|
Description |
Downloads |
Specs |
Ordering |
|
 |
A0306A |
|
- Power Rating: 220V - 240VAC
- Power Handling: 2400W
- Max. Load Current: 10AMP
- Pin diameter: 4.76mm per pin
- WARNING: This adapter does NOT convert voltages. For use with 240VAC only.
|
|
On your next holiday don't forget a travel power adaptor to keep you devices fully charged while you're away. This Bali power adapter also works across most parts of Europe. Australia / NZ (Type I) to EU (Type F) plug conversion. |
 |
M8936D |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC Switchmode Plugpack Supplied with fixed 2.1mm DC tip (tip positive). Compact design with high current regulated output. Energy authority approved. MEPS approved.
12VDC @ 2A. |
 |
M8561 |
|
- Output short-circuit protection (Auto reset when short circuit is removed)
- Output current-limiting and over-voltage protection
- Separate standby battery circuit with fast changeover
- Standby battery voltage shutdown below 10.8V DC
|
|
A complete 12V dc power supply and battery backup in one compact enclosure. When operating from 240V, it automatically charges the internal battery (available separately) and powers the connected load (max 5A). When mains fails, the load switches and is p |
 |
M8937D |
|
- Australian Standards Compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC Switchmode Plugpack Supplied with fixed 2.1mm DC positive tip. Compact design with high current regulated output. Energy authority approved. MEPS approved.
12VDC @ 3A.
|
 |
D0882A |
|
- Line interactive smart AVR
- Three Australian outlets
- Full time power surge / spike protection
- USB communications with sophisticated PowerShield NetGuard software
- Modern, stylish steel enclosure
- Ultra reliable
|
|
Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, |
 |
D0881 |
|
- Stylish and informative LCD display
- Surge Protection, Best in it’s Class
- Excellent microprocessor control guarantees high reliability
- Australian outlet sockets for UPS and Surge protection
- Buck and boost AVR for voltage stabilization
- User replaceable batteries
- Silent operation (no fans included)
- Auto restart when AC returns
- Off-mode charging
- Cold start function
- USB communication with sophisticated NetGuard® software
- Free download software included
|
|
The Powershield Defender PSD 650VA Uninterruptible Power Supply (UPS) is designed to support multiple computers and peripherals, networked PC''s and point of sale systems. |
 |
D0883 |
|
- Line interactive smart AVR
- Three Australian outlets
- Full time power surge / spike protection
- USB communications with sophisticated PowerShield NetGuard software
- Modern, stylish steel enclosure
- Ultra reliable
|
|
Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, |
 |
M8932B |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
12V DC Switchmode Plugpack Supplied with fixed positive to tip 2.1mm DC jack. Compact design with high current regulated output. Energy authority approved. MEPS approved.
12VDC @ 1A. |
 |
N2097 |
|
- Suitable for any 12VDC system up to 8A direct current loads like motors, lamps, heaters & LEDs (with current limiting resistors).
- Electric motor can start smoothly at low speed with this PWM controller.
- Replaces the resistor circuit for control of the speed of DC motors
- Frequently used as light dimmer.
- Energy efficient with zero to full speed control
- Light dimmer capable of smooth control
- The whole PCBA is potted in epoxy and with the special splash proof tuning potentiometer making this controller weather proof.
|
|
This 12VDC 8A pulse width modulator (PWM) is a general purpose DC output power control. |
 |
SL4576B
|
|
|
|
This 12.8V 100Ah lithium battery (LiFePO4) is compatible in size with traditional 90-100Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
D0873 |
|
- Automatic Voltage Regulation (Buck and Boost)
- Light-weight compact and elegantly designed
- Intelligent microprocessor control
- Monitoring and shutdown software included
- Fax/modem/LAN surge suppression port
- Overload protection and alarm
- Output short circuit protection
- Start on battery function (cold start)
- USB communication
- Easy user replaceable battery
- Australian/New Zealand approved sockets
- Wall mountable
- Fast charging – 90% in 4 hours
|
|
The Office model is perfect for a home/office solution. It includes three battery backup and surge protected Australian sockets, three dedicated Australian outlets with surge protection and RJ45 phone line surge protection. Provides modified sinew |
 |
M6014 |
|
|
|
Typically used for garden lighting and water feature pumps these power supplies are ideal for outdoor use. |
 |
SL4578A
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-130Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
N2099A |
|
- Receive notification alerts when Bluetooth in range
- Check vehicle cranking system automatically while engine starting
- Check charging system (alternator)
- List driving periods
- Alert smartphone if abnormalities occur.
- Short-circuit and reverse connection protection
- Data stored in battery monitor for up to 31 days
- Automatic synchronisation when in Bluetooth range
- Compatible with all 12V vehicle batteries
- Graphical historical data display
- Engine starting detection automatically
- Free BM2 app for both iOS and Android devices
|
|
This handy 12V bluetooth battery monitor allows you to get live performance stats on your phone. Provides live feedback on your vehicle or auxiliary battery, plus long term stats. Suits lead acid batteries. |
 |
S4532 |
|
- General
- Dimensions: 90L x 70W x 107H mm (including tabs)
- Weight: 1.45kg
- Capacity
- 20 Hour Rate (10.5V): 4.5Ah
- 10 hour Rate (10.5V): 4.2Ah
- 1 Hour Rate (9.60V): 2.95Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 45MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 1.35A
- Maximum Discharging Current: 67.5A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 4.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8821 |
|
- Output
- Output voltage: +5.1V DC
- Minimum load current: 0A
- Nominal load current: 3.0A
- Maximum power: 15.3W
- Load regulation: ±5%
- Line regulation: ±2%
- Ripple & noise: 120mVp-p
- Rise time: 100ms maximum to regulation limits for DC outputs
- Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
- Protection: Short circuit protection, Overcurrent protection, Over temperature protection
- Efficiency: 81% minimum (output current from 100%, 75%, 50%, 25%), 72% minimum at 10% load
- Output cable: 1.5m 18AWG
- Output connector: USB Type-C
- Input
- Voltage range: 100-240Vac (rated), 96-264Vac (operating)
- Frequency: 50/60Hz ±3Hz
- Current: 0.5A maximum
- Power consumption (no load): 0.075W maximum
- Inrush current: No damage shall occur and the input fuse shall not blow
|
|
Official Raspberry Pi power supply, ideal for use with the Raspberry Pi 4 Model B board. This power supply comes with USB Type C lead and AU mains plug. It supports up to 3A of current to power devices through four USB ports on the board. |
 |
A0289A |
|
- Charges 2 cells at once
- Charging / Fully charged indication
- Powered by any USB charger at home or in the car
- Compatible with Lithium-Ion, NiMH and NiCd cells
- Over-charge protection
- Short-circuit protection
- Reverse polarity protection
- 0V activation function to charge the Li-ion cells with Protection PCB design
|
|
This compact USB battery charger gives you the flexibility of charging both lithium ion (Li-Ion), nickel metal hydride (Ni-MH) and nickel cadmium (Ni-Cd) cells. USB charging allows it to be connected to any mains or car charger. |
 |
S4538 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28MΩ
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life, maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
M8305 |
|
- Input voltage: a.c. 220-240V @ 50Hz
- Output voltage: 0 - 30V d.c.
- Output current max: 5A
- Supply regulation: CV≤1%+10mV
- Load regulation: CV≤1%+5mV
- Ripple: 200mVp-p
- Protection: Current limiting
- Voltmeter: LCD ±1% +2 digits
- Ammeter: LCD ±1% +2 digits
- Temperature: 0ºC-40ºC
- Humidity: Less than RH80%
- Operating time: 8hrs
- Dimensions: 85 x 160 x 205mm
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. |
 |
M8181 |
|
- Input: 230V AC 50Hz.
- Output: 110V AC 75W.
- Cable: 1.8m.
- Continuous usage must be below 65VA on M8181
|
|
Converts 220V-240V to 110V for using US appliances on Australian mains voltages. Fitted with US mains socket. |
 |
N2089 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- PV solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
S4975
|
|
|
|
Long life lithium battery in 14250 half AA size. |
 |
S4543 |
|
- General
- 151L x 65W x 100H mm (including tabs)
- Weight: 2.65kg
- Charging
- 20 Hour Rate (10.5V): 9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 18MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.52A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4540 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.2kg
- Capacity
- 20 Hour Rate (10.5V): 7.2Ah
- 10 Hour Rate (10.5V): 6.7Ah
- 1 Hour Rate (9.6V): 4.67Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: <25mΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.16A
- Maximum Discharging Current: 108A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 7.2Ah sealed lead acid (SLA) battery is perhaps the most common size SLA battery in use. |
 |
SL4541A
|
|
|
|
This 8Ah LiFEPO4 replacement battery is compatible in size with traditional 7Ah/9Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
This product poses a serious health hazard if swallowed. If swallowed you must go to emergency immediately.