Search Results 141 products found 129 deleted products found
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Unbalanced to Balanced Converter RCA-XLRA2514 |
| Unbalanced 10K Ohm 2 x RCA to balanced 600 Ohm 3 pin male XLR with level control. -10dB max signal gain. | ||
 |
IP68 24V AC 3A Appliance TransformerM6014 |
| Typically used for garden lighting and water feature pumps these power supplies are ideal for outdoor use. | ||
 |
75W 220V-240V To 110V Stepdown TransformerM8181 |
|
| Converts 220V-240V to 110V for using US appliances on Australian mains voltages. Fitted with US mains socket. | |
 |
100W 240V to 120V Stepdown TransformerM8182 |
|
| Converts 240V to 120V for using US appliances on Australian mains voltages. Fitted with US mains socket. | |
 |
Balanced To Unbalanced Converter XLR-RCAA2513 |
| Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out. | ||
 |
IP68 12V AC 6A Appliance TransformerM6010 |
| Typically used for garden lighting and water feature pumps these power supplies are ideal for outdoor use. | ||
 |
12-30V / 240V 100VA EI Core TransformerM2170L |
|
| Powertran EI-Core 240V AC mains transformer with 6A dual multi tapped secondary configuration. Two sets of 0V, 12V and 15V secondaries are available at a maximum current of 6A (max current when secondaries connected in parallel) . Primary is fitted with 200mm flyleads. Secondary taps have solder tags. Fully electrical authority approved for AS/NZS | |
 |
3k Ohm / 3k Ohm Audio Coupling TransformerM0222 ROHS |
|
| Impedance: 3k&Omega CT / 3k&Omega Freq. Response: 300Hz-3kHz ±2.5dB Rated Power: 450mW Primary DC Resistance: 220&Omega ±10% Secondary DC Resistance: 270&Omega ±10% Fly Lead Length: 7mm | |
 |
8 Ohm to 1.25W - 15W 100V Line PA Speaker ...M1115 |
|
| 15 W 100V line speaker transformer with multi-tapped primary and secondary to suit 8 Ohm speakers. | |
 |
Unbalanced Stereo Line Isolation Transform...A2517 |
| Unbalanced stereo 2 x RCA to unbalanced stereo 2 x RCA. | ||
 |
HDR-60-24 60W 24VDC 2.5A DIN Rail Switchmo...M8395 |
|
| The Mean Well HDR-60-24 is a 60W DIN rail mountable power supply with a DC output voltage of 24V. The design is ideal for lower current DC power applications in a standardised DIN rail housing to suit mounting to asymmetrical “G” or 35mm top hat type DIN rails. | |
 |
EDR-120-12 120W 12VDC 10A DIN Rail Switchm...M8406A |
|
| The Mean Well EDR-120-12 provides 12VDC 10A output with a rated power output of 120W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
240V 15-30V 1A TransformerM6672L |
|
| Primary fitted with 200mm fly leads. Secondary taps have solder tags. | |
 |
600 Ohm / 10k Ohm Shielded Microphone Tran...M0705 ROHS |
|
| Used for coupling audio circuits. These transformers help prevent earth loops, hum etc. Essential coupling device where DC isolating is required. Housed in a mu-metal can to guard against stray hum fields. | |
 |
20W 100V Line PA EI Core Speaker / Audio T...M1120 ROHS |
|
| High quality, high performance 100V line audio transformers. All models are wound on professional grade grain orientated steel core for extended frequency response. Designed for use in high grade constant voltage 100V and 70V PA Systems. | |
 |
24V / 240V 5A EI Core TransformerM2190L |
|
| Primary fitted with 200mm fly leads. Secondary taps have solder tags. | |
|
EDR-120-48 120W 48VDC 2.5A DIN Rail Switch...M8414A |
|
| The Mean Well EDR-120-48 provides 48VDC 2.5A output with a rated power output of 120W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. Suitable for mounting to DIN rail T | |
 |
6-15V / 240V 1A EI Core TransformerM2155L |
|
| Primary fitted with 200mm fly leads. Secondary taps have solder tags. | |
 |
EDR-120-24 120W 24VDC 5A DIN Rail Power Su...M8410A |
|
| The Mean Well EDR-120-24 provides 24VDC 5A output with a rated power output of 120W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
8 Ohm to 0.33W - 5W 100V Line Speaker / Au...M1112 |
|
| 5 Watt 100V line speaker transformers with tapped primary, and secondary to suit 8 Ohm speakers. | |
 |
40W 100V Line PA EI Core Audio TransformerM1130 |
|
| High quality, high performance 100V line audio transformers. All models are wound on professional grade grain orientated steel core for extended frequency response. Designed for use in high grade constant voltage 100V and 70V PA Systems. 40 Watt 100V l | |
 |
1k Ohm / 8 Ohm Audio Coupling TransformerM0216 ROHS |
| Impedance: 1k&Omega CT / 8&Omega Freq. Response: 300Hz-3kHz ±2.5dB Rated Power: 450mW Primary DC Resistance: 100&Omega ±10% Secondary DC Resistance: 0.7&Omega ±10% Fly Lead Length: 10mm | ||
 |
10-60W 100V Line PA EI Core TransformerM1136A |
|
| High quality, high performance 100V line audio transformers. All models are wound on professional grade grain orientated steel core for extended frequency response. Designed for use in high grade constant voltage 100V and 70V PA Systems. 60 Watt 100V | |
|
600 Ohm / 600 Ohm Shielded Bridging Transf...M0707 ROHS |
|
| Used for coupling audio circuits. These transformers help prevent earth loops, hum etc. Essential coupling device where DC isolating is required. Housed in a mu-metal can to guard against stray hum fields. | |
 |
24V / 240V 150mA Centre Tapped EI Core Tra...M2854L |
|
| Primary and secondary fitted with 200mm fly leads. | |
 |
HDR-60-12 60W 12VDC 4.5A DIN Rail Switchmo...M8394 |
|
| The Mean Well HDR-60-12 is a 60W DIN rail mountable power supply with a DC output voltage of 12V. The design is ideal for lower current DC power applications in a standardised DIN rail housing to suit mounting to asymmetrical “G” or 35mm top hat type DIN rails. | |
 |
Line Isolation Transformer 10k ohms to 10k...A2524 |
| Balanced 10kΩ to 10kΩ balanced 3 pin male XLR with earth lift switch. | ||
 |
Line Isolation Transformer 10k ohms to 600...A2522 |
| Balanced 600Ω to 600Ω balanced 3 pin male XLR with earth lift switch. | ||
 |
Line Isolation Transformer 600 ohms to 600...A2519 |
| Balanced 600Ω to 600Ω balanced 3 pin male XLR with earth lift switch. | ||
 |
Hum and Noise Eliminating Audio CouplerC9555A |
|
| A very handy 2 channel inline transformer coupler enabling the interconnection of audio modules without introducing hum and buzz, etc. Typical uses are: * Car sound - Enabling connection from receiver/player to power amplifier * Home theatre / Hi- | |
 |
6 Zone 300W Speaker Switcher With Volume C...A2387A NEW |
|
| The A2387A is a high-power, dual-source, autoformer based speaker selector. Dual source operation makes two different amplifiers/receivers drive selected speakers simultaneously. | |
 |
HDR-30-24 36W 24VDC 1.5A DIN Rail Switchmo...M8393 |
|
| The Mean Well HDR-30-24 is a 36W DIN rail mountable power supply with an output voltage of 24V. Th ultra-slim design is ideal for lower current DC power applications in a standardised DIN rail housing to suit mounting to asymmetrical “G” or 35mm top hat type DIN rails. Each unit measures only 90mm high and is supplied in 35mm and 52.5mm widths. | |
 |
500W 240V to 120V Stepdown TransformerM8187 |
|
| M8187 500W, Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket. Secondary Rating: 120V 4.2A | |
 |
Hum and Noise Eliminating Audio Coupler 3.5mmC9556 |
|
| A very handy 2 channel inline transformer coupler enabling the interconnection of audio modules without introducing hum and buzz, etc. uses stereo 3.5mm connections | |
 |
HDR-30-12 24W 12VDC 2A DIN Rail Switchmode...M8392 |
|
| The Mean Well HDR-30-12 is a 24W DIN rail mountable power supply with an output voltage of 12V. The ultra-slim design is ideal for lower current DC power applications in a standardised DIN rail housing to suit mounting to asymmetrical “G” or 35mm top hat type DIN rails. Each unit measures only 90mm high and is supplied in 35mm and 52.5mm widths. | |
 |
30W 12V/2.5A Mini Screw Terminal Power SupplyM8420 |
|
| The Mean Well IRM-30-12ST 30W miniature AC-DC power supply is ready to be soldered onto the PCB boards of various kinds of electronic instruments or industrial automation equipment. | |
 |
10k Ohm / 10k Ohm Bridging Input TransformerM0710 ROHS |
| Impedance: 10kΩ / 10kΩ Freq. Response: 20Hz - 30kHz Insertion Loss: -0.5dB Weight: 63g | ||
 |
1 In 4 Out 150W Audio TransformerA2370 |
| Designed for installations using several pairs of 8Ω speakers connected to one amplifier. Adjustable impedance protection allows multiple pairs of speakers to be connected without overloading the amplifier. Each pair of speakers is wired back indivi | ||
 |
30W 5V/6A Mini Screw Terminal Power SupplyM8418 |
|
| The Mean Well IRM-30-5ST 30W miniature AC-DC power supply is ready to be soldered onto the PCB boards of various kinds of electronic instruments or industrial automation equipment. | |
 |
600 Ohm / 600 Ohm Potted Telephone Isolati...M1015 ROHS |
| Impedance: 600 Ohm line matching Turns Ratio: 1:1 Insertion Loss: 4.7dB max @ 2kHz Frequency Response: 200Hz - 4kHz Return Loss: >15dB @ 200Hz - 4kHz Proof Test: 5.5kV RMS Max Unbalanced DC: 100µA Dimension: 18L x 14H x 18W Weight: 13 gms PCB hole size: 0.7mm | ||
 |
12.5V / 240V 1A EI Core TransformerM2152 |
|
| Powertran EI-Core 240V AC mains transformer with 1A centre tapped secondary configuration. 6.25V and 12.5V secondary voltages available at 1A current output. Primary and secondaries fitted with 200mm flyleads. Fully electrical authority approved for AS/NZS 61558.2.6. | |
 |
25 + 25 160VA Toroidal TransformerM5325C |
|
| Efficient toroidal transformer with 25V secondaries. 160VA rated. | |
 |
600 Ohm / 600 Ohm Telephone Isolation Tran...M1000 ROHS |
| Impedance: 600 Ohm line, 600 Ohm equip Turns Ratio: 1:1 Max Level: 0dBm @ 300Hz Insertion Loss: 1dB max @ 0dBm Frequency Response: 300Hz - 10kHz Return Loss: >15dB, 300Hz - 5kHz Max Unbalanced DC: 60mA Proof Test: 3.5kV RMS Dimension: 41L x 30H x 33W Weight: 153 gms PCB hole size: 1.5mm | ||
 |
600 Ohm / 600 Ohm Bridging Input TransformerM0709 ROHS |
| Impedance: 600Ω / 600Ω Freq. response: 20Hz - 30kHz Insertion loss: -0.5dB Max level: +20dBm @ 20Hz Weight: 63g | ||
 |
100V Line to 8 Ohm Speaker Transformer Ada...MB1140 |
|
| Designed to allow 8 ohm speakers to be utilised in a 100V line public address speaker system. Ideal for converting existing systems to 100V line or where 8 ohm speakers have been specified for a PA installation. | |
 |
MDR-60-24 60W 24VDC 2.5A DIN Rail Switchmo...M8409A |
|
| The Mean Well MDR-60-24 provides 24VDC 2.5A output with a rated power output of 60W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
30W 100V Line PA EI Core Audio TransformerM1126A |
|
| 30 Watt 100V line speaker transformer with multi-tapped primary and secondary taps to suit 4 and 8 ohm speakers. | |
 |
Unbalanced To Balanced Converter XLR-RCA /...A2516 NEW |
|
| Unbalanced 10K Ohm 2 x RCA to balanced 600 Ohm 3 pin male XLR (or optional screw terminal connections) with level control. | |
 |
25 + 25 500VA Toroidal TransformerM5725C |
|
| Toroidal transformers are becoming increasingly popular due to their improved magnetic properties and also that they can be made to a lower profile than a standard solenoid core transformer, allowing for equipment of similar power to be of a lower profile such as rack mounted devices. | |
 |
240/12+12 30VA Toroidal TransformerM4912C |
|
| Low profile design suitable for use inside our 1RU 19"rack enclosures. Potted epoxy centre core for easy mounting. | |
 |
25 + 25 300VA Toroidal TransformerM5525C |
|
| 25+25V 300VA toroidal transformer. | |
 |
500 Ohm / 8 Ohm Audio Coupling TransformerM0226 ROHS |
|
| Impedance: 500&Omega CT / 8&Omega Freq. Response: 300Hz-3kHz ±2.5dB Rated Power: 450mW Primary DC Resistance: 54&Omega ±10% Secondary DC Resistance: 0.8&Omega ±10% Fly Lead Length: 10mm | |
 |
150W 100V Line 4-16 Ohm Audio Toroidal Tra...M1124A |
|
| High power toroidal transformer for audio use. Input and output windings can be reversed. | |
 |
10k Ohm / 2k Ohm Audio Coupling TransformerM0212B |
| Impedance:10k ohm / 2 ohm CT Fly lead length:9mm PCB hole size:0.5mm | ||
 |
9 + 9V PCB 10VA Toroidal TransformerM4318 ROHS |
|
| Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for | |
 |
MDR-60-12 60W 12VDC 5A DIN Rail Switchmode...M8405A |
|
| The Mean Well MDR-60-12 provides 12VDC 5A output with a rated power output of 60W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
12.6V / 240V 500mA Centre Tapped EI Core ...M2853L |
|
| Primary and secondary fitted with 200mm fly leads. | |
 |
3VA 6+6V PCB TransformerM7012A ROHS |
|
| Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer. | |
 |
240/15+15 30VA Toroidal TransformerM4915C |
|
| These 30VA transformers will fit inside our 1 Unit 19" rack cases. | |
 |
240/25+25 30VA Toroidal TransformerM4925C |
|
| These 30VA transformers will fit inside our 1 Unit 19" rack cases. | |
 |
12 + 12 300VA Toroidal TransformerM5512C |
|
| Efficient toroidal transformer with 12V secondaries. 300VA rated. | |
 |
12 + 12 50VA Toroidal TransformerM5012C |
|
| Low profile design suitable for use inside our 1RU 19" rack enclosures. | |
 |
10VA 12+12V PCB TransformerM7264 ROHS |
|
| Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer. | |
 |
30 + 30 500VA Toroidal TransformerM5730C |
|
| Toroidal transformers are becoming increasingly popular due to their improved magnetic properties and also that they can be made to a lower profile than a standard solenoid core transformer, allowing for equipment of similar power to be of a lower profile such as rack mounted devices. | |
 |
3 Pin XLR Male to 3 Pin XLR Female Adapter...P0973 ROHS |
| Includes transformer for switching between 50kohm high impedance and 600ohm low impedance. | ||
 |
35 + 35 300VA Toroidal TransformerM5535C |
|
| Efficient toroidal transformer with 35V secondaries. 300VA rated. | |
 |
Stereo to Mono RCA AdapterA2518 NEW |
| This unit is designed to convert stereo audio signals into a summed mono line level RCA signal. | ||
 |
100W 100V Line PA Audio TransformerM1140 |
|
| These high power, high efficiency toroidal transformers are designed for matching 8 ohm speakers to 100V line amplifier systems. | |
 |
12 + 12 160VA Toroidal TransformerM5312C |
|
| Note: Must be used with a 3A external AC fuse. | |
 |
100W 100V Line 4-16 Ohm Audio Toroidal Tra...M1124 |
|
| High power toroidal transformer for audio use. Input and output windings can be reversed or be configured differently i.e. Input windings series connected for 100V and output windings paralleled for 4 Ohm. | |
 |
240/18+18 30VA Toroidal TransformerM4918C |
|
| Low profile design suitable for use inside our 1RU 19"rack enclosures. Potted epoxy centre core for easy mounting. | |
 |
12 + 12 80VA Toroidal TransformerM5112C |
|
| Certificate No.: CS 815/Q | |
 |
5VA 12+12V PCB TransformerM7064A ROHS |
|
| Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer. | |
 |
18 + 18 80VA Toroidal TransformerM5118C |
|
| Efficient toroidal transformer with 18V secondaries. 80VA rated. | |
 |
40W Attenuator 100V Line Audio TransformerM0440 |
|
| Used with 100v or 70V line PA systems. This enables the user to tap from the line the required level. Taps are spaced in 4.5db steps. Power rating 40 watts RMS. | |
 |
7.5v + 7.5V PCB 30VA Toroidal TransformerM4615 |
| Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for | ||
 |
18 + 18 160VA Toroidal TransformerM5318C |
|
| 18+18V 160VA toroidal transformer. | |
 |
3VA 12+12V PCB TransformerM7024A ROHS |
|
| Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer. | |
 |
9-24V / 240V 60VA EI Core TransformerM2165C NEW |
|
| Powertran EI-Core 240V AC mains transformer with 6.6A dual multi tapped secondary configuration. Two sets of 0V, 9V and 12V secondaries are available at a maximum current of 6.6A (max current when 9V secondaries connected in parallel) . Primary is fitted with 200mm flyleads. Secondary taps have solder tags. Fully electrical authority approved for A | |
 |
Pot Core Transformer PairL5300 |
|
| This transformer core has a low loss and is a high saturation grade, making it perfect for transformers and for use in switchmode power supply applications | |
 |
600 Ohm / 600 Ohm Mini Telephone Isolation...M1005 ROHS |
| Impedance: 600 Ohm line, 600 Ohm or 150 Ohm equip. Turns Ratio: 1:1 Max Level: +20dBm @ 200Hz Insertion Loss: 1dB max @ 0dBm Frequency Response: 200Hz - 3KHz Return Loss: >15dB, 200Hz - 3kHz Max Unbalanced DC: 5mA Proof Test: 3.5kV RMS Dimension: 26L x 21H x 19W Weight: 25 gms PCB hole size: 1.3mm | ||
 |
15 + 15 50VA Toroidal TransformerM5015C |
|
| These 50VA transformers will fit inside our 1 Unit 19" rack cases | |
 |
25 + 25V 50VA Toroidal TransformerM5025C |
|
| These 50VA transformers will fit inside our 1 Unit 19" rack cases | |
 |
24V / 240V 3A EI Core TransformerM2158C NEW |
|
| Powertran EI-Core 240V AC mains transformer with 3A single tap secondary configuration. 24V secondary voltage available at 3A current output. Primary and secondaries fitted with 200mm flyleads. Fully electrical authority approved for AS/NZS 61558.2.6. | |
 |
200VA 17+17V Class A Amplifier TransformerMA5417 |
| Primarily to be used as part of our K 5125 20 Watt Class A Amplifier Kit. We can now offer this component as a standalone item for those who wish to build this amplifier in a different housing to that supplied with the kit. | ||
 |
240/9+9 30VA Toroidal TransformerM4909B |
|
| Low profile design suitable for use inside our 1RU 19"rack enclosures. Potted epoxy centre core for easy mounting. | |
 |
240/9+9 30VA Toroidal TransformerM4909C |
|
| Low profile design suitable for use inside our 1RU 19"rack enclosures. Potted epoxy centre core for easy mounting. | |
 |
3VA 9+9V PCB TransformerM7018A ROHS |
|
| Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer. | |
 |
15 + 15 80VA Toroidal TransformerM5115C |
|
| Efficient toroidal transformer with 15V secondaries. 80VA rated. | |
 |
12 + 12 PCB 10VA Toroidal TransformerM4324A |
|
| Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for | |
 |
15 + 15 PCB 30VA Toroidal TransformerM4630A |
|
| Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for ideal for high performance, low noise circuits. | |
 |
10VA 15+15V PCB TransformerM7270 ROHS |
|
| Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer. | |
 |
Balanced To Unbalanced Converter XLR-RCA /...A2515 NEW |
|
| Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections). | |
 |
25 + 25 80VA Toroidal TransformerM5125C |
|
| Efficient toroidal transformer with 25V secondaries. 80VA rated. | |
 |
45 + 45 160VA Toroidal TransformerM5345A |
|
| Efficient toroidal transformer with 45V secondaries. 160VA rated. | |
 |
30 + 30 300VA Toroidal TransformerM5530C |
|
| Efficient toroidal transformer with 30V secondaries. 300VA rated. | |
 |
12 + 12 PCB 30VA Toroidal TransformerM4624A |
|
| Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for | |
 |
18 + 18 300VA Toroidal TransformerM5518C |
|
| 300VA toroidal transformer | |
 |
18 + 18 50VA Toroidal TransformerM5018C |
|
| Low profile design suitable for use inside our 1RU 19" rack enclosures. 18+18V. | |
 |
12.6V / 240V 300mA Centre Tapped EI Core ...M2852L |
|
| Primary and secondary fitted with 200mm fly leads. |
100% developed, designed & assembled in Australia.
