|
Description |
Downloads |
Specs |
Ordering |
|
 |
A4250A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- Phantom power
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation. |
 |
A4567C |
|
- This unit is designed for “loop in loop out” serial wiring to loudspeakers with a 100kΩ terminating resistor at the end of the line. Star wiring or tee offs are prohibited. Each loudspeaker requires a series connected 22µf bipolar capacitor for correct operation. A delay of 10 seconds is provided before registering a fault to minimise false alarms.
|
|
Specifically designed to monitor the condition of 100V line speaker systems in emergency paging and fire evacuation installations. Many large commercial installations have speaker circuits in excess of 250W. |
 |
A4245A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- 3.5mm Jack Input (Front Mounted)
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation. |
 |
A4037 |
|
- 3 balanced microphone inputs
- Phantom power on mic inputs
- 3 line inputs
- 19” rack mount kit included
- VOX muting
- Tape output RCA sockets
- Bass and treble tone controls
- 100V line output
- 240V AC or 24V DC operation
- Built in short circuit protection
- 10 year warranty
- Optional evac module available
- Optional remote volume module
- Australian designed & assembled
|
|
Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 40W RMS respectively. |
 |
A4411 |
|
- 2 microphone inputs
- Phantom power on MIc inputs (15V DC)
- 2 line inputs
- Separate tone controls for line and microphones
- Stereo outputs
- 1RU 19” rack mount case
- Master volume on rear panel
- Adjustable line muting
- Front panel mount microphone and line input
- Subwoofer output
- LED VU meter
- VOX active indicator
- Signal Present indicator
- 24V DC input
- 24V DC battery back up terminals
- 10 Year Warranty
- Australian designed & assembled
|
|
This 4 Channel Stereo Mixer has been designed to meet the growing demands of PA systems utilising high power stereo amplifiers, it features 2 balanced microphone and 2 auxiliary inputs. Perfect for aerobics use, bars, bistros, sporting clubs. |
 |
A4370 |
|
- Robust design incorporating latest Mosfet technology
- Very Low noise and distortion
- 70V, 100V and 4-16Ω outputs
- 240V AC or 24V DC operation
- 24V DC @ 1 Amp output for external devices
- Multi stage thermally cued fan cooling
- Output Peak Limited
- Thermal Overload protected
- Signal Presence Indicators
- Fault Indicators
- Power Status Indicators
- Rack Mountable (suits 19 inch racks)
|
|
This range of booster amplifiers are ideal for installations requiring high power zone amplifiers. Simply choose a power rating according to the wattage required for each zone. |
 |
A4565A |
|
- Tones conform to AS 1670.4
- Standard 1U 19” rack mount case
- Interfaces with Fire Indicator Boards
- Remote operation of Alert, Evac, Chime, Fire Test, Fire Alarm & Cancel tones
- MP3 based tone playback (with backup hard coded Alert, Evac and Bell tones)
- 24V DC operation
- Auto/Manual/Isolate keyswitch
- Key switch to 003 standard
- Local operation of Alert, Evac and PA
- MP3 based Voice Over messages for Alert and Evac cycles
- Microphone socket for PA use
- Provision for BGM (back ground music)
- Provision for Auxiliary input with front volume control
- Bell chime facility
- Switched 24V DC output for override relays on volume controls
- Switched 24V DC output for strobe operation for Alert mode
- Switched 24V DC output for strobe operation for Evac mode
- Switched 24VDC output for bell mode
- On-board timer for automatic Alert to Evac switchover, adjustable from 30secs to 7.5min in 30 second increments
- Externally operated inputs are activated by switching to ground
- Auxiliary level output
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This easy to operate building alert & evacuation controller controller is designed around industry standard building requirements. When connected to a paging system amplifier, occupants can be alerted and/or evacuated in the event of an emergency eg: fire, gas leak, bomb scare, earthquake. |
 |
A4435A |
|
- Four input channels
- SD card message player for audio announcements
- Individual level, bass and treble control on all inputs
- 3.5mm music input
- Adjustable input sensitivity on mic or line
- 24V DC battery back up terminals
- Four sets of closing contacts for message triggering
- 24V DC switched output
- Message active indicators
- Adjustable Vox sensitivity
|
|
This unique mixer features four input channels which are user selectable for either balanced mic, line or auxiliary use. It incorporates a four channel SD card based message player making it an excellent choice for retail, supermarkets and hardware stores. |
 |
A4255A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- 3.5mm Jack Input (Front Mounted)
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation. |
 |
C8846B |
|
|
|
Ideal for use with multiple radio microphone systems. This antenna divider eliminates the need for a set of antennas for each system. It utilises a single set of antennas which splits into separate outputs allowing up to four receiver units to operate. T |
 |
A4043 |
|
- 3 balanced microphone inputs
- Phantom power on mic inputs
- 3 line inputs
- 19” rack mount kit included
- VOX muting
- Tape output RCA sockets
- Bass and treble tone controls
- 100V line output
- 240V AC or 24V DC operation
- Built in short circuit protection
- 10 year warranty
- Optional evac module available
- Optional remote volume module
- Australian designed & assembled
|
|
Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 100W RMS respectively. |
 |
A4210 |
|
- Designed to meet AS60118.4-2007
- Coverage up to 180m2
- XLR line & mic inputs
- Aux input via stereo RCA
- EWIS signal connection (RCA)
- Short circuit proof
- Compressor for added speech intelligibility
- Adjustable VOX sensitivity
- Compatible with single loop designs
|
|
Hearing induction loop amplifiers are installed to greatly enhance the listening experience of people using hearing aids. They are commonly installed in public areas which are generally noisy, making it difficult for hearing impaired users to hear clearly. |
 |
A4424 NEW
|
|
- Six mic / line input channels.
- Two outputs via XLR/RCA 1V balanced.
- Level, bass and treble control on all inputs.
- Adjustable input sensitivity.
- Phantom power selection on each input.
- Route signals to each output or both outputs.
- Includes power supply
- 1RU 19” rack mount case.
- Australian designed & assembled
|
|
New to the Redback mixer stable, this model incorporates six inputs which can be routed to 1 of 2 outputs or both as the installation requires. Inputs can be configured for either RCA line level signals or 3 pin XLR balanced mic signals. |
 |
A4260B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
This compact Class-D design amplifier offers multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
 |
A4432 |
|
- Four Mic/ Line Input channels (Inputs 1-4)
- Four switched RCA AUX Input channels
- Remote AUX source selection, volume and Local input source volume control via optional A 4433 and A 4931 wall plates
- PTT Input and 24V PTT output (limited to 120mA) on inputs 1-4
- Micro SD card based Alert/Evac/Chime/Voice-over module (In built)
- Individual level, bass and treble control on all inputs
- 3.5mm music input overrides AUX 4
- Three levels of priority
- Adjustable Vox sensitivity on inputs 1-4
- Adjustable input sensitivity 1V/100mV on inputs 1-4 and Aux inputs 1-4
- Phantom Power on inputs 1-4
- Tape out (Dual RCA)
- Balanced Output (XLR male)
- Five sets of closing contacts for message triggering (Alert/Evac/Ch1/Ch2/Cancel)
- 24V DC switched output (Limited to 120mA)
- MP3 active indicator
- Signal Present indicator
- LED VU Meter
- 24V DC operation (Plugpack Supplied)
- 24V DC battery back up terminals
|
|
Designed in conjunction with pro-sound contractors, the A 4432 is a stand alone mixer which provides a flexible way to bring multiple audio sources together. It combines many of the best features from our popular mixer and signal processing range into one compact unit. |
 |
A4370A |
|
- Robust design incorporating latest Mosfet technology
- Very Low noise and distortion
- 70V, 100V and 4-16Ω outputs
- 240V AC or 24V DC operation
- 24V DC @ 1 Amp output for external devices
- Multi stage thermally cued fan cooling
- Output Peak Limited
- Thermal Overload protected
- Signal Presence Indicators
- Fault Indicators
- Power Status Indicators
- Rack Mountable (suits 19 inch racks)
|
|
This range of booster amplifiers are ideal for installations requiring high power zone amplifiers. Simply choose a power rating according to the wattage required for each zone. |
 |
A4047 |
|
- 3 balanced microphone inputs
- Phantom power on mic inputs
- 3 line inputs
- 19” rack mount kit included
- VOX muting
- Tape output RCA sockets
- Bass and treble tone controls
- 100V line output
- 240V AC or 24V DC operation
- Built in short circuit protection
- 10 year warranty
- Optional evac module available
- Optional remote volume module
- Australian designed & assembled
|
|
Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 100W RMS respectively. |
 |
A4506 |
|
- With mains power failure the connected batteries are relay switched to the load via two 50A terminals. A sensing circuit disconnects the load when the minimum permissible discharge voltage is reached, thus preventing permanent battery damage. This charger is specifically designed for use on sealed lead acid batteries, gel technology batteries and standard vented lead acid batteries.
|
|
Ideal for PA systems & other applications requiring battery backup. This all new model incorporates a highly efficient, intelligent, multi stage switchmode battery charger ensuring optimum battery charging and performance. |
 |
A4595A |
|
- 1U 19” rack mount
- Interfaces with A 4565 for a complete fire/evac & lockdown system
- 24V DC operation (plugpack included)
- Period bell, standby, lock down and all clear controls with remote contacts
- Connects to lockdown wallplate and/or paging console via Cat5e UTP cabling
- MP3 SD card tone & audio announcement playback
- RCA audio output
- Up to 4 paging consoles and 16 remote wallplates per system
- Flip up switch covers to prevent accidental triggering
- Adjustable rear mounted level control
- Switched 24V outputs for all conditions (all clear, standby, lockdown, bell, pre-bell, emergency & common contacts).
|
|
This lockdown controller complements the A 4565 Alert/Evac controller and is primarily aimed at schools which require a lockdown warning facility. |
 |
A4427 |
|
- Eight input channels
- Micro SD card message player for audio announcements
- Individual level, bass and treble control on all inputs
- Six levels of VOX priority
- Adjustable VOX sensitivity
- 3.5mm music input
- Adjustable input sensitivity on line inputs
- 24V DC battery back up terminals
- In built Alert/Evac/Chime functionality
- 24V DC output
- MP3 active indicator
- LED VU meter
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This unique Redback PA mixer features four input channels which are user selectable for either balanced mic, line or auxiliary use. In addition it incorporates a four channel SD card based message player making it an excellent choice for retail, supermarkets, hardware stores and more. |
 |
A4500C |
|
- MP3 bell, prebell & music timing outputs.
- Emergency tones conform to AS 1670.4.
- Random play for prebell and music.
- Easy PC based timing event setup.
- Remote triggering of alert, evac and bell.
- Provision for connection to A4660 touchscreen paging console.
- Switched 24VDC out for bell, alert/evac.
- Pluggable screw terminal connections.
- Auxiliary level output.
- Battery backup of current time.
- 24V DC operation.
- Standard 1U 19” rack mount case.
- Suitable for any amp with an aux input.
- 10 Year Warranty
- Australian Designed and Manufactured
- Includes Power Supply
|
|
A weekly timer and evacuation controller all housed in a convenient 1RU rack mount chassis. A total of 200 “event” switching times are available through the timing functions. Each event can be set to turn on from 1 sec up to 24 hours. |
 |
A4505C |
|
- MP3 for bell, prebell & music timing output.
- Emergency tones conform to AS 1670.4
- Random play of MP3 for prebell and music triggers.
- Easy PC based timing event setup
- Local & remote triggering of lockdown, fire and bell.
- Provision for connection to A4660 touchscreen paging console.
- MP3 voice over message (available in the lockdown and the fire cycle)
- Switched 24VDC outputs
- Pluggable screw terminal connections
- Auxiliary level output
- Battery backup of current time
- 24V DC operation
- 1RU 19” rack case
- Suitable for any amplifier with aux input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
A timed audio announcement, lockdown and fire alarm controller all housed in a convenient 1RU rack mount chassis. For scheduled announcements a total of 200 “event” switching times are available through the timing functions. |
 |
A4262B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
These compact Class-D design amplifiers offer multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
 |
A4512 |
|
- Mains failure battery backup operation: With mains power failure the connected batteries are relay switched to the load via two 50A terminals. A sensing circuit disconnects the load when the minimum permissible discharge voltage is reached, thus preventing permanent battery damage. This charger is specifically designed for use on sealed lead acid batteries, gel technology batteries and standard vented lead acid batteries.
|
|
Ideal for PA systems & other applications requiring battery backup. This all new model incorporates a highly efficient, intelligent, multi stage switchmode battery charger ensuring optimum battery charging and performance. |
 |
A4212 |
|
- Designed to meet AS60118.4-2007
- Coverage up to 650m2
- XLR line & mic inputs
- Aux input via stereo RCA
- EWIS signal connection (RCA)
- Short circuit proof
- Compressor for added speech intelligibility
- Adjustable VOX sensitivity
- Compatible with single loop designs
|
|
Hearing induction loop amplifiers are installed to greatly enhance the listening experience of people using hearing aids. They are commonly installed in public areas which are generally noisy, making it difficult for hearing impaired users to hear clearly. |
