to RCA Male Microphone Cable |
 |
C0912B NEW
|
|
- 5.25" high efficiency woofer driver.
- Mylar dome tweeter.
- IP54 rated sealed enclosure.
- Rust free aluminium grille.
- Industrial strength powdercoated steel bracket.
- Recessed connection to speaker cabling.
|
|
These wall mount music speakers feature exceptional sound quality for both domestic and commercial applications and PA sound reinforcement. |
 |
C0903B NEW
|
|
- 3.5" high efficiency woofer driver.
- Mylar dome tweeter.
- IP54 rated sealed enclosure.
- Rust free aluminium grille.
- Industrial strength powdercoated steel bracket.
- Recessed connection to speaker cabling.
|
|
These wall mount music speakers feature exceptional sound quality for both domestic and commercial applications and PA sound reinforcement. |
Redback