|
Description |
Downloads |
Specs |
Ordering |
|
|
A4835 |
|
- CSP transfer protocol with Dante compatible converters available (see A 4830/31)
- Local power input (powered at one end of cable run)
- Maximum distance over Cat6 cable: 1200 metres.
|
|
This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances. |
|
A4834 |
|
- Transmits three balanced audio signals or 3 unbalanced line level signals
- CSP transfer protocol with Dante compatible converters available (see A 4830/31)
- Local power input (powered at one end of cable run)
|
|
This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances. |
|
A4832 |
|
- Design Transceiver and Receiver in one Module
- Provides the Power to Connected Receivers
- Sends Left and Right Audio Channels
- Unbalanced Stereo RCA Input from Audio Source
- Balanced 3.5 Jack Audio Input from Mono Source
- Audio Signal Goes to two UTP RJ45 Outputs
- CSP Receiver Compatible with all 2 pair transceiver wallplates
- Two RCA stereo unbalanced outputs
- L (Left) Output Goes to Pair B; R (Right) Goes to Pair C
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
A compact system hub for interfacing input and output wallplates together with existing zone audio amplifiers and audio sources. |
|
A4831 |
|
|
|
Interfaces 2 input and 4 output CSP UTP wallplates with Dante® systems |
|
A4830 |
|
|
|
Interfaces 1 input and 1 output CSP UTP wallplates with Dante® systems. |
|
A4828 |
|
- Stereo RCA Jack Audio Outputs
- Signals from Pair B(L) and Pair C(R).
- Source Loop
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
|
|
This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4827 |
|
- Balanced MIC XLR Output
- Selector switch MIC GAIN
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45 Jacks
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This 3 pin XLR Balanced Output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4826 |
|
- XLR / RCA Audio Output,
- Gain Switch XLR only
- Signals from Pair A(XLR), Pair B(L) and Pair C(R).
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
|
|
This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
|
|
A4825 |
|
- Two Balanced Microphone XLR Inputs
- Switch-Selectable Mic Gain and 48V Phantom Power on Side Panel
- Output Pair Selectors to go to Pair (A, B or C) for Each MIC Input
- Signal and Power Pairs Pass-Through on RJ45 jacks
- Daisy-Chain with a Single-Pair UTP Sender
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This Dual 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4824 |
|
- Balanced MIC XLR Input
- Selector switch MIC GAIN
- RCA Jack Audio Inputs
- XLR Goes to Pair A; L (Left) Goes to Pair B; R (Right) Goes to Pair C.
- Signal and Power Pair Pass-Through on RJ45 jack
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4822 |
|
- RCA Jack Audio Inputs
- L (Left) Output Goes to Pair B; R (Right) Output Goes to Pair C
- Signal and Power Pair Pass-Through on RJ45 jacks
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4821 |
|
- Mini / RCA(MONO) Jacks Audio Inputs
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45 jacks
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This Stereo RCA and 3.5mm Jack Wallaplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4820 |
|
- Balanced MIC XLR Input
- Selector switch MIC GAIN
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45 jacks
- Power can be linked to the removable terminal
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
|
A4580 |
|
- Amplifier 100V level or low level balanced line switching
- Selectable pre and post announcement chimes via A4660 (Internal or MP3/SD card based)
- Selectable BGM for each zone
- Accepts up to 8 paging consoles
- Expandable up to 32 zones with additional A 4580
- Paging consoles connect via Cat 5 cable
- Paging consoles can be up to 200m from control box
- Operates from 24V DC plugpack (supplied)
- All inputs/outputs via pluggable terminals
- Suitable for 1 or 2 amplifier systems
- Evac "All Call" input for emergency tones or telephone paging.
- Maximum 500W power handling over 16 zones
- 1U 19” rack mount
|
|
This unit is a very versatile cost effective public address/background music control system which provides audio to up to 16 zones. Backgound music which can be selected to play through any zone is muted when general paging occurs or when an evacuation input overrides the system. |
|
C8844B |
|
- Frequency Range: 500MHz-1GHz
- Voltage Standing Wave Ratio : <2
- Input Impedance: 50 ohms
- Isolation: 12dB
- Loss: <4.5dB
- RF Connector: BNC Female Type
- Dimensions: 40W x 32D x 28Hmm
|
|
This splitter can be used to split a reception signal into two outgoing signals (one input to two output) or combine two reception signals into one outgoing signal (two input to one output). |
|
A4411 |
|
- 2 microphone inputs
- Phantom power on MIc inputs (15V DC)
- 2 line inputs
- Separate tone controls for line and microphones
- Stereo outputs
- 1RU 19” rack mount case
- Master volume on rear panel
- Adjustable line muting
- Front panel mount microphone and line input
- Subwoofer output
- LED VU meter
- VOX active indicator
- Signal Present indicator
- 24V DC input
- 24V DC battery back up terminals
- 10 Year Warranty
- Australian designed & assembled
|
|
This 4 Channel Stereo Mixer has been designed to meet the growing demands of PA systems utilising high power stereo amplifiers, it features 2 balanced microphone and 2 auxiliary inputs. Perfect for aerobics use, bars, bistros, sporting clubs. |
|
C7116 |
|
|
|
A comfortable presenters headset microphone for use with equipment with 3.5mm TS input. Fitted with braided lead for added durability and adjustable boom mic for excellent audio pick up. |
|
A2069 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The Redback® A 2069 Remote Plate allows the Redback® A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. Connections up to 30m away can be made via standard Cat 5 cabling. |
|
A6512 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
These compact modules are designed to remotely alter the volume of any low level signal source feeding any amplifier or mixer remotely, via RS 232 or RS 485 serial control. They will interface with the Redback A 6500 wallplate or any other 3rd party control system. Requires 24V DC power supply. Includes one input with remote volume adjustment via s |
|
A6507 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This compact module includes a seven step 100V line speaker attenuator/volume control which can be remotely adjusted via RS 485 serial control. |
|
H5177 |
|
|
|
Provides internal protection for racks from dust and debris whilst still allowing terminated cables to enter for quick connection when you need it. |
|
A4861 |
|
- 200W into 4 ohms
- Stereo RCA input
- Speaker level input and outputs
- Adjustable phase and crossover frequency
- Volume level control
- 240V AC operation
|
|
A compact dedicated subwoofer amplifier providing up to 200W into 4 ohms. Ideally paired with the A 4860 and C 1065 ceiling subwoofer, but is also suitable for any passive subwoofer. Ideal for integration with commercial systems in fashion boutiques, shopping centres, gymnasiums etc. Front panel provides level control, phase adjustment and crossov |
|
A4860 |
|
- Class-D 2 x 50W amplifier
- Bluetooth 4.2 wireless streaming
- Stereo RCA & 3.5mm jack inputs
- Optical input with high performance DAC
- Automatic signal switching with priority for Bluetooth audio source
- 240V AC operation
|
|
A compact bluetooth stereo amplifier for home and commercial sound systems. Features a high spec Class-D 2x50W RMS amplifier and optical input for connection to digital audio sources. Pairs well with the A4861 200W subwoofer amplifer. |
|
C0357 |
|
- Uses the isolated voltage-boosting technology to effectively prevent the ground signal interference
- The built-in-low pass filter circuit design allows you to fully filter out the interference noise from the external audio equipment
- Soft start function to avoid the impulsive sound when boosting the device
- Uses two sets of balanced power supply, to balance the input and output signals which in turn makes the voltage balanced and stable
|
|
A compact single channel phantom power supply with 3 pin XLR female balanced input and 3 pin XLR male balanced 48V output.
Includes power supply.
Size: 88W x 47H x 92Dmm |
|
A4928 |
|
- Connects to a variety of compatible Redback UTP transmitters
- Easy Cat5e/6 UTP data cabling connection.
- Up to 300m cable runs out to wallplate/box.
- Balanced Euro terminal block connections.
- Balanced mic or line level operation.
- 24V DC operation.
- Australian designed & assembled.
|
|
A single mic/line output box designed to operate with A 4931 and A 4932 zone connection boxes. |
|
A4173A |
|
- Rugged heavy duty construction
- 19” rack mount
- Bridgeable, parallel or two channel stereo operation
- Earth lift switch
- 3 pin XLR inputs.
- Short circuit protection with indicator
- Overload protection with indicator
- Clipping prevention circuitry with indicator
- Variable speed fan forced cooling
- Muting circuit for switch on/off
|
|
This new series dubbed the "Apple" range have been completely redesigned by Biema to offer vastly improved cooling, efficiency and circuit protection. This range is designed to function as a stereo or high power single channel amplifier for use in foreground sound reinforcement ie: pubs, clubs, cinemas and multi-function venues. |
|
A1116 |
|
|
|
This 2x25W RMS amplifier module with Bluetooth receiver sticks to your speaker magnet and connects to a pair of in-ceiling/in-wall speakers. Easy to install and works with Bluetooth enabled devices such as smartphones, tablets and laptops. Includes 15V power supply. |
|
A4199 |
|
- Amplifier type: Class D stereo
- Output power: 15W RMS per channel @ 4 ohm
- Distortion: 0.06%
- Headphone output: 105mW RMS per channel
- Headphone distortion: 0.05%
- Min load: 4Ω
- Current draw: 9A max.
- Power: 12V DC
- Dimensions: 285W x 128D x 43Hmm
- Weight: 0.8kg
|
|
Ideal for small businesses or simple multi-zone home audio systems. Switch between up to 4 different audio sources - connect up to 8 speakers. Toslink digital audio input for TV audio. Great for background music use. Also fitted with 6.35mm microphone connection. |
|
A4373 |
|
- Maximum volume setting
- Minimum volume setting
- Australian designed and assembled
|
|
When fitted and used in conjunction with A 2280B wallplate to provide remote volume level adjustment. Ideal for situations where the amplifier is located in a remote rack. Plugs into the amplifier internally on the main board. |
|
A5138 |
|
- Input Mic Level Sensitivity: 3mV
- Output Connector: RJ45 8P8C
- Input Connector: 5 pin XLR balanced
|
|
The A5138 UTP wall plate has a standard 5 Pin XLR connector for connection of microphones with PTT switches. |
|
A5135 |
|
- Connects to four paging microphones via A 5138 wallplates or other Redback UTP transmitter at each location
- Built for supermarkets, food outlets or anywhere multiple paging microphones are in use
- Easy Cat5e/6 cabling back to hub
- Adjustable VOX sensitivity
- PTT muting
- 24V DC operation
- BGM input
- Balanced & line outputs
- Australian designed & assembled.
|
|
Designed with small supermarkets in mind. We've designed the hub to cater for industry standard supermarket 5 pin XLR microphones which connects to a local wallplate (A 5138) over a Cat5/6 cable. |
|
H4622 |
|
|
|
This unique design is supplied flat pack in a single piece and is assembled into a complete wall mount rack system after just tightening a few screws! Depth is adjustable (see dimensions below). Ideal for patch panels, security or comms equipment. Max weight rating: 12kg. |
|
H4621 |
|
|
|
This unique design is supplied flat pack in a single piece and is assembled into a complete wall mount rack system after just tightening a few screws! Depth is adjustable (see dimensions below). Ideal for patch panels, security or comms equipment. Max weight rating: 12kg. |
|
H4620 |
|
|
|
This unique design is supplied flat pack in a single piece and is assembled into a complete wall mount rack system after just tightening a few screws! Depth is adjustable (see dimensions below). Ideal for patch panels, security or comms equipment. Max weight rating: 12kg. |
|
A4043 |
|
- 3 balanced microphone inputs
- Phantom power on mic inputs
- 3 line inputs
- 19” rack mount kit included
- VOX muting
- Tape output RCA sockets
- Bass and treble tone controls
- 100V line output
- 240V AC or 24V DC operation
- Built in short circuit protection
- 10 year warranty
- Optional evac module available
- Optional remote volume module
- Australian designed & assembled
|
|
Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 100W RMS respectively. |
|
A4037 |
|
- 3 balanced microphone inputs
- Phantom power on mic inputs
- 3 line inputs
- 19” rack mount kit included
- VOX muting
- Tape output RCA sockets
- Bass and treble tone controls
- 100V line output
- 240V AC or 24V DC operation
- Built in short circuit protection
- 10 year warranty
- Optional evac module available
- Optional remote volume module
- Australian designed & assembled
|
|
Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 40W RMS respectively. |
|
A4047 |
|
- 3 balanced microphone inputs
- Phantom power on mic inputs
- 3 line inputs
- 19” rack mount kit included
- VOX muting
- Tape output RCA sockets
- Bass and treble tone controls
- 100V line output
- 240V AC or 24V DC operation
- Built in short circuit protection
- 10 year warranty
- Optional evac module available
- Optional remote volume module
- Australian designed & assembled
|
|
Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 100W RMS respectively. |
|
A4433 |
|
- Connects to A4432 mixer and A4931/32 local input
- Provides input selection options for four sources.
- Local volume level control.
- Selected source level control.
- Fits standard electrical wall box.
- Easy connection to A4432 via Cat5e/6 UTP data cabling.
- Powered over ethernet.
- Australian designed & assembled
|
|
A touchscreen control wallplate to suit the A 4432 Redback mixer. Allows quick and easy source selection, muting, level control for programming, plus local input level control (when used with A 4931/ A 4932). |
|
H5351 |
|
|
|
Heavy duty rack shelf to suit all standard 19 inch racking systems. All models supplied in flat pack form - assembles in minutes. Simply screws to the rack frame. Suitable for equipment that does not rack mount, e.g. C.D. players, tuners, amplifiers, digital video recorders, monitors, etc. Maximum load 20kg. |
|
H5138 |
|
|
|
A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inwards. Coated in a hard wearing stippled black powdercoat. |
|
H5137 |
|
|
|
A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inwards. Coated in a hard wearing stippled black powdercoat. |
|
H5136 |
|
|
|
A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inwards. Coated in a hard wearing stippled black powdercoat. |
|
H5150 |
|
|
|
A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. Ideal for any 19" rack system which requires additional airflow to help keep equipment cool. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inward |
|
H5149 |
|
|
|
A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. Ideal for any 19" rack system which requires additional airflow to help keep equipment cool. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inward |
|
A2776C |
|
- Bluetooth compatible for wireless music streaming This AV receiver is equipped with Bluetooth functionality to let you enjoy easy wireless music playback from smartphones and other devices. Yamaha Compressed Music Enhancer is now optimised for Bluetooth audio transmission to ensure that your music will have vivid, lively sound quality even during wireless playback.
- 4K Ultra HD full support with 4K60p, HDCP2.2 This AV receiver completely supports with the latest HDMI standards. Thanks to transmission of 4K video at 60 frames per second pass-through, you can fully enjoy the high definition video quality of 4K without degradation. It also adheres to the HDCP2.2 copyright protection standard for 4K video transmission.
- HDMI with 3D and Audio Return Channel 3D means the receiver can handle 3D signal data. The Audio Return Channel function enables data to be sent and received via the same HDMI cable, so you can hear the sound from the TV via a single HDMI cable, with no need for an extra optical cable.
- Discrete amp configuration for high sound quality This AV receiver was designed with a strong focus on achieving exceptionally high sound clarity. It employs a discrete amp configuration and a low jitter PLL circuit, which contribute to its excellent audio performance.
- AV setup guide app makes system setup easier AV Setup Guide is an app that makes it much easier to perform receiver setup, and also assists you with cable connections between the AV receiver and source devices. It guides you through various settings such as speaker connections, TV and source device connections and power amp assignment. System illustrations and actual AV receiver images help you understand how to make the connections between devices, for much quicker system setup. It is available in multiple languages. Designed for iOS and Android tablet.
- SCENE for one-touch start Pressing a SCENE button powers on the AV Receiver and selects the input source and DSP mode. You can re-set the buttons for different sources by selecting a source and DSP mode, then pressing a SCENE button for more than three seconds.
- HDMI CEC for easy operation Another benefit of HDMI is the availability of CEC functionality. When the unit is connected to a CEC compatible TV, it will turn on and off together with the TV, and you can use the TV remote to control the volume. CEC also provides advanced functionality with other components. For example, you can use the receiver’s remote unit to control player functions like Skip and Stop. NOTE: All connected devices must be HDMI CEC compatible. Some CEC compatible TVs / players may not work.
- YPAO sound optimisation for automatic speaker setup YPAO analyses the room acoustics and adjusts various audio parameters for optimum sound in just a few minutes. It’s like having a professional installer calibrate your system.
- HD audio with CINEMA DSP Yamaha’s exclusive CINEMA DSP technology supports playback of HD Audio (Dolby TrueHD, DTS-HD Master Audio, etc.), providing natural and expansive sound imaging.
- Virtual CINEMA FRONT provides irtual 5-channel surround sound with high quality and resolution Even when it is impossible to install surround speakers behind the listening position, Virtual CINEMA DSP reproduces virtual 5-channel surround sound filled with realism, with only two front speakers. With Virtual CINEMA FRONT, you will enjoy virtual 5-channel surround sound with higher quality and resolution by installing surround speakers at the front. You get more flexibility to arrange your speakers inside the room, along with easy enjoyment of high quality surround sound.
- Extra Bass provides rich bass reproduction, even with small speakers Yamaha’ s exclusive low-range enhancement technology delivers richer bass than you expect from the speaker size while maintaining good localisation and sound balance even with compact front speakers. When a subwoofer is used, it improves the volume of the entire low range of the speaker system, not only the front speakers, but also enhancing the bass from the subwoofer. You'll enjoy video and music with sound that has exceptional power and presence.
- Compressed Music Enhancer When music is encoded into a digitally compressed format like MP3, the frequency response suffers. Yamaha’s Compressed Music Enhancer employs sophisticated digital signal processing using exclusive algorithms to restore what was lost, so the music always sounds the way it should.
- Subwoofer Trim for improved sound imaging The Subwoofer Trim control enhances the low frequencies by avoiding overlap with the front speaker output. This will result in a cleaner, more focused sound stage while providing a seamless frequency response. When subwoofer frequency overlap occurs in conventional systems, the overall sound is “pushed” toward the subwoofer. Subwoofer Trim takes care of this by separating the low subwoofer frequencies cleanly, thus stabilising the front stage while providing a well-balanced enhanced bass sound.
- ECO mode lowers power consumption by 20%* Yamaha’s new ECO mode reduces power consumption by about 20%. It can be set from the top of the GUI menu. NOTE: Compared to power consumption when ECO mode is off (Yamaha measurement).
- Selectable auto power standby Auto Power Standby lets you save energy by selecting to turn off the power after 20 minutes, 2, 4, 8 or 12 hours.
|
|
The all-new RX-V385 model is wireless-enabled, with streaming from Bluetooth devices at the touch of a button. Movie watchers are also catered for with 4K Ultra HD as well as HDMI 2.0, BT.2020 compatibility and HDCP 2.2, HDR video. 70W RMS per channel. Four HDMI inputs. AM/FM analog tuner. |
|
C7194A |
|
|
|
This charging pod will charge 2x C7195C belt pack transmitters so you don't have to keep changing the batteries . |
|
C9620A |
|
|
|
This unit will convert speaker level output from a head unit to a low level input suitable for feeding directly into an amplifier input. |
|
A4432 |
|
- Four Mic/ Line Input channels (Inputs 1-4)
- Four switched RCA AUX Input channels
- Remote AUX source selection, volume and Local input source volume control via optional A 4433 and A 4931 wall plates
- PTT Input and 24V PTT output (limited to 120mA) on inputs 1-4
- Micro SD card based Alert/Evac/Chime/Voice-over module (In built)
- Individual level, bass and treble control on all inputs
- 3.5mm music input overrides AUX 4
- Three levels of priority
- Adjustable Vox sensitivity on inputs 1-4
- Adjustable input sensitivity 1V/100mV on inputs 1-4 and Aux inputs 1-4
- Phantom Power on inputs 1-4
- Tape out (Dual RCA)
- Balanced Output (XLR male)
- Five sets of closing contacts for message triggering (Alert/Evac/Ch1/Ch2/Cancel)
- 24V DC switched output (Limited to 120mA)
- MP3 active indicator
- Signal Present indicator
- LED VU Meter
- 24V DC operation (Plugpack Supplied)
- 24V DC battery back up terminals
|
|
Designed in conjunction with pro-sound contractors, the A 4432 is a stand alone mixer which provides a flexible way to bring multiple audio sources together. It combines many of the best features from our popular mixer and signal processing range into one compact unit. |
|
HD5912 |
|
|
|
An open frame 12RU 19 inch rack system designed for wall mounting equipment up to 300mm deep. Ideal for combinations of patch panels, security and audio equipment. The flat mounting plates can be attached to the wall surface using standard fasteners. |
|
C7317A |
|
|
|
Designed to fit the portable PA systems that are 640MHz. Please check the frequency of your microphones/Okayo PA before making your purchase. |