|
Description |
Downloads |
Specs |
Ordering |
|
 |
M8305 |
|
- Input voltage: a.c. 220-240V @ 50Hz
- Output voltage: 0 - 30V d.c.
- Output current max: 5A
- Supply regulation: CV≤1%+10mV
- Load regulation: CV≤1%+5mV
- Ripple: 200mVp-p
- Protection: Current limiting
- Voltmeter: LCD ±1% +2 digits
- Ammeter: LCD ±1% +2 digits
- Temperature: 0ºC-40ºC
- Humidity: Less than RH80%
- Operating time: 8hrs
- Dimensions: 85 x 160 x 205mm
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. |
 |
M8254 |
|
- Up to 20A output
- Fixed 13.8V voltage
- High efficiency switchmode design
- Low noise and ripple <100mV
- 2% voltage regulation
- Short circuit protected output
- Fused input
|
|
A fixed voltage output power supply designed for powering automotive, marine and comms equipment. |
 |
SL4551A
|
|
|
|
This 20Ah LiFEPO4 replacement battery is compatible in size with traditional 20Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SG4563 |
|
- Physical Size
- Length: 197mm
- Width: 165mm
- Height (Total inc. tabs): 170mm
- Weight: 14.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current (5s): 480A (5s)
- Battery Life: 6-9 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
 |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
D0873 |
|
- Automatic Voltage Regulation (Buck and Boost)
- Light-weight compact and elegantly designed
- Intelligent microprocessor control
- Monitoring and shutdown software included
- Fax/modem/LAN surge suppression port
- Overload protection and alarm
- Output short circuit protection
- Start on battery function (cold start)
- USB communication
- Easy user replaceable battery
- Australian/New Zealand approved sockets
- Wall mountable
- Fast charging – 90% in 4 hours
|
|
The Office model is perfect for a home/office solution. It includes three battery backup and surge protected Australian sockets, three dedicated Australian outlets with surge protection and RJ45 phone line surge protection. Provides modified sinew |
 |
S4565 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 14.6kg
- Charging
- 20 Hour Rate (10.5V): 50Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 9MΩ
- Max Discharge Current: 540A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: NB(F4)/IT(F8)
- Container Material: ABS
- Max Charge Current: 15A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 50Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
D0928 |
|
|
|
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! |
 |
N2087 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
S4567 |
|
- General
- Dimensions: 229L x 138W x 213H mm (including tabs)
- Weight: 16.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate. FV (1.75/Cell)
- Internal Resistance (1KHz): 7.5mΩ
- Max. Discharge Current: 660A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 60Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8195B
|
|
- Compact design with 20000mAh internal battery pack
- 2500A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs (5V/3A each)
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
DH0923 |
|
- 1RU 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Horizontal PDU incorporates recessed brackets for cable management
|
|
10 Outlet Horizontal Power Rail (10A IEC C13) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (10A IEC C14) 1RU. |
 |
S4569 |
|
- General
- Dimensions: 350L x 167W x 179H mm (including tabs)
- Weight: 21kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 65Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 650A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 19.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 70Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
DH0924 |
|
- 1RU, 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Horizontal PDU incorporates recessed brackets for cable management
|
|
10 Outlet Horizontal Power Rail (8x 10A IEC C13 & 2x 16A IEC C19) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (16A IEC C20) 1RU. Colour Black. |
 |
D0876
|
|
- Includes 4 x Li-Ion batteries
- Auto-start when plugged in
- Microprocessor control
- Multicolour LED indicator and manual Power Off Switch
- Overload, short circuit, over charge and over discharge protection
- Long backup time
- Additional terminal output for hardwired DC connection
- 2.1mm DC input jack
|
|
The Powershield DC - Mini 36 UPS is an ideal back up solution for routers, modems, security cameras, wifi extenders and VOIP phones. |
 |
DB0891 |
|
|
|
The relay card (PSAS400) provides volt free contact (VFS) relays that change state upon UPS events. This type of card is often used when current loop communications are required for devices such as building management systems (BMS), access control alarm panels or industrial PLCs. User selectable normally open (default) or normally closed contacts. |
 |
DC0891 |
|
|
|
The PSAS400 communication card provides contact closures for remote monitoring of your UPS. To meet different application requirements the PSAS400 card is capable of selecting the status of the dry-contact signal (active close or active open) by setting jumper. |
 |
D0929 |
|
|
|
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! |
 |
SL4557A
|
|
|
|
This 30Ah LiFEPO4 replacement battery is compatible in size with traditional 26Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SG4567 |
|
- Physical Size
- Length: 229mm
- Width: 138mm
- Height (Total inc. tabs): 213mm
- Weight: 17.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 660A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
 |
M8185 |
|
- Nominal Input Power @ 240V AC: 250W
- Nominal Input Current: 1.12A
- Circuit Breaker Current: 2.0A
- Output Voltage: 120V
- Output Current: 2.1A
- Output Power: 250VA
- Dimensions: 133W x 81D x 98H mm
- Weight: 3.2Kg
|
|
M8185 250W model. Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket.
Secondary rating: 120V 2.1A Max |
 |
S4571 |
|
- General
- Dimensions: 259L x 168W x 215L mm (including tabs)
- Weight: 24kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6.6mΩ
- Max. Discharge Current: 900A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 22.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 80Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
D0923 |
|
- 0RU, 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Vertical PDU incorporates three-way mounting brackets for ease of installation
|
|
10 Outlet Vertical Power Rail (10A IEC C13) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (10A IEC C14) 0RU. Colour Black. |
 |
D0874 |
|
- Automatic Voltage Regulation (Buck and Boost)
- Informative Screen Display
- USB Charging Port
- Light-weight compact and elegantly designed
- Intelligent microprocessor control
- Monitoring and shutdown software included
- Overload protection and alarm
- Output short circuit protection
- Start on battery function (cold start)
- USB communication
- Easy user-replaceable battery
- Australian/New Zealand approved sockets
- Wall mountable
|
|
The Powershield SafeGuard 1000VA Uninterruptible Power Supply (UPS) is designed for a home/office solution. |
 |
N2089 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
SG4571 |
|
- Physical Size
- Length: 258mm
- Width: 166mm
- Height (Total inc. tabs): 215mm
- Weight: 24.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current (5s): 900A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 24A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
 |
D0924 |
|
- 0RU, 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Vertical PDU incorporates three-way mounting brackets for ease of installation
|
COMING SOONThis item is arriving soon. |
10 Outlet Vertical Power Rail (10A IEC C20) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (10A IEC C20) 0RU. Colour Black. |
 |
S4574 |
|
- General
- Dimensions: 303L x 169W x 215H mm (including tabs)
- Weight: 27kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 90Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6mΩ
- Max. Discharge Current: 1080A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 90Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4576 |
|
- General
- Dimensions: 330L x 173W x 220H mm (including tabs)
- Weight: 30.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 100Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): <5.5mΩ
- Max. Discharge Current: 950A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 100Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
D0882A |
|
- Line interactive smart AVR
- Three Australian outlets
- Full time power surge / spike protection
- USB communications with sophisticated PowerShield NetGuard software
- Modern, stylish steel enclosure
- Ultra reliable
|
|
Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, |
 |
D0930 |
|
|
|
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! |
 |
M8224 ROHS
|
|
- 3 to 15V @ 25A output
- Regulated variable output voltage or fixed 13.8V (selectable)
- Digital LED meters
- Overload & short circuit protected
- Extremely low ripple & noise
- Excellent regulation
- Highly efficient switchmode design
|
|
Boasting a massive 25A this power supply is ideal for testing 2 way radios, car stereos, high power RF transmitters, inverters and the like. The output voltage can either be fixed at 13.8V or fully variable from 3 - 15V via the front panel control. |
 |
M8200A |
|
- 0 to 30V @ 0 to 3A output
- Regulated variable output voltage
- Auxiliary fixed outputs of 5V & 12V @ 0.5A
- Variable current limiting
- Digital LCD meters
- Overload & short circuit protected
- Floating outputs
- Extremely low ripple & noise
- Linear toroidal design
- Excellent regulation
|
|
With an output of up to 30 volts at 3 amps, this compact bench power supply has been one of our most popular. Both output voltage and current are fully adjustable. In the case of an output short, the power supply goes into overload and shuts down. In addi |
 |
SG4577 |
|
- Physical Size
- Length: 300mm
- Width: 171mm
- Height (Total inc. tabs): 215mm
- Weight: 31kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 110Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤5mΩ
- Max. Discharge Current (5s): 1000A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: IT (F8) /NB (F16)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 33A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
 |
D0942 |
|
- Surge and EMI/RFI filter protection
- 40kA Imax in L-N mode
- 60kA all modes
- 3 stage, 3 mode protection
- LC filter network
- Rugged IP24 enclosure
- 10A IEC C13/14 or 16A IEC C19/20
|
|
Provides secondary protection for critical equipment in locations prone to unreliable electrical supply, such as lightning prone regions. Ideally suited for use in conjunction with UPS systems or as secondary surge protection connected in line at the equipment location. Excess voltage transients are diverted to neutral and earth, limiting the damag |
|
M8205 |
|
- 0 to 30V @ 0 to 5A output
- Regulated variable output voltage
- Auxiliary fixed outputs of 5V & 12V @ 0.5A
- Variable current limiting
- Digital LCD meters
- Overload & short circuit protected
- Floating outputs
- Extremely low ripple & noise
- Linear toroidal design
- Excellent regulation
|
|
Including both variable output voltage and current this bench power supply is an ideal addition to any work bench. Voltage is fully variable from 0 - 30V on the main terminals, plus auxiliary outputs of fixed 12V and 5V at 0.5A are also provided. |
 |
M8187 |
|
- Nominal Input Power @ 240V AC: 500W
- Nominal Input Current: 2.2A
- Circuit Breaker Current: 3.0A
- Output Voltage: 120V
- Output Current: 4.2A
- Output Power: 250VA
- Dimensions: 158W x 100D x 120H mm
- Weight: 6.0Kg
|
|
M8187 500W, Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket.
Secondary Rating: 120V 4.2A |
 |
D0918 |
|
|
|
The PowerShield Environmental Monitoring Device (PSEMD) is a PSSNMPV4 accessory suited for monitoring temperature and humidity. Email alerts and or system shutdown can be initiated if the user defined thresholds are exceeded. It offers two additional dry contact inputs for sensors such as smoke detectors and tamper switches. |
 |
D0883 |
|
- Line interactive smart AVR
- Three Australian outlets
- Full time power surge / spike protection
- USB communications with sophisticated PowerShield NetGuard software
- Modern, stylish steel enclosure
- Ultra reliable
|
|
Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, |
 |
M8310 |
|
- Up to 20A output
- 0-30V adjustable
- High efficiency switchmode design
- Over temperature, voltage and overload protection
- Low ripple & noise
- High RFI stability
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. Offers the flexibility of both wide adjustable voltage and current range. Size: 336W x 87H x 214Dmm. Weight: 2.9kg. |
 |
D0884 |
|
- Offering the best protection in its class, protecting against damaging surges
- Modern, stylish LCD display indicates voltage in/out, amount of load and remaining capacity
- The AVR automatically bucks/boosts unstable fluctuating utility voltages, bringing them within 10% of nominal voltage range and thereby protecting valuable equipment
- Compact design at just 230mm deep
- Intelligent slot for SNMP communications card
- Battery is easily hot swappable and user replaceable
- Designed to run cool without fans
- After an extended power outage the UPS will turn back on and resume equipment functionality once power has returned
- Allows for orderly shutdown without software
- Free, downloadable NetGuard software provides complete power monitoring
- The plugged in UPS will continue to charge internal batteries whether the unit is on or off
- Comes standard with 6 Australian sockets and 2 IEC outlets. Of the 6 Australian outlets, 4 can be used with plug packs
- The UPS can turn on equipment when it is off, simply by connecting equipment and turning the UPS on
- Plug and play on any computer or NAS drive
|
|
This UPS 800VA Defender Rack Mount expands the successful Defender Range by building the popular features into a Rack Mount
UPS. At 230mm deep, this is the perfect UPS for shallow, wall mounted Comms cabinets.
This versatile UPS uses Automatic Voltage Regulation (AVR) to minimise the effects of fluctuations in input voltage, protecting
your valu |
 |
D0919 |
|
- No downtime. Routine maintenance can be performed during normal hours by simply switching the MBS to the “Bypass” position. The load is then fed directly from mains power while maintenance is performed or the UPS is replaced all without interruption.
- PDU(power distribution unit).The MBS has six outlets for distribution to your load.
- Rack mount. It can be mounted both horizontally or vertically (0RU) into a rack.
- Wall mount as an option either vertically or horizontally to a wall.
- Suitable for both line interactive and true online double conversion topologies.
|
|
Power Shield are pleased to be able to offer a comprehensive range of MBS (Maintenance Bypass Switches) suitable for all UPS applications. An inclusion of a MBS is recommended for all critical power applications. |
 |
D0920 |
|
- No downtime. Routine maintenance can be performed during normal hours by simply switching the MBS to the “Bypass” position. The load is then fed directly from mains power while maintenance is performed or the UPS is replaced all without interruption.
- PDU(power distribution unit).The MBS has six outlets for distribution to your load.
- Rackmount. It can be mounted both horizontally or vertically (0RU) into a rack.
- Wallmount as an option either vertically or horizontally to a wall.
- Suitable for both line interactive and true online double conversion topologies.
|
|
Power Shield are pleased to be able to offer a comprehensive range of MBS (Maintenance Bypass Switches) suitable for all UPS applications. An inclusion of a MBS is recommended for all critical power applications. |
 |
SL4566A
|
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SL4566B |
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
S4579 |
|
- General
- Dimensions: 410L x 176W x 227H mm (including tabs)
- Weight: 36kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 125Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current: 1300A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 40A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 126Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
D0891 |
|
- Real-time dynamic graphs of UPS data (voltage, frequency, load level, battery level) .
- Warning notifications via audible alarm, broadcast, mobile messenger, e-mail and SNMP traps
- Historic data log stored in centralized PC database .
- Simple firmware upgrade with one click .
- Password security protection and remote access management.
- Supports optional environmental monitoring detector for temperature, humidity and smoke in external SNMP card.
- 2 year product warranty
|
|
The SNMP (Simple Network Management Protocol) card allows the UPS to be directly connected to the network without the need of a local computer. Furthermore, the SNMP card contains an integrated web server CPU allowing the user to view and control the UPS with any standard internet browser.
|
 |
D0931 |
|
|
|
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! |
 |
D0886 |
|
- Stylish and informative LCD display
- Surge Protection, Best in its Class
- Excellent microprocessor control guarantees high reliability
- Australian outlets for UPS and Surge Protection
- Boost and buck AVR for voltage stabilization
- User replaceable batteries
- Silent Operation (No fans included)
- Auto restart while AC is recovering
- Off-mode charging
- Cold start function
- USB communication with sophisticated NetGuard software
|
|
The Powershield Defender AVR 2000VA Uninterruptible Power Supply (UPS) is designed to support multiple computers and peripherals, networked PC's and point of sale systems. |
 |
M8213 |
|
- 1 to 30V @ 20A output
- Adjustable current limiting
- Regulated variable output voltage or fixed via 3 presets
- Auxiliary fixed output, max 5A
- Digital LED meters
- Overload & short circuit protected
- Extremely low ripple & noise
- Excellent regulation
- Highly efficient switchmode design
|
|
A 1-30V, 20A adjustable current limiting power supply. Both voltage and current settings may be set in fine or coarse modes allowing precise adjustments. Includes three programmable preset outputs. Remote control of settings is also possible. Fixed 5A aux |
