|
Description |
Downloads |
Specs |
Ordering |
|
 |
S0828 NEW
|
|
- General:
- Button Colour: Green
- Switch rating: 500V 10A
- Mechanical Life: ≥1000,000 cycles (momentary), ≥500,000 cycles (latching)
- Electrical Life: ≥50,000 cycles
- Contact Resistance: ≤200mΩ
- Insulation Resistance: ≥100MΩ (500V DC)
- Power Frequency withstand voltage: 3,000V, RMS 50Hz, 1min
- Operating temperature: -25°C to 55°C (no freezing, keep the air flowing around push button)
- Torque: ~0.6Nm applied to nut
- Operating force: ~10N
- Operating travel: ~5mm
- Front Panel protection degree: IP40
- Terminal type: Thread connection
- Diameter of welded wire: 2 x 1.5mm² Max
- General Tolerance: 0-18mm=±0.25, 18-80mm=±0.52
- Materials:
- Contact: Silver Alloy
- Button: POM
- Body: ABS
- Base: PC
|
COMING SOONThis item is arriving soon. |
Heavy Duty Green 22mm Momentary Push Button Switch activates only while pressed and returns to its original position when released. |
 |
S0827 NEW
|
|
- General:
- Button Colour: Red
- Switch rating: 500V 10A
- Mechanical Life: ≥1000,000 cycles (momentary), ≥500,000 cycles (latching)
- Electrical Life: ≥50,000 cycles
- Contact Resistance: ≤200mΩ
- Insulation Resistance: ≥100MΩ (500V DC)
- Power Frequency withstand voltage: 3,000V, RMS 50Hz, 1min
- Operating temperature: -25°C to 55°C (no freezing, keep the air flowing around push button)
- Torque: ~0.6Nm applied to nut
- Operating force: ~10N
- Operating travel: ~5mm
- Front Panel protection degree: IP40
- Terminal type: Thread connection
- Diameter of welded wire: 2 x 1.5mm² Max
- General Tolerance: 0-18mm=±0.25, 18-80mm=±0.52
- Materials:
- Contact: Silver Alloy
- Button: POM
- Body: ABS
- Base: PC
|
COMING SOONThis item is arriving soon. |
Heavy Duty Red 22mm Momentary Push Button Switch activates only while pressed and returns to its original position when released. |
 |
S0958 NEW
|
|
- Switch type: Screw terminal SPST
- Contact rating: 2A @ 36V DC
- Operation type: Momentary
- Contact resistance: <50mΩ
- Insulation resistance: >1000MΩ
- Dielectric strength: 1500V, RMS 50Hz, 1 min
- Operating temperature: -25°C to 55°C
- Operating force: About 3N.
- Operating travel: About 2.5mm.
- Outer construction: Stainless steel
- LED: 12V dc
- Rating: IP65
- Panel Thickness: 1-8mm
- Cutout diameter: 19mm
|
|
Heavy duty vandal resistant switch for indoor/ sheltered outdoor use eg carparks, building entrances. Momentary action. Red/Blue LED ring. |
 |
S0949A NEW
|
|
- Rating: 4A 125V AC, 2A 250V AC
- Contact: 20Ωm max
- Insulation: 500V DC 100Ωm min
- Dielectric Strength: 1min 1000V AC
- Operating Temperature: -25°C ~ +85°C
- Electrical Life: 50,000 cycles
- Rating: 4A 125V AC, 2A 250V AC
- Contact: 20M Ohm max
- Insulation: 500V DC 100M Ohm min
- Dielectric Strength: 1min 1000V AC
- Operating Temperature: -25°C ~ +85°C
- Electrical Life: 50,000 cycles
- Switch Type: NO contacts, Screw terminal SPST
- Contact Rating: 2A @ 250V AC, 4A 12V DC
- Panel Thickness: 1-10mm
|
|
Heavy duty vandal resistant switch for indoor/ sheltered outdoor use eg carparks, building entrances. Momentary.
Switch type: Screw terminal SPST
Contact rating: 5A @ 250V AC
Panel Thickness: 1-10mm |
 |
S1082A |
|
- Rated Voltage: 125V AC @ 3A
- Rated Current: 250V AC @ 1.5A
- Insulation Resistance: 500V DC 100MΩ (min)
- Contact Resistance: 50MΩ max
- Dielectric Strength: 1000V DC, 1 minute
- Operating Temperature: -20°C to +85°C
- Electrical Life: 10,000 cycles (min)
- Mechanical Life: 50,000 cycles (min)
- Function: Alternate action
- Button Colour: Black
|
|
Low profile red push button switch with solder tail connection. Ideal for panel mounting into projects or rack equipment etc. |
 |
S0919 |
|
- NC/NO contact type, configurable as SPDT
- IP65/IP67 Waterproof Rated
- ROHS Compliant
- Vandal Resistant
- Heavy Duty
- Non Magnetic
- Corrosion Resistant
|
|
This industrial grade 22mm pushbutton switch is ideal for medical, access control, emergency and mining applications. |
 |
S0918 |
|
- NC/NO contact type, configurable as SPDT
- IP65/IP67 Waterproof Rated
- ROHS Compliant
- Vandal Resistant
- Heavy Duty
- Non Magnetic
- Corrosion Resistant
|
|
This industrial grade 22mm pushbutton switch is ideal for medical, access control, emergency and mining applications. |
 |
S1084A |
|
- Contact Resistance: 50m Ohm max
- Insulation Resistance: DC 500V 100M Ohm min
- Dielectric Strength: AC 1000V/1 minute
- Rating: 1.5A 250V
- UL Approval: 1054
- Panel cutout: Ø12.7mm
|
|
Low profile black push button switch with solder tail connection. |
 |
SR1082A |
|
- Rated Voltage: 125V AC @ 3A
- Rated Current: 250V AC @ 1.5A
- Insulation Resistance: 500V DC 100MΩ (min)
- Contact Resistance: 50MΩ max
- Dielectric Strength: 1000V DC, 1 minute
- Operating Temperature: -20°C to +85°C
- Electrical Life: 10,000 cycles (min)
- Mechanical Life: 50,000 cycles (min)
- Function: Alternate action
- Button Colour: Red
|
|
Low profile red push button switch with solder tail connection. Ideal for panel mounting into projects or rack equipment etc. |
 |
S1170A |
|
- Switch Type: SPST Momentary
- Contact Rating: 50mA @ 12V DC
- Contact Resistance:< 100m Ohm
- LED Rating
- Current: 15mA
- Voltage: 1.7-2.8V
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm
LED Rating
Current: 15mA
Voltage: 1.7-2.8V |
|
S1173A |
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
- LED Rating
- Current: 30mA
- Voltage:3.5-4.0V
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm
LED Rating
Current: 30mA
Voltage:3.5-4.0V |
|
S1171A |
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
- LED Rating
- Current: 30mA
- Voltage: 1.7-2.8V
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm
LED Rating
Current: 30mA
Voltage: 1.7-2.8V |
 |
S1150A |
|
- Contact Form: DPDT
- Double Pole Double Throw
- Switch Function: ON-ON
- Ratings: 4A @ 125VAC, 2A @ 250VAC
- 6-pin solder lug
- Metal pushbutton switch (0.40"/10mm diameter)
- Electrical life: 20,000 make and break cycles
- Body color: Black
- Stomp switch, foot switch
|
|
Switch Type: DPDT Alternate
Contact Rating: 4A @ 250V AC
Contact Resistance: <80m&Omega
Mounting Hole Diam.: 12mm |
 |
S0957 |
|
- Contact rating: 0.5A @ 220V AC
- Contact resistance: <50mΩ
- LED: 12V DC
- Insulation resistance: >1000MΩ
- Dielectric strength: 1500V AC
- Panel Thickness: 1-10mm
|
|
Heavy duty vandal resistant switch for indoor/ sheltered outdoor use eg carparks, building entrances. Features an addressable RGB LED for virtually any colour illumination! 19mm mounting hole.
|
 |
S1085 |
|
- Colour: Green
- Type: SPST
- Action: Momentary
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
Switch type:Solder Tail SPDT
Contact rating:1.5A @ 250V AC
Contact resistance:< 50m Ohm |
 |
S1060C |
|
- Circuit: A: (ON)-OFF
- Rating: 1A 125V ac / 0.5A 250V ac
- Contact resistance: 30mΩ Max
- Insulation resistance: 500V DC 100mΩ Min
- Dielectric Strength: 1000V AC 1 Minute
- Electrical Life: 5000 cycle
- Mechanical Life: 10,000 cycle
- Terminal Material: Copper, Alloy, (Silver or Gold Plated)
- Push Force: >0.3kg
- Soldering: 240° for 3 seconds
- Mounting hole diameter: 7.3mm
|
|
Type : SPST Momentary
Rating: 1A 125V ac / 0.5A 250V ac
Contact resistance: 2.5V dc 1A 20mΩ or less
Insulation resistance: 500V dc 100MΩ or more
Voltage breakdown: 1000V ac 1minute
Mounting hole diameter: 7mm
|
 |
S3270 |
|
- Rating: 15A 125 / 250 VAC
- Terminal: A ( Solder )
- Circuit Position: S.P.D.T.
- Operating Force (OF): max.200 g
- Releasing Force (RF): min. 28 g
- Pre-Travel (PT): max. 2.5mm
- Over-Travel (OT): min. 1.6mm
- Movement Differential (MD): max. 1.2mm
- Operating Position (OP): 18.2+1.2mm
- Dielectric Strength (between contacts): 1,000 VAC ; 50 / 60 HZ for 1 minute
- Dielectric Strength (between terminal and ground): 1,500 VAC ; 50 / 60 HZ for 1 minute
- Mechanically Service Life: 5,000,000 operations / (min.)
- Electrically Service Life: 500,000 operation /(min.)(at rated load)
- Ambient Temperature: 25°C ~ 180°C
|
|
Rating: 15A 125 / 250 VAC
Type: SPDT
Actuator: None |
 |
S0950A |
|
- Rating: 4A 125V AC, 2A 250V AC
- Contact: 20Ωm max
- Insulation: 500V DC 100Ωm min
- Dielectric Strength: 1min 1000V AC
- Operating Temperature: -25°C ~ +85°C
- Electrical Life: 50,000 cycles
- Rating: 4A 125V AC, 2A 250V AC
- Contact: 20M Ohm max
- Insulation: 500V DC 100M Ohm min
- Dielectric Strength: 1min 1000V AC
- Operating Temperature: -25°C ~ +85°C
- Electrical Life: 50,000 cycles
- Switch Type: NO contacts, Screw terminal SPST
- Contact Rating: 2A @ 250V AC, 4A 12V DC
- Panel Thickness: 1-10mm
|
|
Heavy duty vandal resistant switch for indoor/ sheltered outdoor use eg carparks, building entrances. Momentary.
Switch type: Screw terminal SPST
Contact rating: 5A @ 250V AC
Panel Thickness: 1-10mm |
 |
S1072 |
|
|
|
Momentary SPST pushbutton switch. |
 |
S1062 |
|
|
|
Momentary SPST pushbutton switch.
|
|
S1152A |
|
- Contact Form: DPDT
- Switch Function: ON-ON
- Maximum Current Rating (A): 4
- Type: Push Button
- Voltage Rating (AC): 250
- Actuator Type: Round Button
- Color: Black
- Color - Actuator/Cap: Chrome
- Number of Positions: 2
- Mounting Style: Panel
- Termination Style: Solderable Lug
- Number of Pins: 6
- Length (inch): 0.89
- Width (inch): 0.71
- Depth (inch): 0.75
- Height (inch): 0.46
- Actuator Length (inch): 0.4
- Lead Spacing A (inch): 0.35
- Lead Spacing B (inch): 0.35
- Features: Stomp Switch
- Maximum Contact Resistance: 50 mΩ
- Minimum Insulation Resistance: 100 MΩ
- Dielectric Strength: 1000 VAC
- Electrical Life: 20,000 operations
- Maximum Current Rating: 4
|
|
The sturdy little stomp switches that you find on guitar effects pedals.
Switch Type: DPDT momentary
Contact rating: 4A @ 250V AC
Contact resistance: <80m&Omega
Mounting hole diam.: 12mm |
 |
S0941 |
|
- Panel Thickness: 10mm
- LED Colours: Red/Green
- LED Operating Voltage: 12VDC
- Max Switch Rating: 500mA/24VDC
- Electrical Life: 50 million cycles at full load
- Contact Resistance: ≤20MΩ
- Insulation Resistance: ≥10MΩ 600VDC
- Operating Temperature: -25°C to +55°C
- IK Class: IK10
- IP Class: IP67
- Body Material: Stainless steel
- Cable Materials: UL1430 22AWG
|
|
Touch activated dual colour (red, green) LED switch for ticket machines, kiosks, access control etc. IP67 rated. 30cm fly lead connection. A touch action. |
 |
S0940 |
|
- Panel Thickness: 10mm
- LED Colours: Red/Green
- LED Operating Voltage: 12VDC
- Max Switch Rating: 500mA/24VDC
- Electrical Life: 50 million cycles at full load
- Contact Resistance: ≤20MΩ
- Insulation Resistance: ≥10MΩ 600VDC
- Operating Temperature: -25°C to +55°C
- IK Class: IK10
- IP Class: IP67
- Body Material: Stainless steel
- Cable Materials: UL1430 22AWG
|
|
Touch activated dual colour (red, green) LED switch for ticket machines, kiosks, access control etc. IP67 rated. 30cm fly lead connection. Momentary touch action. |
 |
Z6359 |
|
|
|
Ideal for access control projects, these adhesive backed membrane keypads can be interfaced to an Arduino digital inputs. 85mm flexible flat connection lead. |
 |
S3266 |
|
- Switch Type: SPDT Momentary
- Contact Rating: 3A @ 250VAC resistive load
- Contact Resistance: <15mR
- Actuator Length: None
|
|
A handy miniature limit microswitch with 37mm actuator. This size is commonly found in joystick designs in industrial and amusement equipment. Ideal for replacement or new mechatronic designs. |
