|
Description |
Downloads |
Specs |
Ordering |
|
 |
S3255 ROHS
|
|
- Type: SPDT Momentary
- Contact Rating: 250VAC 5A for Resistive load, 250VAC 4A for Inductive load
- Contact Resistance: < 15mR
- Mounting Hole Diameter: 10mm
- Connection: 4.8mm spade
|
|
Type: SPDT Momentary
Contact Rating: 250VAC 5A for Resistive load, 250VAC 4A for Inductive load
Contact Resistance: < 15mR
Mounting Hole Diameter: 10mm |
 |
S4197 ROHS
|
|
- Max Switching Voltage: 250V AC, 110V DC
- Max Switching Current: 16A
- Max VA (Watts): 1800VA (450W)
- Contact Material: Silver Selenium Dioxide
- Coil Resistance: 200Ω
- Max Coil Power: 720mw
- Insulation Resistance: >100MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 13W x 29L x 21H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S4199 ROHS
|
|
- Max Switching Voltage: 250V AC, 110V DC
- Max Switching Current: 16A
- Max VA (Watts): 1800VA (450W)
- Contact Material: Silver Selenium Dioxide
- Coil Resistance: 820Ω
- Max Coil Power: 720mw
- Insulation Resistance: >100MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 13W x 29L x 21H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S1311 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
Includes an actuator that cannot be operated accidentally. To switch on or off the actuator must be pulled out before switching can take place.
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other lea |
 |
S4145 NEW
|
|
- Max AC switching rating: 25A @ 250V
- Max switching power AC: 6250VA
- Contact material: Silver alloy
- Coil resistance: 1405Ω
- Max coil power: 410mW
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric strength (for 1 min): 1000V AC between open contacts, 5000V AC between coil & contact
- Electrical life: 80,000 operations
- Mechanical life: 10 million operations
- Dimensions: ≈29W x 12.7L x 16H mm
- Sealed construction (immersion cleanable).
|
|
25A SPDT relay. PCB mount style. 12V DC coil.
Fully sealed construction makes it ideal for immersion cleaning and large scale manufacturing |
 |
S4144 NEW
|
|
- Max AC switching rating: 25A @ 250V
- Max switching power AC: 6250VA
- Contact material: Silver alloy
- Coil resistance: 351Ω
- Max coil power: 410mW
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric strength (for 1 min): 1000V AC between open contacts, 5000V AC between coil & contact
- Electrical life: 80,000 operations
- Mechanical life: 10 million operations
- Dimensions: ≈29W x 12.7L x 16H mm
- Sealed construction (immersion cleanable).
|
|
25A SPDT relay. PCB mount style. 12V DC coil.
Fully sealed construction makes it ideal for immersion cleaning and large scale manufacturing |
 |
S4245 |
|
- Max AC Rating: 0.5A @ 125V
- Max DC Rating: 2A @ 30V
- Max Switching Power AC: 62VA
- Max Switching Power DC: 60W
- Contact Material: Silver palladium + Gold plated
- Coil Resistance (24V): 2880Ω
- Max Coil Power: 200mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 1600V AC between coil & contact
- Life: 100,000 electrical 0.5A 125V, 10 million mechanical
- Dimensions: 10W x 6.5L x 5.4H mm
|
|
Max AC rating: 0.5A @ 125V
Max DC rating: 2A @ 30V
Max switching power AC: 62VA
Max switching power DC: 60W |
 |
S3500 ROHS
|
|
|
|
Voltage selection switch for mains powered equipment.
Rated at 240V/110V at 10A. |
 |
P8205A |
|
- Rating: 6A max,
- Contact resistance: 50mΩ max
- Insulation resistance: DC 500v 100MΩ min
- Dielectric strength: AC 1500V 1 minute
|
|
A 2 core in-line low voltage DC rocker switch. Suitable for currents up to 6A. Frame and actuator constructed from UL94V-2 nylon.
Terminals are silver plated brass. |
 |
S4335A ROHS
|
|
- Max Switching Voltage: 75V DC
- Max Switching Current: 30A
- Max VA (Watts): 630W
- Contact Material: Silver tin dioxide
- Coil Resistance: 90Ω
- Max Coil Power: 1.68W
- Insulation Resistance: >100MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 500V AC between open contacts
- 750V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: ˜29W x 29L x 26H mm
|
|
Suitable for automotive applications such as alarms, lights, etc. 30A NC rated. |
 |
S0950A |
|
- Rating: 4A 125V AC, 2A 250V AC
- Contact: 20Ωm max
- Insulation: 500V DC 100Ωm min
- Dielectric Strength: 1min 1000V AC
- Operating Temperature: -25°C ~ +85°C
- Electrical Life: 50,000 cycles
- Rating: 4A 125V AC, 2A 250V AC
- Contact: 20M Ohm max
- Insulation: 500V DC 100M Ohm min
- Dielectric Strength: 1min 1000V AC
- Operating Temperature: -25°C ~ +85°C
- Electrical Life: 50,000 cycles
- Switch Type: NO contacts, Screw terminal SPST
- Contact Rating: 2A @ 250V AC, 4A 12V DC
- Panel Thickness: 1-10mm
|
|
Heavy duty vandal resistant switch for indoor/ sheltered outdoor use eg carparks, building entrances. Momentary.
Switch type: Screw terminal SPST
Contact rating: 5A @ 250V AC
Panel Thickness: 1-10mm |
 |
S0949A NEW
|
|
- Rating: 4A 125V AC, 2A 250V AC
- Contact: 20Ωm max
- Insulation: 500V DC 100Ωm min
- Dielectric Strength: 1min 1000V AC
- Operating Temperature: -25°C ~ +85°C
- Electrical Life: 50,000 cycles
- Rating: 4A 125V AC, 2A 250V AC
- Contact: 20M Ohm max
- Insulation: 500V DC 100M Ohm min
- Dielectric Strength: 1min 1000V AC
- Operating Temperature: -25°C ~ +85°C
- Electrical Life: 50,000 cycles
- Switch Type: NO contacts, Screw terminal SPST
- Contact Rating: 2A @ 250V AC, 4A 12V DC
- Panel Thickness: 1-10mm
|
|
Heavy duty vandal resistant switch for indoor/ sheltered outdoor use eg carparks, building entrances. Momentary.
Switch type: Screw terminal SPST
Contact rating: 5A @ 250V AC
Panel Thickness: 1-10mm |
 |
S3270 |
|
- Rating: 15A 125 / 250 VAC
- Terminal: A ( Solder )
- Circuit Position: S.P.D.T.
- Operating Force (OF): max.200 g
- Releasing Force (RF): min. 28 g
- Pre-Travel (PT): max. 2.5mm
- Over-Travel (OT): min. 1.6mm
- Movement Differential (MD): max. 1.2mm
- Operating Position (OP): 18.2+1.2mm
- Dielectric Strength (between contacts): 1,000 VAC ; 50 / 60 HZ for 1 minute
- Dielectric Strength (between terminal and ground): 1,500 VAC ; 50 / 60 HZ for 1 minute
- Mechanically Service Life: 5,000,000 operations / (min.)
- Electrically Service Life: 500,000 operation /(min.)(at rated load)
- Ambient Temperature: 25°C ~ 180°C
|
|
Rating: 15A 125 / 250 VAC
Type: SPDT
Actuator: None |
 |
S3000A ROHS
|
|
|
|
Temperature range: -10C to +60°C Non switching rating: 50V DC @ 100mA Switching rating: 5V DC @ 100mA Contact resistance (Rc): 100m max. Insulation resistance: 100M min @ 250VAC Voltage proof: 250V AC for 1 min. Mech life: (Rc < 150m |
 |
S3001A ROHS
|
|
|
|
Temperature range: -10C to +60°C
Non switching rating: 50V DC @ 100mA
Switching rating: 5V DC @ 100mA
Contact resistance (Rc): 100m max.
Insulation resistance: 100M min @ 250VAC
Voltage proof: 250V AC for 1 min.
Mech life: (Rc < 150m |
 |
S1042 ROHS
|
|
- Switch type: SPST
- Contact rating:10A @ 250V AC
- Mounting hole diameter: 12mm
|
|
With On-Off plate and metal actuator. |
 |
S4175A ROHS
|
|
- Max switching voltage: 240V AC, 110V DC
- Max switching current: 10A
- Max VA (Watts): 1200VA (300W)
- Contact material: Silver Cadmium Oxide
- Coil resistance: 820Ω
- Max coil power: 720mw
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical life: 100,000 operations
- Mechanical life: 10 million operations
- Dimensions: ˜29.1W x 13L x 20.6H mm
|
|
Non-sealed type, suitable for flow soldering |
 |
S3236 |
|
- Switch Type: SPDT (Centre Off Momentary)
- Contact Rating: 10A @ 250V AC
- Panel Cutout: 27.6 x 13.8 mm
- Electrical Life: 20,000 Cycles
- Mechanical Life: 100,000 Cycles
- Contact Resistance: <50mR
- Insulation Resistance: >100MR
- Dielectric Strength: >1500V AC 1 Minute
|
|
Switch Type: SPDT (Centre Off Momentary)
Contact Rating: 10A @ 250V AC
Panel Cutout: 27.6 x 13.8 mm
Electrical Life: 20,000 Cycles
Mechanical Life: 100,000 Cycles
Contact Resistance: <50mR
Insulation Resistance: >100MR
Dielectric Strength: >1500V AC 1 Minute |
 |
S4133 NEW
|
|
- Max Switching Voltage: 250V AC, 220V DC
- Max Switching Current: 0.5A AC, 2A DC (1A DC for UL approved applications)
- Max VA (Watts): 62VA (30W)
- Contact Material: Silver Palladium
- Coil Resistance: 64.3Ω
- Max Coil Power: 140mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 200,000 operations 1A 24V
- Mechanical Life: 10 million operations
- Dimensions: 14W x 9L x 5H mm
|
|
Fully sealed construction. 3V coil.
|
 |
S4158 |
|
- Max AC switching rating: 2A @ 250V
- Max DC switching rating: 2A @ 220V
- Max switching power AC: 62.5VA
- Max switching power DC: 60W
- Contact material: Gold plated nickel
- Coil resistance (5V): 2880Ω
- Nominal coil power: 100mW
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 1600V AC between coil & contact
- Life: 100,000 electrical 1A 24V, 10 million mechanical
- Dimensions: ≈10W x 6.5L x 5.4H mm
- Sealed construction (immersion cleanable)
|
|
Compact 2A SPDT signal relay. 24V DC coil. Fully sealed construction, makes it ideal for immersion cleaning and large scale manufacturing. Low power consumption. Surge withstanding up to 2500V. |
 |
S2015 |
|
|
|
Panel mounting screws to suit S2010/20. |
 |
S1062 |
|
|
|
Momentary SPST pushbutton switch.
|
 |
S1072 |
|
|
|
Momentary SPST pushbutton switch. |
 |
S1391 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1393 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
