|
Description |
Downloads |
Specs |
Ordering |
|
|
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
|
A3127 |
|
- Easy to Install in seconds, no fiddly settings.
- Full 3D and 4Kx2K resolution.
- 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
- 12bit per channel (36bit all channel) deep color.
- Compatible with uncompressed audio such as LPCM
- Compatible with compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD).
|
|
Allows the connection of a single HDMI source to two HDMI displays with no loss of signal quality. Suitable for home theatre, conference centres, sports bars, concerts, board rooms,etc. Multiple splitter units may be daisy chained together. |
|
A3831 |
|
- Compliant with HDMI 2.0b, HDCP 2.2 and DVI
- Supports HDMI Video resolution up to 4K2K@60Hz YUV4:4:4
- Extracts HDMI Audio to multi-channel optical (SPDIF) or L/R analog audio
- Optical audio supports LPCM 2CH, Dolby Digital 2/5.1CH, DTS 2/5.1Ch
- Supports HDMI Hight bit Rate audio pass through
- Audio Sample rates up to 192kHz
- 10bits HDR (high dynamic range) pass through
- Supports CEC bypass
|
|
With the help of this audio extractor you can extract audio signals from any HMDI compliant source to digital optical or analog stereo audio outputs. |
|
A3602 |
|
- Simple plug and play with no software installation
- HDMI loop output
- 1080p @ 60Hz
- Supports point to point or multi-cast to 4 receivers
- Supports uncompressed LPCM
- 48Khz audio
- Includes IR target & emitter
- Up to 100m range
- HDCP 1.3
|
|
Send HDMI signals wirelessly! The best range and reliability from any HDMI sender we've ever evaluated! 1080p @ 60Hz over distances up to 100m line of sight. In-built IR repeater for control of equipment. Supports multicast to up to 3 extra receivers (A 3603). |
|
A3217D |
|
- Transmits up to 70m without signal loss
- One-way IR signal transmission
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Compact design for discrete and flexible installation
- Supports cascading via additional HDMI loop out
- Supports video resolution up to 4k2k@30Hz YUV 4:4:4
- Supports copying EDID from receiver display or loop out display
- Supports Power over Cable (from transmitter to receiver)
|
|
This extender can send HD video/audio signal and IR control up to 70m@1080p, and 40m@4K30 resolution via a single CAT5e/6 cable with zero-delay and uncompressed transmission. The HDMI loop output can be cascaded to the next extender, supporting resolution up to 4K@30Hz. |
|
A3081E |
|
|
|
This compact 4-way HDMI switcher features manual & infra-red remote control for switching up to 4 sources to a single display supporting resolutions up to 4K. |
|
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
|
A3082 |
|
- RS-232 port for remote control.
- Video formats up to 4Kx2K@60Hz.
- Compliant with HDMI 2.0a, DVI 1.0.
- Digital and analog extracted audio output.
- HDCP 2.2 and HDCP 1.4 compliant.
- Support PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH.
- Switches 4 HDMI sources to a single HDMI output.
|
|
This compact 4-way HDMI switcher features manual & infra-red remote control for switching up to 4 sources to a single display supporting resolutions up to 4k 60Hz. |
|
A3134E |
|
- Supports full 3D video format
- Displays an Ultra HD source on up to two Ultra HD displays
- Support high resolution up to 3840X2160@60Hz
- Supports four kinds of EDID handling abilities
- Supports HDCP2.2/1.4 Compliant
- Supports 36 bit deep colour
- Supports LPCM 7.1 Dolby True HD, Dolby Digital Plus and DTS-HD Master Audio
- Bandwidth 18G
- Supports HDR
- Supports online firmware upgrade via Micro USB Port
|
|
Allows the connection of a single HDMI source to multiple HDMI displays with no loss of quality. |
|
A3112 |
|
- 1 input / 2 outputs.
- HDMI 2.0b, HDCP2.2/1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
|
A3148 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. |
|
P7357 |
|
- Convert complete VGA signal into HDMI output.
- Support the exchange between digital signal and analog signal.
- Support HDCP 1.0/1.1/1.2.
- Quick installation, simple operation without setting driver.
- Built-in conversion chip, support hot-swapping.
- VGA video input formats: 640x480, 720x576, 800x600, 1024x768,1280x720, 1280x768, 1280x960,1280x1024,1360x768, 1366x768, 1400x1050, 1440x900, 1600x900, 1600x1200, 1680x1050, 1920x1080.
- HDMI video output formats:480i, 480p, 576i, 576p, 720p, 1080i, 1080p.
|
|
Converts VGA signal to HDMI. Ideal for connecting VGA equipment to modern HDMI monitors & televisions. Supports virtual 7.1ch audio over HDMI or 3.5mm stereo output. |
|
A3135F |
|
- Simultaneously displays an UItra Hi-Def source on up to four UItra HD displays
- Video Resolutions up to UItra HD 4Kx2K (3840x2160p)@60Hz YUV 4:4:4
- Three kinds of EDID handling abilities
- HDCP2.2/1.4 Compliant
- 36 bit Deep Color
- LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio
- Bandwidth 18Gbps
- Supports HDR
- Online firmware upgrade via Micro USB Port
|
|
This is a high performance 1x HDMI input to 4x HDMI output switcher which is powered via a USB port. |
|
P7354A |
|
|
|
This lead adaptor converts a HDMI signal to VGA and splits the audio signal to a 3.5mm stereo jack output. This allows high quality video signals to be transmitted over greater distances. |
|
A3833 |
|
- Allows 4 AV sources to be connected - analog AV, VGA+3.5mm audio, mini DisplayPort, HDMI and USB-C.
- Converts all inputs to HDMI output 4K/2K @ 60Hz.
- Charge device via USB type A or USB type C ports.
- Ethernet by-pass function
- Source auto-detect plus manual switch selection
- Includes power supply.
|
|
Ideal for use in educational or boardroom environments, this handy converter table box provides connection for AV devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
|
A3138A |
|
- HDCP 1.4 compliant
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
|
A3141 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
|
A3139A |
|
- HDCP 1.4 complaint
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
|
A3224 |
|
|
|
An ideal solution for pubs, clubs and venues, this HDMI extender system allows a single HDMI source to be shared across multiple screens located up to 30m away with Cat5e and 50m with Cat6. |
|
A3087C |
|
|
|
Switch between up to 5 AV sources with these professional 4K ready HDMI switchers. Each includes an IR remote control and receiver unit, which allows the switcher to be mounted behind the TV or inside a cabinet. |
|
A3218C |
|
- Compact design for easy and flexible installation
- HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant.
- Supports 18Gbps video bandwidth.
- Single Cat5e/6 cable transmission: 120m @ 4K2K, 150m @ 1080p.
- HDMI loop output on transmitter
- Analogue 3.5mm stereo output on receiver
- Bi-directional IR control (two targets and two emitters included)
- RS232 pass-through
- CEC pass-through
- HDR, HDR10+, Dolby Vision and HLG support
- Supports PoC (Power over Cable)
|
|
This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between transmitter and receiver via a single CAT cable. |
|
A3215A |
|
- 70m Range
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz (75m)
- Supports 4K x 2K @ 60Hz 24bit (50m CAT5e) (60m CAT6)
- Supports 3D passthrough
- Supports LPCM, DTS digital, Dolby Digital, DTS-HD, Dolby True HD
- Supports 3D
- Supports HDbaseT technology
- Bi-direction IR control (wide band, 20-60KHz)
- Bi-direction delivery of power over cable
- Supports EDID call back
- Supports CEC pass through
- Built-in ESD protection system
|
|
Utilises the latest HDBaseT technology to send full HD uncompressed HDMI signals over Cat 5e/6 cable. |
|
A3114 |
|
- 1 input / 4 outputs.
- HDMI 2.0b, HDCP2.2/HDCP1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
|
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
|
A3242 |
|
- Extends HDMI signals over distances up to 60m at 4k@ 60Hz 4:4:4 resolutions.
- HDMI 2.0, HDCP 2.2 HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- Supports one HDMI loop output
- Supports one-way IR pass-through
- Supports HDR function
|
|
Designed to extend HDMI signals over distances up to 60m across economical UTP cabling. |