|
Description |
Downloads |
Specs |
Ordering |
|
 |
S1700 ROHS
|
|
- Colour: Red
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove |
 |
S1706 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
 |
S2682 |
|
- Emergency override feature
- LED status indicator
- Suitable for 12VDC Marine, 4WD, caravan and solar applications
|
|
This dual battery isolator kit allows you to charge two batteries at the same time from your engine alternator. The isolator kit will begin charging the second battery simultaneously when the start battery is sufficiently charged whilst engine is on.
|
 |
N2098 |
|
|
|
Don't be caught under or overcharging your dual battery setup with this handy LCD monitor. |
 |
P0668 |
|
|
|
Includes pre terminated wiring harness for quick hook up. 2.1A max output. |
 |
P5926 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with dual HD9 female VGA connectors. Supplied with two facia covers to suit your decor. |
 |
P5921 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with dual HD9 female VGA connectors. Supplied with two facia covers to suit your decor. |
 |
T2825B NEW
|
|
|
|
Ideal for trimming component legs and cutting and stripping small cables. |
 |
K6075 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Ideal for automotive fault-finding * Set for any current between 315mA and 10A. This resettable Electronic Fuse (eFuse) can be used temporarily in place of a conventional fuse when fault-finding. |
 |
X4106 |
|
- Diameter: 1.3mm
- Length: 3.0m
- Life (hour): 3,000-5,000Hrs
- Operating Voltage: 90-110VAC
- Operating Frequency: 1,800-2,000Hz
- Stretching Resistance: 1KG
- Bending Diameter: > 40mm
- Swing: <30º
|
|
Electroluminescent (EL) wire is commonly used in costumes, decorations and DIY signs. EL wire is a flexible phosphor coated copper wire which glows a particular colour when an alternating current is applied to it. |
 |
X4101 |
|
|
|
This compact controller features two flashing speeds or constant on and is small enough to fit in your pocket. Note that the controller has a small inverter built in and will emit a low volume high pitch sound when switched on (this is typical of almost all EL wire controllers). |
 |
X4102 |
|
|
|
Capping for cut Electroluminescent (EL) wire ends |
 |
X4105 |
|
- Diameter: 1.3mm
- Length: 3.0m
- Life (hour): 3,000-5,000Hrs
- Operating Voltage: 90-110VAC
- Operating Frequency: 1,800-2,000Hz
- Stretching Resistance: 1KG
- Bending Diameter: > 40mm
- Swing: <30º
|
|
Electroluminescent (EL) wire is commonly used in costumes, decorations and DIY signs. EL wire is a flexible phosphor coated copper wire which glows a particular colour when an alternating current is applied to it. |
 |
X4107 |
|
- Diameter: 1.3mm
- Length: 3.0m
- Life (hour): 3,000-5,000Hrs
- Operating Voltage: 90-110VAC
- Operating Frequency: 1,800-2,000Hz
- Stretching Resistance: 1KG
- Bending Diameter: > 40mm
- Swing: <30º
|
|
Electroluminescent (EL) wire is commonly used in costumes, decorations and DIY signs. EL wire is a flexible phosphor coated copper wire which glows a particular colour when an alternating current is applied to it. |
 |
X4108 |
|
- Diameter: 1.3mm
- Length: 3.0m
- Life (hour): 3,000-5,000Hrs
- Operating Voltage: 90-110VAC
- Operating Frequency: 1,800-2,000Hz
- Stretching Resistance: 1KG
- Bending Diameter: > 40mm
- Swing: <30º
|
|
Electroluminescent (EL) wire is commonly used in costumes, decorations and DIY signs. EL wire is a flexible phosphor coated copper wire which glows a particular colour when an alternating current is applied to it. |
 |
K8600 |
|
- V-slot pulley design for reduced noise during operation
- Creality have sold of 800,000 Ender 3's worldwide!
- Built-in motherboard power supply
- Resume printing function
- Simple levelling method with thumbscrews
- 220 x 220 x 250 build volume
- FDM Moulding technology
|
|
The Creality Ender 3 is one of the worlds best selling desktop 3D printers. Creality have developed the Ender 3 with a community of users and contributors to achieve the best possible print performance for its price. |
 |
C5160
|
|
- User Friendly: Simple plug and play interface
- Bluetooth: Stream audio wirelessly from any bluetooth enabled device
- Power Source: Large 39.96Wh internal battery for long play times (6 to 8 hours at 80% volume)
- TWS: True wireless stereo pairing synchronize two speakers together to play the same music
- USB Port & Micro SD Card Slot: Access music stored on memory devices
- FM Radio: Digital FM tuner with auto scan
- Digital Recorder: Record music and spoken word applications directly onto your flash drive
- Wireless Microphone: Included in box, features volume & echo controls
- Mic Inputs: Microphone input with independent volume and echo controls
- Volume Control: Independant master volume, bass & treble controls
- AUX Input: Plug and play smart phones, tablets & MP3 players
- Party Lights: Exciting lighting effect with multiple colours
|
|
This Bluetooth party speaker and wireless mic PA system has been designed for outdoor or indoor entertaining with colour LED lighting for added party atmosphere. |
 |
Z6387 |
|
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Supports OV2640 and OV7670 cameras with built-in flash
- Supports for images WiFI upload
- Supports TF card
- Supports multiple sleep modes
- Embedded Lwip and FreeRTOS
- Supports STA/AP/STA+AP working mode
- Supports Smart Config/AirKiss One-click distribution network
- Supports for serial local upgrade and remote firmware upgrade (FOTA)
- Supports secondary development
|
|
A WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system. |
 |
Z6385A |
|
- Microcontroller: ESP-WROOM-32 module
- USB to Serial Port Chip: CP2102-GMR
- Operating Voltage: DC 5V
- Operating Current: 80mA (average)
- Current Supply: 500mA (Minimum)
- Operating Temperature Range: -40℃ ~ +85℃
- WiFi mode: Station/SoftAP/SoftAP+Station/P2P
- WiFi protocol: 802.11 b/g/n/e/i (802.11n, speed up to 150 Mbps
- WiFi frequency range: 2.4 GHz ~ 2.5 GHz
- Bluetooth protocol: conform to Bluetooth v4.2 BR/EDR and BLE standards
- Dimensions: 55mm*26mm*13mm
- Weight: 9.3g
|
|
This board features a powerful ESP32 dual core microcontroller that has wifi and bluetooth. This allows it to have the ability to be programmed with the Arduino IDE. |
 |
S9268 ROHS
|
|
- Connector Type: 1x BNC
- Cable Type: 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
- Max. Transmission Distance: 600m (2000ft.) for the RG6 coaxial cable
- Ethernet Connector: 1x RJ-45 with LEDs on Connector
- Cable Type: Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
- Rate: IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
- Output Voltage: IEEE 802.3af/at PSE@ RJ45 Port
- LED Indicators: Coaxial Data Signal Strength, Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps), Red: BAD (Link speed < 20Mbps) / Off: NO LINK
- Push Button: Reset / Pairing
- Input Operating Voltage: DC 56V / 0.03 - 1.6A
- Power Consumption: 1.5W (w/o power forwarding)
- Operation Temperature: -20°C ~ 60°C
- Humidity: 20% to 85% RH. (non-condensing)
- Storage Temperature: -30°C ~ 80°C
- Dimensions (W×D×H) mm: 38 x 120 x 33
- Weight: 176g
-
-
| Transmission Distance with Power Delivered: COAXIAL Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 5.5W |
-
| 7W |
-
| 9W |
-
| 12W |
-
| 17W |
-
-
-
| Maximum Coax RG6. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 2000m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
-
-
-
| Transmission Distance with Power Delivered: UTP Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 16W |
-
| 18W |
-
| 19.5W |
-
| 20W |
-
| 22W |
-
-
-
| Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 600m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
|
|
A 10/100 ethernet over coax transceiver for sending ethernet only (no power) over
coaxial cabling. Two units are required to form a link. Alternatively, it can be used with S 9267 4 way splitter cable to four S 9268 transceivers. Requires 12V DC from either M 9273A or existing 12V supply using P 6715. Maximum coaxial length 2000m. |
 |
M8254 |
|
- Up to 20A output
- Fixed 13.8V voltage
- High efficiency switchmode design
- Low noise and ripple <100mV
- 2% voltage regulation
- Short circuit protected output
- Fused input
|
|
A fixed voltage output power supply designed for powering automotive, marine and comms equipment. |
 |
T1462 NEW
|
|
- Sturdy steel base with recesses for dry tip cleaner, rosin flux and cleaning sponge.
- Non-slip rubber feet on industrial powdercoated metal base.
- Solder reel holder in-built.
- 4 segmented arms which stay in place when positioned.
- Rubber tipped spring clamps secure your parts in place while working.
- Includes dry tip cleaner, container of rosin tip flux and cleaning sponge
|
|
This handy bench top helper features 4 flexible arms for keeping items in position when working on them, making it ideal for soldering cables, PCBs and a range of hobbyist uses. Sturdy metal base. |
 |
D0384A NEW
|
|
- Voltage: 5V
- Power: 1.2W
- Size: 169 x 18 x 9mm
|
|
Powered by powerbanks, USB plug ports, laptops and other various USB devices this flexible USB LED Light is perfect for lighting up dark areas so uyou can read/study or more without disturbing anyone by turning on bright main lights. |
 |
Q0594 |
|
- Operating Voltage: 8.0V (min), 50.0V (regular), 120V (max)
- Working Power Consumption (Backlighting): 6.0mA (regular), 8.0mA (max)
- Standby Power Consumption (Backlit Off): 0.5mA (regular), 0.8mA (max)
- Sleep Power Consumption: 50.0µA (regular), 60.0µA (max)
- Voltage Acquisition Accuracy: ±1.0%
- Current Acquisition Accuracy: ±1.0%
- Capacity Acquisition Accuracy: ±1.0%
- Backlight Turn-On Current: 50mA
- The range of capacity values can be set: 0.1Ah (min), 100Ah (regular), 9999.0Ah (max)
- Sampler Current (50A): 0A (min), 50.0A (regular), 75A (max)
- Temperature Range: -10°C (min), 20°C (regular), 50°C (max)
- Weight: 150g
- Monitor Size: 66 x 40 x 14 mm
- Panel Cutout: 53.5 x 37.5. (hole centres 58mm).
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
T1297 |
|
|
|
This arm features a three pivot desk mount arm for easy positioning above your soldering work space. Plus a 100mm adaptor for connection to an external duct. Each includes 2 active carbon filters. |
