|
Description |
Downloads |
Specs |
Ordering |
|
 |
Q0102 |
|
- 2 channel digital oscilloscope + digital multimeter
- Easy to use button and screen layout
- Small enough for single hand operation
- Large, clear 2.8” 64K colour screen 320x240 resolution
- Oscilloscope: 250MSa/s Sample Rate, 40MHz Bandwidth
- USB C recharging with internal 2600mAh lithium battery
- Automatic frequency & amplitude measurement
- 4000 count 10A multimeter
|
|
The ultimate field testing accessory combining an digital storage oscilloscope and digital multimeter. It features 2 channels with real time sampling modes of 125MSa/s per channel (or 250MSa/s when used in single channel mode). 64K colour screen provides a clear view. |
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
Q1053B |
|
- Jumbo display
- Continuity buzzer
- Square wave output
- Transistor tester
- Current measurement
- Voltage measurement
- Diode tester
- Low battery indicator
- Battery included
- Cat II 500V
|
|
This compact, affordable digital multimeter features 19 ranges, square wave output, continuity buzzer, in-built hFE transistor and diode test function. |
 |
Q1058 NEW
|
|
- Large easy to read 20000 count screen
- Folding design stays stable on any surface
- Use it on the bench top or in the field
- Autoranging
- Handy automotive testing functions
- Non-contact AC voltage detection >90V AC
- Data hold, min/max relative modes
- In-built lithium battery pack - no batteries required!
- USB C rechargeable
- Temperature measurement (sensor included)
|
|
This folding autoranging digital multimeter provides in depth functionality for technicians troubleshooting devices and circuits. |
 |
Q1068A NEW
|
|
- Auto ranging with manual override
- Min/max & data hold
- Non contact AC voltage detector
- Frequency/duty cycle measurement
- Temperature measurement
- Backlit LCD screen with bargraph
- Diode test
- Continuity buzzer
- 3 x AAA Batteries included
- Auto power off
- Cat II 1000V, Cat III 600V
- 2 year warranty.
|
|
With in-built AC mains detection. This is one of the best digital multimeters we have evaluated when it comes to build quality and feature set. Its perfect for the serious enthusiast or tradesperson. LCD bargraph. 3.75 digit display. |
 |
Q1070A |
|
- True RMS AC measurement
- 6000 count 3.75 digit LCD
- Non contact AC voltage detection
- Temperature measurement.
- Frequency counter to 60MHz
- Capacitance measurement
- Fused 10A input
- Continuity and diode test
- Auto power off
- Low battery indicator
- 2x AAA battery included
- Data hold mode
- Display backlight
- In built torch
- Cat III 600V
|
|
An affordable true RMS digital multimeter, with in built torch for the enthusiast or instrument technician. |
 |
Q1090 |
|
- 9999 count reverse backlit readout
- True RMS
- Non contact voltage detection
- Auto ranging with push button operation
- Data hold and relative modes
- Analog bar graph display
- Cat III 600V, Cat II 1000V
- Battery & carry pouch included
|
|
Professional digital multimeter with in-built AC mains detection. Featuring a striking easy to read reverse backlit screen and a massive 9999 count readout. Auto ranging with easy push button operation. Great price and build quality. |
 |
Q1255A |
|
- Use on wood, wall board, sheet rock, cardboard, plaster, concrete, mortar and more
- Big backlit LCD display
- Replaceable electrode pins
- 2-in1 Digital LCD readout and analog bargraph
- Simultaneous measurement, display of moisture and temperature readings
- Materials selection measurements
- MAX/MIN/DATA hold
- Auto power off
|
|
Designed to measure moisture in wood and building materials this handheld meter can test levels in sawn timber, plaster, concrete, mortar and many other hard materials. |
 |
Q1278B NEW
|
|
|
|
A handy fast reading digital thermometer suitable for a wide array of uses such as monitoring liquids in laboratory, kitchen or BBQ use - great for roasting meats home brew setups and more! |
 |
X7014 NEW
|
|
- Temperature and humidity measurement for indoor and remote sensor locations.
- Perpetual calendar.
- Comfort indicator.
- Trend arrows.
- Clock with alarm and snooze function.
- 60m open air range for external sensor.
- Great for monitoring cool rooms, patio areas, wine storage and more.
- 433.92MHz wireless.
- Easy to read screen with touch activated backlighting.
|
|
Monitor indoor and outdoor temperatures with this self standing desk monitor (can also be wall mounted). The easy to read screen lights up at a touch providing a quick snapshot of conditions including temperature, humidity and comfort levels. |
 |
X7015 |
|
- Two channel wireless
- Bluetooth range up to 50m
- Food grade stainless steel probes
- 0-300°C range (±1°C)
- Android & iOS app compatible
- Works in Ovens and BBQs
|
|
The EasyBBQ is a dual probe thermometer with Bluetooth connection to your smartphone. Includes 2 probes with stainless steel mesh cables. Android or iOS, plus monitoring on the backlit LCD. 0-300°C range. Requires 2xAAA batteries. |
 |
X7018 NEW
|
|
- Bluetooth wireless probe and base station.
- Easy USB type C recharging with wireless probe charging.
- Base station LCD display with probe & ambient temperature monitoring.
- Wide temperature range from 0°C to 300°C.
- Excellent accuracy ±1*C.
- Easy to clean waterproof (IP67) food safe stainless steel sensor.
- Battery life up to 48 hours.
|
|
This smart wireless Bluetooth meat thermometer provides an easy way to monitor internal meat temperatures while cooking your favourite roast or smoked BBQ recipes. |
 |
X7063 |
|
- Perpetual Calendar up to Year 2099
- Automatic calibration of network time service
- Day of week available to be selected in 8 languages
- Able to be used as an alarm with two daily alarms optional
- Automatic snooze function (OFF or 5~60min)
- Records temperature, humidity, wind speed and rainfall
- Display of ‘feels like temperature’, wind chill temperature, heat index, dew point temperature
- Future weather forecast and forecast temperature function
- Connects directly to Wi-Fi network (2.4Ghz only).
- Adjustable backlight (3 Levels) - when station is plugged in through USB output
|
|
This fantastic wireless Wi-Fi home weather station contains everything you require to monitor live weather conditions at home. The main base station displays at a glance, indoor and outdoor temperature, humidity, barometric pressure, recent rainfall, wind speed and direction. |