|
Description |
Downloads |
Specs |
Ordering |
|
 |
A3217D |
|
- Transmits up to 70m without signal loss
- One-way IR signal transmission
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Compact design for discrete and flexible installation
- Supports cascading via additional HDMI loop out
- Supports video resolution up to 4k2k@30Hz YUV 4:4:4
- Supports copying EDID from receiver display or loop out display
- Supports Power over Cable (from transmitter to receiver)
|
|
This extender can send HD video/audio signal and IR control up to 70m@1080p, and 40m@4K30 resolution via a single CAT5e/6 cable with zero-delay and uncompressed transmission. The HDMI loop output can be cascaded to the next extender, supporting resolution up to 4K@30Hz. |
 |
A3215A |
|
- 70m Range
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz (75m)
- Supports 4K x 2K @ 60Hz 24bit (50m CAT5e) (60m CAT6)
- Supports 3D passthrough
- Supports LPCM, DTS digital, Dolby Digital, DTS-HD, Dolby True HD
- Supports 3D
- Supports HDbaseT technology
- Bi-direction IR control (wide band, 20-60KHz)
- Bi-direction delivery of power over cable
- Supports EDID call back
- Supports CEC pass through
- Built-in ESD protection system
|
|
Utilises the latest HDBaseT technology to send full HD uncompressed HDMI signals over Cat 5e/6 cable. |
 |
A3244B |
|
- HDBaseT single UTP
- Simultaneous HDMI, IR & RS-232 signal transmission
- HDCP compliant
- HDMI ARC and local audio extraction
- Transmitter or receiver unit can be powered via PoC
- Bi-directional IR transmission
- Supports 4K @ 60Hz 4:4:4 (70m max) when used with Cat6A/7
- Supports PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD.
|
|
This HDBaseT UTP balun allows transmission of 4K HDMI signals up to 70m with full audio-return-channel (ARC) support and RS-232 control signals. |
 |
A3242 |
|
- Extends HDMI signals over distances up to 60m at 4k@ 60Hz 4:4:4 resolutions.
- HDMI 2.0, HDCP 2.2 HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- Supports one HDMI loop output
- Supports one-way IR pass-through
- Supports HDR function
|
|
Designed to extend HDMI signals over distances up to 60m across economical UTP cabling. |
 |
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
 |
A3831 |
|
- Compliant with HDMI 2.0b, HDCP 2.2 and DVI
- Supports HDMI Video resolution up to 4K2K@60Hz YUV4:4:4
- Extracts HDMI Audio to multi-channel optical (SPDIF) or L/R analog audio
- Optical audio supports LPCM 2CH, Dolby Digital 2/5.1CH, DTS 2/5.1Ch
- Supports HDMI Hight bit Rate audio pass through
- Audio Sample rates up to 192kHz
- 10bits HDR (high dynamic range) pass through
- Supports CEC bypass
|
|
With the help of this audio extractor you can extract audio signals from any HMDI compliant source to digital optical or analog stereo audio outputs. |
 |
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
 |
A3528A |
|
- Incorporates HDBaseT Technology
- Support resolution up to Ultra HD 4Kx2K
- Transmission distance reaches up to 70 meters under the video format of 1080P and 4K up to 40 meters
- POC( Receiver powered by Transmitter)
- Support 3D
- HDCP2.2/1.4 compliant
- CEC pass through
- Support wide-band Bi-directional IR (38KHZ to 56KHZ)
- IR extension from transmitter to receiver or from receiver to transmitter
- Phoenix RS232 Port for firmware update or RS232 control signal transmission
|
|
Cat6 balun receivers are sold individually, each includes IR receiver, IR transmitter and power supply. Size: 482W x 250D x 44Hmm. |
 |
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
 |
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
 |
A3141 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3218C |
|
- Compact design for easy and flexible installation
- HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant.
- Supports 18Gbps video bandwidth.
- Single Cat5e/6 cable transmission: 120m @ 4K2K, 150m @ 1080p.
- HDMI loop output on transmitter
- Analogue 3.5mm stereo output on receiver
- Bi-directional IR control (two targets and two emitters included)
- RS232 pass-through
- CEC pass-through
- HDR, HDR10+, Dolby Vision and HLG support
- Supports PoC (Power over Cable)
|
|
This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between transmitter and receiver via a single CAT cable. |
 |
A3139A |
|
- HDCP 1.4 complaint
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
 |
A3138A |
|
- HDCP 1.4 compliant
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
 |
A3149 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. |
 |
A3148 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. |
 |
P7354A |
|
|
|
This lead adaptor converts a HDMI signal to VGA and splits the audio signal to a 3.5mm stereo jack output. This allows high quality video signals to be transmitted over greater distances. |
 |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3832 |
|
|
|
Ideal for use in educational or boardroom environments, this handy converter box provides connection for devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
 |
A3224 |
|
|
|
An ideal solution for pubs, clubs and venues, this HDMI extender system allows a single HDMI source to be shared across multiple screens located up to 30m away with Cat5e and 50m with Cat6. |
 |
A3606 NEW
|
|
- General
- System Video Resolution: 4K60; 4K30; 4K24; 1080P60/50/30/24;1080i60/50; 720P/60/50/30 480P
- Audio: Stereo, 44.1KHz
- Wireless standard: IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R
- Latency: About 100ms latency
- HDMI Version: HDMI 2.0 with HDCP2.2
- Platform: supported Any devices that support HDMI Port
- Distance: ≈150m in the clear line of sight
- Receiver
- Interface: HDMI out x1; USB x 2; Type C x1
- LED: Blue LED x 1
- Power supply: DC5V/2.1A
- Power Consumption: About 5W
- Dimension: 154*77.5*21mm
- Weight: 330g
|
|
An additional receiver unit for the Dynalink A3605 4K wireless HDMI sender system. |
 |
A3226 |
|
|
|
Receiver for use with the A 3224 HDMI Extender Kit and the A 3225 HDMI Extender Tranceiver. For multiple screens daisy chained from a single signal source use up to 6 tranceivers with a receiver at the very end. |
 |
A3456 |
|
|
|
This spare dongle suits A 3455 which is a wireless presentation kit which allows users to share content from their laptops or mobile devices on a large meeting room screen in a very simple way- without cables and additional configuration, just by clicking the button of the USB-button connected to a laptop,or using the app for iPhone or Android. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.
