|
Description |
Downloads |
Specs |
Ordering |
|
 |
A1142 |
|
- Video resolution - Up to 1080p
- HDMI and component video outputs
- Stereo analogue audio output via RCA
- MPEG-2, H.264/AVC SD/HD stream decoding
- 10/100M Base-T RJ45
- Audio MDI/MDIX IGMP multicasting programs
- Support USB 2.0 FAT32
- Easy to install and use
- Light weight & compact
- Includes remote control
|
|
Works in conjunction with the A 1140 for televisions without DLNA streaming capability (typically non-smart TVs). It receives HD content via IP and outputs to your TV via HDMI and component video connections. Compact design allows installation in any environment. Includes power supply. |
 |
S9268 ROHS
|
|
- Connector Type: 1x BNC
- Cable Type: 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
- Max. Transmission Distance: 600m (2000ft.) for the RG6 coaxial cable
- Ethernet Connector: 1x RJ-45 with LEDs on Connector
- Cable Type: Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
- Rate: IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
- Output Voltage: IEEE 802.3af/at PSE@ RJ45 Port
- LED Indicators: Coaxial Data Signal Strength, Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps), Red: BAD (Link speed < 20Mbps) / Off: NO LINK
- Push Button: Reset / Pairing
- Input Operating Voltage: DC 56V / 0.03 - 1.6A
- Power Consumption: 1.5W (w/o power forwarding)
- Operation Temperature: -20°C ~ 60°C
- Humidity: 20% to 85% RH. (non-condensing)
- Storage Temperature: -30°C ~ 80°C
- Dimensions (W×D×H) mm: 38 x 120 x 33
- Weight: 176g
-
-
| Transmission Distance with Power Delivered: COAXIAL Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 5.5W |
-
| 7W |
-
| 9W |
-
| 12W |
-
| 17W |
-
-
-
| Maximum Coax RG6. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 2000m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
-
-
-
| Transmission Distance with Power Delivered: UTP Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 16W |
-
| 18W |
-
| 19.5W |
-
| 20W |
-
| 22W |
-
-
-
| Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 600m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
|
|
A 10/100 ethernet over coax transceiver for sending ethernet only (no power) over
coaxial cabling. Two units are required to form a link. Alternatively, it can be used with S 9267 4 way splitter cable to four S 9268 transceivers. Requires 12V DC from either M 9273A or existing 12V supply using P 6715. Maximum coaxial length 2000m. |
 |
X3099 |
|
- Up to 20m remote controlling distance with the 2.4GHz high frequency signal
- Handheld remote control watch
- Plays beats (can be turned off)
- Dance Mode
- Performs Drifts
- Cool and fast 360-degree rotation on the spot
- Drives fast and reacts rapidly
- LED lights
- Easy to learn how to control
|
|
Perform awesome stunts with this remote control drifter stunt car. You can enjoy the feature of drifting and 360° spinning. A great gift idea for birthday and Christmas presents. |
 |
A3608 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts from a USB type C device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
HDMI wireless sender capable of sending 1080p 60Hz signals from your device to a TV or monitor in another room up to 50m away (line-of-sight). |
 |
T1090 |
|
|
|
Resin core. 60% tin, 40% lead. |
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
H8951 |
|
|
|
An enclosed Raspberry Pi 4 case. Internal fan, vented lid and base ensures excellent cooling for your Pi. Provides access to all ports, except GPIO pins. |
 |
S9901G |
|
- Bullet Camera Specifications
- OV4689 4MP Sensor
- 4MP AHD resolution 2560x1440px
- IR Cut
- 30m IR range
- 2 Infra-Red LEDs
- 0.001 Lux
- Vandal resistant
- IP66 rated for outdoor use
- Analog BNC connection
- 2.8mm f2.0 lens
- Size: 157 x 70 x 66mm.
- DVR Specifications
- H.264 compression
- Simultaneous all channel recording
- Near real time recording 15fps per ch. @ 4MP
- Real time 25fps @ 1080p
- AHD/CVI/TVI/IP camera compatible
- 2 SATA HDD bays (12TB max).
- QR code remote viewing app set up
- USB 2.0 ports for backup
- Audio inputs
- Schedule & motion detect recording
- Alarm triggered recording with 4 alarm inputs and 1 output
- Hexaplex operation: preview, recording, playback, network live viewing, network backup & network playback
- PTZ control (when used with PTZ cameras)
- Composite, VGA & HDMI monitor output
- RJ45 ethernet connection
- Mouse & IR remote control
|
|
A total home or small business solution. - Includes cameras, digital video recorder, connection leads & power supplies. - Easily installs in just a few hours. - Ideal for home or office. - Suitable for DIY - Just add a hard drive and plug it in! Bullet Camera Specifications: - OV4689 4MP Sensor - 4MP AHD resolution 2560x1440px - IR Cut - 30m |
 |
K6075 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Ideal for automotive fault-finding * Set for any current between 315mA and 10A. This resettable Electronic Fuse (eFuse) can be used temporarily in place of a conventional fuse when fault-finding. |
 |
K5804 |
|
- LED voltage: 12-24V DC
- LED current: up to 10A total (ie, 120-240W maximum)
- Number of LED strings: up to 16 per unit
- LED control method: PWM, 200Hz, 255 brightness steps
- LED connectors: 2-pin or 4-pin male headers, 2.54mm pitch
- Audio input: 0.5-2.2V RMS nominal, 180kΩ 100pF input impedance
- Audio output: 1.1V RMS, THD+N 0.004%, signal-to-noise ratio 100dB
- Audio file support: 8-48kHz 16-bit mono or stereo WAV files
- Maximum directory depth: eight levels
- Maximum files per directory: 100
- Control method: universal infrared remote (optional)
- Dimensions: 140 x 110 x 35mm
- Supply voltage: 12-24V DC
- Current drain: ~110mA at 12V
|
|
(SC Oct/Nov '12) Accepts audio input signals and drives coloured LEDs "in tune" with the music. 16 output channels respond to different audio frequency bands and the light brightness is in proportion to the |
 |
S4732
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ± 0.05 V
- Nominal Voltage: 3.63V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 45.0g max
- Cell Dimension: Height : 65.00mm max, Diameter : 18.40mm max
- Operating Temperature: Charge : 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature: 1 month: -20~60°C, 3 months: -20~45°C, 1 year: -20~25°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
 |
Z6451 |
|
- Assembly manual included, plus YouTube tutorials available
- Includes all motors, Arduino board, components, wiring, chassis and tracks
- Bluetooth controllable from a smartphone
- Fully customisable
- Requires 2 x 14500 batteries
|
|
This smart car kit uses the power of Arduino to provide a customisable line tracking and obstacle avoidance robot which can be modified, tweaked and upgraded. It features 4 wheels with acrylic
base. The IR and line tracking sensors keep the robot from bumping
into anything, whilst on board bluetooth allows control from your
smartphone. |
 |
H8967 |
|
|
|
Allows mounting of your Pi to the rear of a monitor using standard 100mm spacing VESA bolt holes. Made from laser cut acrylic plastic. Internal fan for added cooling. |
 |
Z6313 |
|
- UNO R3 compatible board
- I2C1602 LCD
- Plastic packing box
- USB cable
- 3 pin sensor wires x 5
- Light sensor
- Triaxial accelerometer
- Sound Sensor
- LM35 temp sensor
- Smoke sensor
- Temp and humidity sensor
- Water level sensor
- Soil moisture sensor
- XY joystick module
- Ultrasonic sensors
- Mini Breadboard
- Acrylic plate
|
|
This kit includes an LCD readout for visualising data from a variety of included analog sensors. It is supplied with an Arduino UNO compatible board, USB cable, sensor connection leads and 10 breakout boards. The boards included ultrasonic distance detector, moisture sensor, water sensor, joystick, mic and accelerometer. |
 |
P6632A |
|
|
|
Micro HDMI to HDMI Lead, 3m. 4K @ 30Hz Ultra HD Ready. |
 |
Z6300 |
|
- Operating voltage: 3.0V dc
- Field measurement range: -11 to +11 Gauss
- Dimensions: 25.4 x 25.4mm
- Current draw: 0.6mA
- Sampling rate: Up to 2000 samples/second
- Operating temperature: -20°C to 70°C
|
|
A high performance magnetic field sensing module designed for use in solid state navigation & compassing equipment in automotive, marine and aeronautic applications. Output can be fed directly into a microprocessor such as Arduino boards. |
 |
D2327 |
|
- QI Standard.
- Includes USB type A to type C cable
- Inbuilt over-voltage, under-voltage and short circuit protection
|
|
Say goodbye to charging cables! Got two phones with wireless charging. This handy USB charging pad will charge both devices at once. |
 |
C9034A |
|
- Foldable Design
- 10-15m Working Range Distance
- Answer phone calls and talk
- 15 hours listening time
- Adjustable headband
- Silicone Headband for extra comfort
- Includes USB charging cable
- Includes 3.5mm to 3.5mm TRRS jack cable (for wired use)
- Can be used in planes with additional P 0318 airplane adapter.
|
|
These over ear headphones are not only super comfortable but they also deliver up to 18 hours of listening time. |
 |
A1135 |
|
- Converts HD video and audio signals to digital COFDM DVB-T channel
- AVC (MPEG-4) encoding
- 1080P output
- Programmable; channel, network names and LCN
- Full function front LCD for adjustments
- Remote access and control GUI via web browser
- Emergency announcement system control (EAS) input
- Internal fan cooling system for long life span
- 2K/8K carriers
- 1RU rack mountable
- Distributes on any new or existing RF cable
- Built-in IR control allows TV locations to have IR control of AV equipment
|
|
This high definition, HDMI equipped, modulation system allows you to distribute any HD devices (Foxtel, DVD etc) in true HD around the home or business with ease. Each AV input can be assigned its own dedicated TV channel. |
 |
X3035 |
|
|
|
Create your own family world cup with these fun football
robots. 2 players included with pitch (1m x 0.8m), goals, ball and cones. |
 |
P8174 |
|
- 5 x 10A individual power sockets and switches with covers
- Portable and worksite ready
- 2 x USB ports (2.1A total)
- IP54 Rating
- 1 x RCBO switch
- Flexible HD 1.8M Ext. Lead
- Max load: 2400W/10A
|
|
This Ultracharge RCD Protected 10A Powerblock is a must have for trades in the field or at home in the workshop - protects users from appliance faults just like your home RCD switch. |
 |
X0222 |
|
- Tough aluminium die cast casing
- Pen light for spot beam
- LED wide flood beam with two brightness settings
- Red flashing SOS emergency beam
- Magnetic base
- Integral pocket clip
|
|
This compact torch employs a high brightness 3 Watt LED. It’s powered by 3 AA 1.5V batteries. Great for map emergencies or shedding light on areas your interior light doesn’t reach! Perfect for the glove box. The magnetic end means you can hang it under your bonnet. Requires 3 x AA batteries (not included). |
 |
T2192 |
|
|
|
This Professional 60 Piece Driver and Socket Set is ideal for bicycle repair, model disassembly, home assembly, home appliance repair, mechanical maintenance and digital product disassembly. |
 |
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
 |
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
