Description Ordering
A4820 3 Pin XLR Line/Balanced Input UTP Balun Wallplate

3 Pin XLR Line/Balanced Input UTP Balun Wa...

A4820

This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4822 Stereo RCA Input UTP Balun Wallplate

Stereo RCA Input UTP Balun Wallplate

A4822

This Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4827 3 Pin XLR Line/Balanced Output UTP Balun Wallplate

3 Pin XLR Line/Balanced Output UTP Balun W...

A4827

This 3 pin XLR Balanced Output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4940  3 Pin XLR Cat5 Extender (Transmitter)

3 Pin XLR Cat5 Extender (Transmitter)

A4940

Allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A4942 3 Pin XLR Cat5 Extender (Receiver)

3 Pin XLR Cat5 Extender (Receiver)

A4942

The Redback® A 4942 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output. The output level is DIP switch selectable, and the ouput volume is screwdriver adjusted via the trimpot on the front of the unit.
A4944 RCA to Cat5 Extender (Transmitter)

RCA to Cat5 Extender (Transmitter)

A4944

The Redback® A 4944 provides a convenient way to send line level RCA audio signals over long distances via Cat5/6 cabling. The unit has DIP switch selectable input sensitivities of 100mV and 1V to handle inputs of varying levels.
A4946 RCA to Cat5 Extender (Receiver)

RCA to Cat5 Extender (Receiver)

A4946

The Redback A 4946 receives audio from compatible Redback Cat5e/6 transmitters, converts the signal to line level and outputs to RCA and 3.5mm connectors.
A4950 Paging Microphone Chime Module

Paging Microphone Chime Module

A4950

By adding this module inline with a paging microphone pre and post announcement chimes can be added to the audio signal.
A4948  Line Level Compressor/Limiter

Line Level Compressor/Limiter

A4948

This compact module is designed to go inline with an audio input source like CD/Blu-Ray etc to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal.
A4941  3 Pin XLR Transmitter Wallplate

3 Pin XLR Transmitter Wallplate

A4941

This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A4953  5 Pin XLR Transmitter Wallplate

5 Pin XLR Transmitter Wallplate

A4953

This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A4952  5 Pin XLR Cat5 Extender (Transmitter)

5 Pin XLR Cat5 Extender (Transmitter)

A4952

This handy interface box allows balanced signals to be transmitted over long distances using economical UTP data cabling, and provides easy local zone connection for audio sources.
A4954  5 Pin XLR Cat5 Extender (Receiver)

5 Pin XLR Cat5 Extender (Receiver)

A4954

The Redback® A 4954 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output with PTT connection.
A4905 Mic/Line Pre-Amplifier to Line Level Out Converter

Mic/Line Pre-Amplifier to Line Level Out C...

A4905

This line pre-amp will accept either a microphone or auxiliary input and convert it to a balanced high level signal suitable for distribution up to 500M without interference with up to 3V of output level available. Volume controls are provided for both inputs plus a master volume control. The microphone is a balanced XLR input whilst the auxiliary
A4906 Mic/Line/100V Input to Line +24V Switched Output

Mic/Line/100V Input to Line +24V Switched ...

A4906

The A 4906 is a versatile unit which accepts either a line level signal, balanced microphone signal or 100V input signal. The output signal is a line level signal suitable for feeding into an amplifier.
A4821 Stereo RCA and 3.5mm Jack Input UTP Balun Wallplate

Stereo RCA and 3.5mm Jack Input UTP Balun ...

A4821

This Stereo RCA and 3.5mm Jack Wallaplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4828 Stereo RCA Jack Output UTP Balun Wallplate

Stereo RCA Jack Output UTP Balun Wallplate

A4828

This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4826 3 Pin XLR Balanced & Stereo RCA Output UTP Balun Wallplate

3 Pin XLR Balanced & Stereo RCA Output UTP...

A4826

This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4931 Microphone/Line Pre Amplifier Wallplate

Microphone/Line Pre Amplifier Wallplate

A4931

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4931V Microphone/Line Pre Amplifier Wallplate

Microphone/Line Pre Amplifier Wallplate

A4931V

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4824 3 Pin XLR & Stereo RCA Input UTP Balun Wallplate

3 Pin XLR & Stereo RCA Input UTP Balun Wal...

A4824

This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4932 Balanced Microphone/Line Pre Amplifier

Balanced Microphone/Line Pre Amplifier

A4932

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4928 Single Output Microphone/Line Hub

Single Output Microphone/Line Hub

A4928

A single mic/line output box designed to operate with A 4931 and A 4932 zone connection boxes.
A4832 Local Input/Output Hub Interface Box

Local Input/Output Hub Interface Box

A4832

A compact system hub for interfacing input and output wallplates together with existing zone audio amplifiers and audio sources.
A4835 Active Three Pair Audio Signal Distribution Receiver

Active Three Pair Audio Signal Distributio...

A4835

This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances.

All prices include GST