Redback
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
4 Input 3 Tier Priority MixerA5131 |
|
| This four channel mixer features 4 balanced mic inputs and 3 line inputs. Input 1 is a dedicated balanced mic input whilst inputs 2 - 4 can accept either balanced mic or line level. | |
 |
12V-24V DIN Rail Timer With DelayS0082 |
|
| This compact 12-24VDC timer has a multitude of operating modes. | |
 |
12V - 24V DC Adjustable Flasher UnitS0084 |
|
| A handy circuit designed to flash indicator lights on and off at intervals between 200ms and 2 seconds. | |
 |
Temperature Controlled DIN Rail SwitchS0086 |
|
| Designed in house by Altronics R&D, this compact unit has two inputs. Both can be arranged to be either a local sensor or a remote sensor. | |
 |
50 Event 4 Output DIN Rail TimerS0080 |
|
| A versatile timer with standard DIN rail mounting. | |
 |
MP3/SD Random Message PlayerA1745 |
|
| Connects to any RCA input to provide intervalled messages and background music. The included 8GB SD card can be loaded with your choice of background music and custom messages or promotions. Message intervals can be adjusted between 30 seconds and 7.5 minutes. | |
 |
10W 100V EWIS IP66 White Plastic PA Horn S...C2051 |
|
| Exclusive design incorporates a dog leg mounting bracket which eliminates the need to separate the horn from the bracket during installation. A real time & money saver! Traditional horn speaker brackets have to be removed, screwed to the wall surface, and then bolted back onto the horn speaker. | |
 |
10W 100V EWIS IP66 Grey Plastic PA Horn Sp...C2050 |
|
| Exclusive design incorporates a dog leg mounting bracket which eliminates the need to separate the horn from the bracket during installation. A real time & money saver! Traditional horn speaker brackets have to be removed, screwed to the wall surface, and then bolted back onto the horn speaker. | |
 |
Hearing Induction Loop Installed Label Pk5A4209 |
| Pack of 5 indicator labels to inform patrons that there is a hearing aid induction loop installed. 140H x 100W mm | ||
 |
100V Line to Low Level AdapterA4903A |
|
| This small adaptor receives a 100V signal from one amplifier and reduces the level down to either balanced mic level or auxiliary level to feed into the input of a second amplifier. | |
 |
3m 6.35mm Mono Plug to 6.35mm Mono Plug CableP6048A |
| 6.35mm Mono Plug to 6.35mm Mono Plug Cable, 3m. | ||
 |
Line Isolation Transformer 10k ohms to 10k...A2524 |
| Balanced 10kΩ to 10kΩ balanced 3 pin male XLR with earth lift switch. | ||
 |
Line Isolation Transformer 10k ohms to 600...A2522 |
| Balanced 600Ω to 600Ω balanced 3 pin male XLR with earth lift switch. | ||
 |
Line Isolation Transformer 600 ohms to 600...A2519 |
| Balanced 600Ω to 600Ω balanced 3 pin male XLR with earth lift switch. | ||
 |
200mm (8") 15W 100V High Output EWIS PA Dr...C2117A |
|
| Specially engineered to deliver 100dB 1W/1m @ 1kHz for use in PA and fire evacuation systems where a high level of SPL and speech intelligibility is essential. Includes 15W 100V transformer, 4 way wire protect terminal block & 22μF bipolar capacitor. | |
 |
Wireless UHF Handheld Condenser Mic 700 Ch...C8892D |
|
| Wireless handheld 700 channel microphone ideal for use with the Redback 700 channel receiver unit (C 8890D). | |
 |
Wireless UHF Beltpack Transmitter 700 ChannelC8893D |
|
| Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890D). | |
 |
UHF Wireless Microphone System 700 Channel...C8890D |
|
| The Redback 700 channel UHF 520-550MHz radio microphone system is a professional system incorporating true diversity reception. This ensures a consistent and clear microphone signal with minimal dropout and noise interference. | |
 |
Dual 3 Pin XLR Horizontal Microphone Wallp...CB0448 |
|
| Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
Attenuator Volume Control 10W 100V Line - ...A2246 |
|
| Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches | |
 |
Fire Alarm Test Wallplate to suit A4565A o...A4597 |
|
| This remote wallplate interfaces with a building fire evacuation control board to offer simple fire alarm test triggering. | |
 |
4 Channel Public Address (PA) Mixer With B...A4422 |
|
| The Redback® A 4422 4 channel mixer has been designed to meet the requirements of professional public address installations. It is ideally suited for use in shopping centres, gymnasiums, places of worship, court rooms etc. | |
 |
Volume Control 40W 100V Line - Vertical BlackA2266 |
| New models supplied with two facia covers to suit your decor. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches | ||
 |
Mic/Line Pre-Amplifier to Line Level Out C...A4905 |
|
| This line pre-amp will accept either a microphone or auxiliary input and convert it to a balanced high level signal suitable for distribution up to 500M without interference with up to 3V of output level available. Volume controls are provided for both inputs plus a master volume control. The microphone is a balanced XLR input whilst the auxiliary | |
 |
15W Public Address (PA) AmplifierA4017 |
|
| Super compact with surprising performance specifications, intended for smaller PA system applications. Our engineering team based the design around a National TDA1519 monolithic IC achieving virtually "destruction proof" operation under quite severe misuse |
Designed & manufactured in Australia.
Backed by an industry leading 10 Year Manufacturer Warranty.
