Redback
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Phantom Power Supply with Mini XLRC0358 |
| Powered by 1 AA battery, this module provides phantom power for mics equipped with a 3 pin mini XLR plug. A handy 'bass cut' switch is provided, giving the user ability to reduce breath and movement noise. It provides a standard 3 pin XLR output for conne | ||
 |
Phantom Powered Choir MicrophoneC0356 |
|
| This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant | |
 |
Windsock to suit C8914C0348 |
| Spare windsock to suit | ||
 |
Windsock to suit C0361C0347 |
| Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone. | ||
 |
Windsock to suit C0375C0346 |
| Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm | ||
 |
10mm Pencil Microphone WindsockC0345 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
40mm Ball Microphone WindsockC0344 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
27mm Medium Microphone WindsockC0342 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
20mm Pencil Microphone WindsockC0340 |
| Used to negate breath noise and eliminate wind or breath 'pop' | ||
 |
8mm Windsock To Suit C8911AC0338 |
| This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit. | ||
 |
12mm Lapel Microphone WindsockC0337 |
| Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit. | ||
 |
CB Type Microphone Mounting ClipC0336 |
| Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones. | ||
 |
CB Type Balanced Microphone With Bare EndsC0335 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB''''s, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz | ||
 |
5 Pin XLR CB Type Balanced MicrophoneC0334 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
CB Type Microphone With Bare EndsC0333 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
1 In 4 Out 150W Audio TransformerA2370 |
| Designed for installations using several pairs of 8Ω speakers connected to one amplifier. Adjustable impedance protection allows multiple pairs of speakers to be connected without overloading the amplifier. Each pair of speakers is wired back indivi | ||
 |
Attenuator Volume Control 100W 100V Line W...A2339 |
| This controller has been designed to install to a double electrical flush box or wall mounting block. Massive 100 watt capacity available. 11 settings plus off. Fitted with a 24V override relay. 2 Year Warranty | ||
 |
Large Heavy Duty Speaker Stand With Lockin...C0523 |
| Lightweight aluminium construction and collapsible for easy transportation. Anti-sway bars on legs provides stability. Suit 35mm top hats for most popular commercial equipment. Adjusts from approx 1.4 to 3 metres with a payload of 50kg. Now includes | ||
 |
Speaker Grille Fixing Clip Pk 12C0830 |
| Designed for securing the speaker to the grille. Simply push down onto the locating posts. Quick and easy installation. Suits C 0805 and C 0815 Super Slimline speaker grills. Pk 12 | ||
 |
15W 100V Line White Ball Pendant Ceiling S...C1050 |
|
| Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within t | |
 |
15W 8 Ohm Weather Proof IP54 Plastic PA Ho...C2015A |
|
| PA horn speaker suitable for general public address, CB extension speakers, boats and alarms etc. White PVC construction. Swivel bracket included. Flare dimensions: 135mm. | |
 |
200mm (8") 5W 100V Twin Cone EWIS PA Drive...C2112C |
|
| This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility; which is h | |
 |
250mm (10") 120W Woofer PECC SpeakerC3026 ROHS |
|
| This series of loudspeakers feature rubber surrounds and high rigidity, fibre impregnated poly emulsion coated cones (PECC). | |
 |
250mm (10") 60W Woofer Polypropylene SpeakerC3065 ROHS |
| 250mm (10") 60W woofer polypropylene speaker. | ||
 |
Balanced To Unbalanced Converter XLR-RCAA2513 |
| Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out. |
Backed by an industry leading 5 Year Speaker Performance Warranty.
