|
Description |
Downloads |
Specs |
Ordering |
|
 |
P8293 |
|
- Fitted with 3 pin mains connectors.
- 25 metre length.
- 3 x 1mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
Heavy duty black plugs and lead. 25m |
 |
A0307A |
|
- Power Rating: 220V - 240VAC
- Power Handling: 2400W
- Max. Load Current: 10AMP
- WARNING: This adapter does NOT convert voltages. For use with 240VAC only.
|
|
This travel adaptor is most commonly used in the following countries: Great Britain, Ireland, Singapore, Hong Kong, Middle East (parts), Asia and Africa |
 |
M8095A |
|
- Rated Voltage: 12V DC
- Rated Current: 10 Amp
- Max Current: 13 Amp
- Cable: 3m 16AWG SPT-2
|
|
Ideal for connecting a portable device to a car battery. 3m length. |
 |
P8277B |
|
- Fitted with 3 pin mains connectors.
- Thicker sheathing - ideal for trades or use in a workspace.
- Piggyback plug - so you don't lose a powerboard socket!
- 10 metre length.
- 3 x 1mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
10m mains extension cable with piggyback 3 pin mains plug. Black mains plugs and lead. |
 |
M1124A |
|
- For 100V line use, connect in series, ie. join pink & yellow. Use purple & brown.
|
|
High power toroidal transformer for audio use. Input and output windings can be reversed. |
 |
M7264 ROHS
|
|
- Primary Voltage: 240V AC
- Total VA Rating: 10VA
- Insulation: Class A (105°C)
- Magnetising Current: <30mA
- Temperature Rise: <65°C
- Regulation: 11%
- Weight: 250g
- PCB Hole Size: 1.2mm
- Secondary Voltage: 12 + 12
- Parallel : 0.83A
- Series: 0.41A
- Standard AS/NZS 61558.2.6 Certified
|
|
Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer. |
 |
P8401C |
|
- Fitted with 3 pin mains connector.
- 2 metre length.
- 3 x 0.75mm2 conductors
- Pre-stripped bare end connection.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
7.5A 3 pin 2m white, bare ends, 6.4mm diameter. Energy Authority approved. |
 |
M5012C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
Low profile design suitable for use inside our 1RU 19" rack enclosures. |
 |
M4915C |
|
- Supplied with 1 rubber washer, bolt and nut.
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
These 30VA transformers will fit inside our 1 Unit 19" rack cases. |
 |
M7012A ROHS
|
|
- Sec. V: 6+6
- Sec. Parallel: 0.5A
- Sec. Series: 0.25A
- Primary voltage: 240V AC
- Total VA rating: 3VA
- Insulation: Class B (130°C)
- Magnetising current: <20mA
- Temperature rise: <65°C
- Regulation: ˜23%
- Weight: ˜95g
- PCB hole size: 0.8mm
- Thermal Fuse: Internal 115°C
- Standard AS/NZS 61558.2.6 Certified
|
|
Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer. |
 |
A0347 |
|
- Outlets work hidden behind equipment and cabinets!
- Outlet's channel is programmable (CH1-4)
- Multiple outlets can share the same channel to be controlled simultaneously
- Saves stand-by power
- Saves from your electricity bill
- Can be used in conjunction with a power board
- Built-in receiver memory stores data for up to 10 years
- Turn individual receivers on or off or a single button to turn all receivers on or off at the same time
|
|
Cut standby power usage around the home and office by switching appliances off at the wall via remote control. Easy inline connection between the GPO and your appliance |
 |
M4615 |
|
|
|
Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for |
 |
P8104 |
|
|
|
Maximise the flexibility of your powerpoint with this double adaptor. |
 |
M8632A |
|
- Input: 12-24V
- Output: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A
- Total Power: 48W. (30W PD, 18W QC3.0)
- Colour: Black
|
|
This car accessory provides USB C PD output @ 30W and QC3.0 USB A type socket @ 18W. 12-24V DC input. |
 |
M8771 |
|
- Screw terminals for inputs and outputs
- Wide operating input voltage 90 – 264VAC, 47 – 63Hz
- Excellent output regulation from no load to full load
- High efficiency
- Overload and short circuit protection
- Inbuilt EMI filter to reduce noise radiation
- EMC approved
|
|
Switchmode power supplies offer several significant advantages over traditional linear transformer power supplies.They are far more efficient than their linear counterparts. As they do not use power or mains transformers the equivalent power supply weighs |
 |
M8971A NEW
|
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super compact regulated power supply. 100V - 240V ac input. Energy authority approved and MEPS approved. Supplied with a fixed 2.1mm dc jack. |
 |
P8264A |
|
|
|
All feature 10A overload circuit breaker and 0.9m lead. |
 |
M5730C |
|
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
Toroidal transformers are becoming increasingly popular due to their improved magnetic properties and also that they can be made to a lower profile than a standard solenoid core transformer, allowing for equipment of similar power to be of a lower profile such as rack mounted devices. |
 |
M5512C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
Efficient toroidal transformer with 12V secondaries. 300VA rated.
|
 |
M5535C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
Efficient toroidal transformer with 35V secondaries. 300VA rated.
|
 |
M5312C |
|
- Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
Note: Must be used with a 3A external AC fuse. |
 |
M4918C |
|
- Supplied with 1 rubber washer, bolt and nut.
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
Low profile design suitable for use inside our 1RU 19"rack enclosures. Potted epoxy centre core for easy mounting. |
 |
M4925C |
|
- Supplied with 1 rubber washer, bolt and nut.
- Lower electrically induced noise demanded by compact equipment.
- High efficiency enabling conservative rating whilst maintaining size advantages.
- The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
|
|
These 30VA transformers will fit inside our 1 Unit 19" rack cases.
|
 |
M8623C NEW
|
|
- Standard USB charging and QC 3.0 charging ports.
- Easy to use - just plug in and turn on your ignition to charge.
- Great for keeping your devices charging whilst in the car.
- Sleek design with light up ring so you can find it at night.
- Battery voltage meter in-built.
|
|
This dual charger allows you to power up to two devices in your car. Max combined current output is 5.5A. |
 |
MA8241 |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC Switchmode Plugpack Supplied with fixed screw on positive 2.1mm DC tip. Compact design with high current regulated output. |
Powertran