|
Description |
Downloads |
Specs |
Ordering |
|
|
A6514 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
These compact modules are designed to remotely alter the volume of any low level signal source over serial control. |
|
A4835 |
|
- CSP transfer protocol with Dante compatible converters available (see A 4830/31)
- Local power input (powered at one end of cable run)
- Maximum distance over Cat6 cable: 1200 metres.
|
|
This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances. |
|
A4834 |
|
- Transmits three balanced audio signals or 3 unbalanced line level signals
- CSP transfer protocol with Dante compatible converters available (see A 4830/31)
- Local power input (powered at one end of cable run)
|
|
This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances. |
|
A4832 |
|
- Design Transceiver and Receiver in one Module
- Provides the Power to Connected Receivers
- Sends Left and Right Audio Channels
- Unbalanced Stereo RCA Input from Audio Source
- Balanced 3.5 Jack Audio Input from Mono Source
- Audio Signal Goes to two UTP RJ45 Outputs
- CSP Receiver Compatible with all 2 pair transceiver wallplates
- Two RCA stereo unbalanced outputs
- L (Left) Output Goes to Pair B; R (Right) Goes to Pair C
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
A compact system hub for interfacing input and output wallplates together with existing zone audio amplifiers and audio sources. |
|
A4831 |
|
|
|
Interfaces 2 input and 4 output CSP UTP wallplates with Dante® systems |
|
A4830 |
|
|
|
Interfaces 1 input and 1 output CSP UTP wallplates with Dante® systems. |
|
A4828 |
|
- Stereo RCA Jack Audio Outputs
- Signals from Pair B(L) and Pair C(R).
- Source Loop
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
|
|
This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4827 |
|
- Balanced MIC XLR Output
- Selector switch MIC GAIN
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45 Jacks
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This 3 pin XLR Balanced Output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4826 |
|
- XLR / RCA Audio Output,
- Gain Switch XLR only
- Signals from Pair A(XLR), Pair B(L) and Pair C(R).
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
|
|
This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
|
|
A4825 |
|
- Two Balanced Microphone XLR Inputs
- Switch-Selectable Mic Gain and 48V Phantom Power on Side Panel
- Output Pair Selectors to go to Pair (A, B or C) for Each MIC Input
- Signal and Power Pairs Pass-Through on RJ45 jacks
- Daisy-Chain with a Single-Pair UTP Sender
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This Dual 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4824 |
|
- Balanced MIC XLR Input
- Selector switch MIC GAIN
- RCA Jack Audio Inputs
- XLR Goes to Pair A; L (Left) Goes to Pair B; R (Right) Goes to Pair C.
- Signal and Power Pair Pass-Through on RJ45 jack
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4822 |
|
- RCA Jack Audio Inputs
- L (Left) Output Goes to Pair B; R (Right) Output Goes to Pair C
- Signal and Power Pair Pass-Through on RJ45 jacks
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4821 |
|
- Mini / RCA(MONO) Jacks Audio Inputs
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45 jacks
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This Stereo RCA and 3.5mm Jack Wallaplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4820 |
|
- Balanced MIC XLR Input
- Selector switch MIC GAIN
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45 jacks
- Power can be linked to the removable terminal
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4580 |
|
- Amplifier 100V level or low level balanced line switching
- Selectable pre and post announcement chimes via A4660 (Internal or MP3/SD card based)
- Selectable BGM for each zone
- Accepts up to 8 paging consoles
- Expandable up to 32 zones with additional A 4580
- Paging consoles connect via Cat 5 cable
- Paging consoles can be up to 200m from control box
- Operates from 24V DC plugpack (supplied)
- All inputs/outputs via pluggable terminals
- Suitable for 1 or 2 amplifier systems
- Evac "All Call" input for emergency tones or telephone paging.
- Maximum 500W power handling over 16 zones
- 1U 19” rack mount
|
|
This unit is a very versatile cost effective public address/background music control system which provides audio to up to 16 zones. Backgound music which can be selected to play through any zone is muted when general paging occurs or when an evacuation input overrides the system. |
|
C8844B |
|
- Frequency Range: 500MHz-1GHz
- Voltage Standing Wave Ratio : <2
- Input Impedance: 50 ohms
- Isolation: 12dB
- Loss: <4.5dB
- RF Connector: BNC Female Type
- Dimensions: 40W x 32D x 28Hmm
|
|
This splitter can be used to split a reception signal into two outgoing signals (one input to two output) or combine two reception signals into one outgoing signal (two input to one output). |
|
A4411 |
|
- 2 microphone inputs
- Phantom power on MIc inputs (15V DC)
- 2 line inputs
- Separate tone controls for line and microphones
- Stereo outputs
- 1RU 19” rack mount case
- Master volume on rear panel
- Adjustable line muting
- Front panel mount microphone and line input
- Subwoofer output
- LED VU meter
- VOX active indicator
- Signal Present indicator
- 24V DC input
- 24V DC battery back up terminals
- 10 Year Warranty
- Australian designed & assembled
|
|
This 4 Channel Stereo Mixer has been designed to meet the growing demands of PA systems utilising high power stereo amplifiers, it features 2 balanced microphone and 2 auxiliary inputs. Perfect for aerobics use, bars, bistros, sporting clubs. |
|
C7116 |
|
|
|
A comfortable presenters headset microphone for use with equipment with 3.5mm TS input. Fitted with braided lead for added durability and adjustable boom mic for excellent audio pick up. |
|
A2069 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The Redback® A 2069 Remote Plate allows the Redback® A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. Connections up to 30m away can be made via standard Cat 5 cabling. |
|
A6512 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
These compact modules are designed to remotely alter the volume of any low level signal source feeding any amplifier or mixer remotely, via RS 232 or RS 485 serial control. They will interface with the Redback A 6500 wallplate or any other 3rd party control system. Requires 24V DC power supply. Includes one input with remote volume adjustment via s |
|
A6507 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This compact module includes a seven step 100V line speaker attenuator/volume control which can be remotely adjusted via RS 485 serial control. |
|
H5177 |
|
|
|
Provides internal protection for racks from dust and debris whilst still allowing terminated cables to enter for quick connection when you need it. |
|
A4861 |
|
- 200W into 4 ohms
- Stereo RCA input
- Speaker level input and outputs
- Adjustable phase and crossover frequency
- Volume level control
- 240V AC operation
|
|
A compact dedicated subwoofer amplifier providing up to 200W into 4 ohms. Ideally paired with the A 4860 and C 1065 ceiling subwoofer, but is also suitable for any passive subwoofer. Ideal for integration with commercial systems in fashion boutiques, shopping centres, gymnasiums etc. Front panel provides level control, phase adjustment and crossov |
|
A4860 |
|
- Class-D 2 x 50W amplifier
- Bluetooth 4.2 wireless streaming
- Stereo RCA & 3.5mm jack inputs
- Optical input with high performance DAC
- Automatic signal switching with priority for Bluetooth audio source
- 240V AC operation
|
|
A compact bluetooth stereo amplifier for home and commercial sound systems. Features a high spec Class-D 2x50W RMS amplifier and optical input for connection to digital audio sources. Pairs well with the A4861 200W subwoofer amplifer. |
|
C0357 |
|
- Uses the isolated voltage-boosting technology to effectively prevent the ground signal interference
- The built-in-low pass filter circuit design allows you to fully filter out the interference noise from the external audio equipment
- Soft start function to avoid the impulsive sound when boosting the device
- Uses two sets of balanced power supply, to balance the input and output signals which in turn makes the voltage balanced and stable
|
|
A compact single channel phantom power supply with 3 pin XLR female balanced input and 3 pin XLR male balanced 48V output.
Includes power supply.
Size: 88W x 47H x 92Dmm |